REED K4010 Manual de usuario
reedinstruments
www com
Model K4010
Photo-Contact
Tachometer
Instruction
Manual
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
1.888.610.7664info@REED-Direct.com REED-Direct.com
reedinstruments
www com
2
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Table of Contents
Features......................................................................................... 2
Specications................................................................................ 3
Instrument Description .................................................................. 4
Operating Procedures ................................................................4-5
Photo Tachometer Measurement ................................................ 4
Contact RPM Measurement........................................................ 5
Contact Surface Speed Measurement ........................................ 5
Memory Call Button Operation.................................................... 5
Battery Replacement..................................................................... 6
Features
• Automatically holds last reading for 5 minutes and recalls minimum
and maximum readings
• Characters on the 5-digit display reverse direction depending on
which measurement mode you are in
• Microcomputer LSI circuitry provides accuracy to 0.05% and permits
readings to a resolution of 0.1 RPM in either photo or contact mode
• ABS plastic housing assures years of maintenance free performance
• Designed to t comfortably in either hand
For service on this or any other REED product or information on other
1.888.610.7664info@REED-Direct.com REED-Direct.com
reedinstruments
www com
3
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Specifications
Range: Photo: 5 to 99,999 tr/min;
Contact: 0.5 to 20,000 tr/min;
Surface Speed: 0.05 to 1,999.9 mpmin/
0.2 to 6,560 fpm
Resolution: 0.1rpm < 999.9 tr/min, 1 rpm > 1000rpm;
0.1 mpm < 99.99 mpm;
0.1 fpm < 99.99 fpm, 1 fpm >1000 fpm
Accuracy: ±(0.5% + 1 digit)
Sampling Time: Photo: 1 sec. > 6 rpm;
Contact: 1 sec. > 60 tr/min
Detecting Distance: 50 to 150 mm (2” to 6”) typically;
300 mm (12”) max.
Operating temperature: 0 - 50°C (32 - 122°F)
Display: 5 digit LCD 10 mm high
Power Supply: (4) 1.5V L “AA” batteries
Dimensions: 215 x 65 x 38 mm
(8.5 x 2.6 x 1.5”)
Weight: 10.6 oz (300g)
Includes: 3 contact adapters (2 cones, 1 funnel),
surface speed wheel, reective tape,
batteries and hard carrying case
Optional accessories: Replacement Measuring Wheel (AS-35C)
Replacement Cone Tip (CONE)
Replacement Funnel Tip (FUNNEL)
Replacement extension Shaft (EXT-SHAFT)
Reective Tape (RT100)
1.888.610.7664info@REED-Direct.com REED-Direct.com
reedinstruments
www com
4
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Instrument Description
1. Reective mark
2. Signal light beam
3. Monitor indicator
4. Display
5. Measure button
6. Memory call button
7. Function select switch
8. Rotating ring
9. Circumferential speed ring
10. Battery Compartment
Operating Procedures
Photo Tachometer Measurement
1. Slide the Function switch to the RPM (Photo) position
2. Place the reective marking (tape) to the object being measured
3. Press the Measure button and align the visible light beam with the
reective mark
4. Ensure that the Monitor indicator lights when the target passes
through the light beam
5. Release the Measure button when the reading stabilizes
(about 2 seconds)
In order to obtain greater accuracy for measurement of less than 50 RPM,
use 2 or 3 pieces of reective tape and then divide the reading with the
number of pieces used to calculate the nal gure.
1.888.610.7664info@REED-Direct.com REED-Direct.com
reedinstruments
www com
5
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Contact RPM Measurement
1. Slide the Function switch to RPM (Contact) position
2. Press the Measure button while lightly pressing the rotating
device
3. Release the Measure button when the reading stabilizes (approx.
2 seconds)
Contact Surface Speed Measurement
1. Slide the Function switch to m/min. (Surface Speed) or ft/min.
(Surface Speed)
2. Press the Measure button and simply attach the surface speed
test wheel to the detector
3. Release the Measure button when the reading stabilizes
Memory Call Button Operation
The minimum, maximum and the last (nal) readings are automatically
stored during measurement. These values can be recalled anytime by
pressing the Memory Call buttonTo recall the stored value, follow these
procedures:
1. Press the Memory Call button once to display the last reading.
The symbol “LA” will appear on the display.
2. Press the Memory Call button once again to display the
maximum value. The symbol “UP” will appear on the display.
3. Press the Memory Call button once more to display the minimum
value. The symbol “DN” will appear on the display.
Max Value
Last Value
Min Value
Display
reading
Measuring Time
1.888.610.7664info@REED-Direct.com REED-Direct.com
Tabla de contenidos
Otros manuales de Instrumento de medición de REED
REED
REED LM-81LX Manual de usuario
REED
REED GU-3001 Manual de usuario
REED
REED R7140 Manual
REED
REED R8004 Manual de usuario
REED
REED MS2301 Manual de usuario
REED
REED R6010 Manual de usuario
REED
REED LM-8000 Manual de usuario
REED
REED R5060 Manual de usuario
REED
REED SL-4012 Manual de usuario
REED
REED R5020 Manual de usuario
REED
REED R7700 Manual de usuario
REED
REED R8150 Manual de usuario
REED
REED R7400 Manual de usuario
REED
REED ST-3347 Manual de usuario
REED
REED C-322 Manual de usuario
REED
REED CP-09 Manual de usuario
REED
REED 5A Manual de usuario
REED
REED SD-4023 Manual de usuario
REED
REED R5800 Manual de usuario
REED
REED SD-2010 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario