Renesas QB-78K0FX1 Manual de usuario

CUSTOMER NOTIFICATION

U17534EJ1V0UM00

Apr 27th, 2005

Tadayoshi Mori, Manager

Automotive Systems Division

4th Systems Operations Unit

NEC Electronics Corporation

(Created by Takashi Fuchigami)

CP(K), O

QB-78K0FX1

(IECUBE for 78K0/Fx1+)

User’s Manual

Target Device:

78K0/FC1+

78K0/FE1+

78K0/FF1+

[MEMO]

User’s Manual U17534EJ1V0UM00

PC/AT is a trademark of International Business Machines Corporation.

The information in this document is current as of March, 2004. The information is subject to change

without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or

data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all

products and/or types are available in every country. Please check with an NEC Electronics sales

representative for availability and additional information.

No part of this document may be copied or reproduced in any form or by any means without the prior

written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may

appear in this document.

NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual

property rights of third parties by or arising from the use of NEC Electronics products listed in this document

or any other liability arising from the use of such products. No license, express, implied or otherwise, is

granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.

Descriptions of circuits, software and other related information in this document are provided for illustrative

purposes in semiconductor product operation and application examples. The incorporation of these

circuits, software and information in the design of a customer's equipment shall be done under the full

responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by

customers or third parties arising from the use of these circuits, software and information.

While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,

customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To

minimize risks of damage to property or injury (including death) to persons arising from defects in NEC

Electronics products, customers must incorporate sufficient safety measures in their design, such as

redundancy, fire-containment and anti-failure features.

NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and

"Specific".

The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-

designated "quality assurance program" for a specific application. The recommended applications of an NEC

Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of

each NEC Electronics product before using it in a particular application.

"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio

and visual equipment, home electronic appliances, machine tools, personal electronic equipment

and industrial robots.

"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designed

for life support).

"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems and medical equipment for life support, etc.

The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC

Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications

not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to

determine NEC Electronics' willingness to support a given application.

(Note)

(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its

majority-owned subsidiaries.

(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as

defined above).

•

M8E 02.11-1

User’s Manual U17534EJ1V0UM00 3

Regional Information

•

Device availability

•

Ordering information

•

Product release schedule

•

Availability of related technical literature

•

Development environment specifications (for example, specifications for third-party tools and

components, host computers, power plugs, AC supply voltages, and so forth)

•

Network requirements

In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary

from country to country.

[GLOBAL SUPPORT]

http://www.necel.com/en/support/support.html

NEC Electronics America, Inc. (U.S.)

Santa Clara, California

Tel: 408-588-6000

800-366-9782

NEC Electronics Hong Kong Ltd.

Hong Kong

Tel: 2886-9318

NEC Electronics Hong Kong Ltd.

Seoul Branch

Seoul, Korea

Tel: 02-558-3737

NEC Electronics Shanghai Ltd.

Shanghai, P.R. China

Tel: 021-5888-5400

NEC Electronics Taiwan Ltd.

Taipei, Taiwan

Tel: 02-2719-2377

NEC Electronics Singapore Pte. Ltd.

Novena Square, Singapore

Tel: 6253-8311

J04.1

EC Electronics (Europe) GmbH

Duesseldorf, Germany

Tel: 0211-65030

•

Sucursal en España

Madrid, Spain

Tel: 091-504 27 87

Vélizy-Villacoublay,France

Tel: 01-30-675800

•

Succursale Française

•

Filiale Italiana

Milano, Italy

Tel: 02-66 75 41

•

Branch The Netherlands

Eindhoven,TheNetherlands

Tel: 040-2445845

•

Tyskland Filial

Taeby, Sweden

Tel: 08-63 80 820

•

United Kingdom Branch

Milton Keynes, UK

Tel: 01908-691-133

Some information contained in this document may vary from country to country. Before using any NEC

Electronics product in your application, pIease contact the NEC Electronics office in your country to

obtain a list of authorized representatives and distributors. They will verify:

User’s Manual U17534EJ1V0UM00

INTRODUCTION

Readers This manual is intended for users who wish to perform debugging using

the QB-78K0FX1. The readers of this manual are assumed to be familiar

with the device functions and usage, and to have knowledge of

debuggers.

