ReSound LX800-M Manual de usuario

USER GUIDE

REMOTE MICROPHONE

Intended use

Generic air-conduction hearing instruments are wearable sound-amplifying devices intended to compen-

sate for impaired hearing. The fundamental operating principle of hearing instruments is to receive, amplify,

and transfer sound to the ear drum of a hearing impaired person.

Introduction

Congratulations on the purchase of your new hearing instruments. ReSound’s innovative

sound technology and design, combined with the customized programming selected by your hear-

ing care professional, will make hearing a more enjoyable experience. Hearing instruments will en-

able you to hear sounds that you may not have heard in years because of your hearing loss. Prac-

tice and a positive attitude are important in learning to use hearing instruments. Your ReSound

instruments have been adjusted according to your individual hearing loss and needs. Some people

adjust quickly to wearing hearing instruments in their ears and hearing new sounds; other

people may need more time.

Please read this manual carefully in order to wholly beneﬁt from the use of your hearing instruments. With

proper care, maintenance, and usage, your hearing instruments will aid you in better communication for

many years. Ask your hearing care professional if you have any questions.

ReSound is a registred trade mark of GN ReSound A/S

Hearing instrument model:

Battery size 10

Tube size:

Dome size:

Left serial number:

Right serial number:

Intended use ...........................2

Introduction ............................2

The parts of your hearing instrument .........6

Switching on and off .....................7

SmartStart.............................7

Changing batteries.......................8

Low battery indicator .....................9

Inserting the hearing instrument .............9

Removing the hearing instrument ...........11

Telephone use ........................11

Listen to radio or TV ....................12

Cellular phones ........................12

Care and maintenance...................13

Daily maintenance ......................14

The microphone tube....................14

Wax ﬁlter .............................14

To replace the wax ﬁlter ..................14

How to apply domes ....................16

General precautions.....................16

General warnings.......................16

Battery warning Information ...............17

Important Notice for Prospective

Hearing Aid Users (US only) ...............18

Children with hearing loss (US only) .........19

Warning to Hearing Aid Dispensers (US only) ..19

Troubleshooting guide ...................20

Technical data .........................24

Warranty and repairs ....................24

Temperature test, transport and

storage information......................25

Contents

Instant ﬁt remote mic hearing instrument models with size10A battery are available in following variants:

LX800-M and LX400-M

The parts of your hearing instrument

1. Body

2. Sound Outlet/Receiver (under wax ﬁlter)

3. Wax Filter

4. Battery Door

5. Microphone Tubing

6. Microphone

7. Microphone Outlets

8. Model and Serial Number

Switching on and off

Your instrument is equipped with an on/off switch integrated into the battery

compartment. When the battery compartment is fully closed, the instru-

ment is turned on.

To turn the instrument off grasp the battery compartment door with your

ﬁngernail and gently pull downwards. The power will switch off at the point

where you can feel a small click.

At night, switch off your instrument and open the battery door completely.

It allows moisture in your instrument to evaporate and will increase the instrument’s life

span.

iSwitch your instrument off if you are not using it. This will increase the battery life.

After switching on the device, the volume will be as set by your hearing care practitioner. Read more on

this subject on page 22.

SmartStart

Hearing instruments can be turned on once you have placed them on your ears. If you prefer to turn them

on just prior to placing them on your ear, your hearing care professional can activate a function called

SmartStart. This function will delay the time in which the hearing instruments turn on by several seconds

after the battery compartment is closed. With SmartStart, a beep will be heard for each second of the

delay period.

Changing batteries

When the battery voltage/power decreases to a certain level, the instrument will emit a soft beeping signal.

This signal will continue for about one minute, and the sequence will continue every ﬁve minutes until the

instrument will be automatically switched off. It is therefore advisable to keep an extra battery at hand.

• Remove the protective seal from the fresh battery and

insert it in the battery door, with the plus side facing up.

You will recognize the plus side of the battery because

marked with a +. Check whether the + symbols on the

battery and on the battery door are on the same side.

• Always insert a battery in the opened door, never di-

rectly into the instrument.

• A new battery should be inserted into the battery com-

partment with the microphone tubing pointed up.

Close the battery door. This should go smoothly, so never force it as this could damage

your instrument.

iRemove the batteries to prevent battery leakage or corrosion when the hearing instruments are not

in use for an extended period of time.

iAlways use new Zinc-Air batteries that have a minimum remaining shelf-life of 1 year.

Low battery indicator

Your hearing care professional can activate a low battery indicator in your hearing instruments. The hear-

ing instrument will reduce ampliﬁcation and play a melody if battery power gets too low. This signal will

recur every ﬁve minutes until the hearing instrument automatically switches off. The timing of the low bat-

tery indicator can vary slightly, depending on the type of battery used. It is recommended that you keep

spare batteries on hand.

Inserting the hearing instrument

1. Determine if you have a left or right instrument in

your hand. At the tip of the device, or with the battery

compartment open, you will see either a RED or BLUE

marker:

• The hearing instrument with the RED marker is always

for the RIGHT ear.

• The hearing instrument with the BLUE marker is always

for the LEFT ear.

2. Check that the body of the hearing instrument feels

smooth before inserting into your ear canal. If the surface

feels spiky or rough, contact your hearing care profes-

sional.

3. Grasp the instrument near the base, where the tubing

connects to the battery compartment, with your index

ﬁnger on top and your thumb on bottom. RIGHT (RED)LEFT (BLUE)

Notice that the battery door is pointing up. This is the correct way to insert the instrument.

4. When properly lined up, gently push the hearing instru-

ment into the ear canal until it is ﬂush with the opening

of the ear canal.

5. After the hearing instrument has been properly seated

in the ear canal, locate microphone and tubing.

6. Gently push the microphone into the creased area of

the ear that is located above the ear canal entrance.

7. After the microphone is in place, push the tubing into

place.

8. This drawing shows how the hearing instrument should

look when inserted properly into the ear canal. It is im-

portant that the microphone tube ﬁts correctly in your

ear. If the microphone tube irritates your ear,

please contact your hearing care professional.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Audífono de ReSound

ReSound

ReSound Match Series Manual de usuario

ReSound

ReSound LINX 3D Manual de usuario

ReSound

ReSound ENZO2 88 Manual de usuario

ReSound

ReSound LiNX Quattro CSX12 Manual de usuario

ReSound

ReSound LINX 3D Manual de usuario

ReSound

ReSound LiNX Quattro 88 Manual de usuario

ReSound

ReSound LiNX 3D 88 Manual de usuario

ReSound

ReSound X-plore BTE XE61-DI Manual de usuario

ReSound

ReSound KE461-DRWC Manual de usuario

ReSound

ReSound 10 CIC Manual de usuario

ReSound

ReSound X-plore BTE XE71-DVI Manual de usuario

ReSound

ReSound Vea Manual de usuario

ReSound

ReSound RP30 Manual de usuario

ReSound

ReSound Ziga ZG30 Manual de usuario

ReSound

ReSound TrimFlex Plus BTE Manual de usuario

ReSound

ReSound Pulse PS60 Manual de usuario

ReSound

ReSound LiNX3D 67 Manual de usuario

ReSound

ReSound ENYA Manual de usuario

ReSound

ReSound Linx Quattro Manual de usuario

ReSound

ReSound ONE 9 Manual de usuario

ReSound

ReSound 60 series Manual de usuario

ReSound

ReSound RT977-DWC Manual de usuario

ReSound

ReSound SY312 Manual de usuario

ReSound

ReSound Verso Instrucciones de montaje

Manuales populares de Audífono de otras marcas

Sonic

Sonic Bliss miniBTE Manual de usuario

Lexie

Lexie B1 Manual de lista de piezas

Widex

Widex FM+DEX Manual de usuario

Siemens

Siemens Triano Manual de usuario

Camplicomms

Camplicomms HC-200 Manual de usuario

Widex

Widex SUPER 220 S2-VSD Manual de usuario

Phonak

Phonak Q90 Manual de usuario

Williams Sound

Williams Sound SoundPlus WIR 237 Guía

Oticon Medical

Oticon Medical Ponto SoundConnector Manual de usuario

Siemens

Siemens Life micon Manual de usuario

Starkey

Starkey Destiny Manual de usuario

Audicus

Audicus The Icon Manual de usuario

Advanced Bionics

Advanced Bionics Slim HP Standard Manual de usuario

Widex

Widex DREAM440 THE DREAM SERIES Manual de usuario

Phonak

Phonak myPilot Manual de usuario

NIKEN

NIKEN NK-401 Manual de usuario

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Manual de usuario

Sonetik

Sonetik GOHEAR Manual de usuario