Purpose This manual is intended to give users an understanding of the basic

specifications and correct usage of the QB-78K0FX1.

Organization This manual is divided into following parts.

•General

•Setup procedure

•Settings at product shipment

•Differences between target device and target interface circuit

•Cautions

•Restrictions

How to Read This ManualIt is assumed that the readers of this manual have general knowledge in

the fields of electrical engineering, logic circuits, and microcontrollers.

This manual describes the basic setup procedures and how to set

switches.

To understand the overall functions and usages of the QB-78K0FX1

→Read this manual according to the CONTENTS.

To know the manipulations, command functions, and other

software-related settings of the QB-78K0FX1

→See the user’s manual of the debugger (supplied with the

QB-78K0FX1) to be used.

Conventions Note: Footnote for item marked with Note in the text

Caution: Information requiring particular attention

Remark: Supplementary information

Numeric representation: Binary ... xxxx or xxxxB

Decimal ... xxxx

Hexadecimal ... xxxxH

Prefix indicating power of 2

(address space, memory

capacity): K (kilo): 210 = 1,024

M (mega): 220 = 1,0242

User’s Manual U17534EJ1V0UM00 5

Terminology The meanings of the terms used in this manual are described in the table

below.

Term Meaning

Target device This is the device to be emulated.

Target system This is the system to be debugged.

This includes the target program and the hardware provided by the user.

78K0Fx1+ Generic name indicating 78K0/FC1+, 78K0/FE1+, 78K0/FF1+.

Related Documents Please use the following documents in conjunction with this manual.

The related documents listed below may include preliminary versions.

However, preliminary versions are not marked as such.

Documents Related to Development Tools (User’s Manuals)

Document Name Document Number

QB-78K0FX1 In-Circuit Emulator This manual

Operation U17015E

Language U17014E

RA78K0 Assembler Package Ver. 3.70

Structured Assembly Language U11789E

Operation U17017ECC78K0 C Compiler Ver. 3.60

Language U17016E

ID78K0-QB Ver. 2.81 Integrated Debugger Operation U16996E

PM plus Ver. 5.20 U16934E

Caution The related documents listed above are subject to change without notice. Be sure to use the latest

Version of each document for designing, etc.

User’s Manual U17534EJ1V0UM00

General Precautions for Handling This Product

1. Circumstances not covered by product guarantee

・If the product was disassembled, altered, or repaired by the customer

・If it was dropped, broken, or given another strong shock

・Use at overvoltage, use outside guaranteed temperature range, storing outside

guaranteed temperature range

・If power was turned on while the AC adapter, USB interface cable, or connection to

the target system was in an unsatisfactory state

・If the cable of the AC adapter, the USB interface cable, the emulation probe, or the

like was bent or pulled excessively

・If an AC adapter other than the supplied product was used

・If the product got wet

2. Safety precautions

・If used for a long time, the product may become hot (50°C to 60°C). Be careful of

low temperature burns and other dangers due to the product becoming hot.

・Be careful of electrical shock. There is a danger of electrical shock if the product is

used as described above in 1Circumstances not covered by product guarantee.

User’s Manual U17534EJ1V0UM00 7

CONTENTS

CHAPTER 1 GENERAL...................................................................................................................................10

1.1 Hardware Specifications..................................................................................................................... 11

1.2 System Specifications ........................................................................................................................ 12

1.3 System Configuration ......................................................................................................................... 13

1.3.1 AC adapter .........................................................................................................................................16

1.4 Package Contents .............................................................................................................................. 17

CHAPTER 2 SETUP PROCEDURE....................................................................................................19

2.1 Names and Functions of Hardware.................................................................................................... 19

2.1 Names and Functions of Hardware.................................................................................................... 20

2.2 Removal of Acrylic Board ................................................................................................................... 22

2.3 Clock Settings .................................................................................................................................... 22

2.3.1 Overview of clock settings..................................................................................................................22

2.3.2 Clock setting methods ........................................................................................................................23

2.3.3 Main system clock..............................................................................................................................23

2.3.4 Subsystem clock ................................................................................................................................27

2.4 Software Settings ............................................................................................................................... 28

2.5 Mounting and Connecting Connectors ............................................................................................... 29

2.5.1 Mounting NQ in target system............................................................................................................29

2.5.2 Mounting YQ on NQ ...........................................................................................................................29

2.5.3 Plugging EA into YQ...........................................................................................................................30

2.5.4 Precautions for handling NQ, YQ, YS ................................................................................................30

2.5.5 Precautions on mounting NQ and IC..................................................................................................31

2.6 Connection of QB-78K0FX1 to Target System................................................................................... 31

2.7 Power Supply and GND Pin Connection Precautions ........................................................................ 35

2.8 Connection of USB Interface Cable and AC Adapter ......................................................................... 35

2.9 Switching Power On and Off .............................................................................................................. 35

CHAPTER 3 SETTINGS AT PRODUCT SHIPMENT ....................................................................36

CHAPTER 4 DIFFERENCES BETWEEN TARGET INTERFACE CIRCUIT AND TARGET

DEVICE........................................................................................................................................................37

4.1 For 78K0FC1+ Emulation................................................................................................................... 38

4.2 For 78K0/FE1+ Emulation.................................................................................................................. 40

4.3 For 78K0/FF1+ Emulation .................................................................................................................. 42

CHAPTER 5 CAUTIONS......................................................................................................................44

CHAPTER 6 RESTRICTIONS..............................................................................................................44

APPENDIX A NOTES ON TARGET SYSTEM DESIGN ...........................................................45

APPENDIX B PACKAGE DRAWINGS..............................................................................................48

User’s Manual U17534EJ1V0UM00

B.1 Target Connectors.............................................................................................................................. 48

B.2 Exchange Adapters............................................................................................................................ 53

B.3 YQ Connectors................................................................................................................................... 55

B.4 Mount Adapters.................................................................................................................................. 57

B.5 Check Pin Adapter ............................................................................................................................. 59

B.6 Spacer Adapters ................................................................................................................................ 60

B.7 Emulation Probe................................................................................................................................. 62

B.8 Clock Board........................................................................................................................................ 63

User’s Manual U17534EJ1V0UM00 9

CHAPTER 1 GENERAL

The QB-78K0FX1 is an in-circuit emulator for emulating the 78K0/Fx1+.

Hardware and software can be debugged efficiently in the development of systems in which the 78K0/Fx1+ is used.

This manual descries basic setup procedures, hardware specifications, system specifications, and how to set switches.



User’s Manual U17534EJ1V0UM00

Tabla de contenidos

Otros manuales de Microcontrolador de Renesas

Renesas

Renesas RL78/G13 Manual de usuario

Renesas

Renesas RL78/G1A Manual de usuario

Renesas

Renesas RX Series Manual de usuario

Renesas

Renesas Synergy DK-S7G2 Manual de usuario

Renesas

Renesas RX65N Series Manual de usuario

Renesas

Renesas G1X RL78G13 Series Manual de usuario

Renesas

Renesas RA Series Manual de usuario

Renesas

Renesas M16C-Flasher Manual de usuario

Renesas

Renesas RL78/G1P Instrucciones de uso

Renesas

Renesas V850ES/F 3-L Series Manual de usuario

Renesas

Renesas HD6473937RXV Manual de usuario

Renesas

Renesas mPD179327 Subseries Manual de usuario

Renesas

Renesas M306H5T3-RPD-E Manual de usuario

Renesas

Renesas DK-S128 Manual de usuario

Renesas

Renesas RSKRL78G14 Guía de inicio rápido

Renesas

Renesas V850/SA1 Manual de usuario

Renesas

Renesas RL78/I1A Manual de usuario

Renesas

Renesas R7F0C80112ESP Manual de usuario

Renesas

Renesas EK-RA2E2 Manual de usuario

Renesas

Renesas RL78/G11 Manual de usuario

Renesas

Renesas RSK Series Manual de usuario

Renesas

Renesas RH850 Series Manual de usuario

Renesas

Renesas RA6 Series Manual de usuario

Renesas

Renesas RA Series Manual de usuario

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Texas Instruments

Texas Instruments Chipcon CC2420DK Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario