Redexim POWER BOX RAKE 1500 Manual de usuario

User manual

POWER BOX RAKE 1500

Translation of the original user manual

2139 English 952.120.019 EN

Kwekerijweg 8 | 3709JA | Zeist | The Netherlands |

T: +31 (0)306 933 227

E: redexim@redexim.com

W: www.redexim.com

Redexim

EU DECLARATION

We –Redexim BV, Utrechtseweg 127, 3702 AC Zeist, Holland –declare entirely under our own

responsibility that the product:

POWER BOX RAKE WITH A MACHINE NUMBER AS INDICATED ON THE MACHINE AND

INDICATED IN THIS MANUAL

to which this declaration refers, complies with stipulation of the 2006/42/EC machine directive and with

the norms NEN-EN-ISO 12100:2010, NEN-EN-ISO 13857:2008, NEN-EN-ISO 4254-1:2013, NEN-EN-

ISO 4254-5:2018.

Zeist, 18.03.2020

A.C. Bos

Manager Operations & Logistics

Redexim Holland

Redexim

FOREWORD

Congratulation on your Power Box Rake purchase. For safe and long-lasting operation of this Power

Box Rake, it is necessary to read and to understand this user manual. It is impossible to work safely

with this machine without complete knowledge of the content of the user manual.

The Power Box Rake is not a machine that works independently. It is the user’s responsibility to use

the correct shovel or other towing vehicle. The user must also check the towing vehicle/Power Box

Rake combination on safety aspects such as noise level, user instructions and risk analysis.

The following pages deal initially with the general safety instructions. Every user should know these

safety instructions and apply them. At the end of this page, a registration card is inserted. This

registration card should be returned to enable us to deal with potential future claims.

All information and technical specifications provided at the moment that this document is published are

the most recent ones. Design specifications may be changed without prior notice.

This document is a translation of the original operating instructions.

Upon request, the original operating instructions are available in Dutch.

WARRANTY CONDITIONS

WITH DELIVERY THIS REDEXIM MACHINE IS GUARANTEED AGAINST MATERIAL DEFECTS.

THIS WARRANTY IS VALID FOR A PERIOD OF 12 MONTHS FROM THE PURCHASE DATE.

REDEXIM WARRANTIES ARE SUBJECT TO THE ‘GENERAL CONDITIONS FOR SUPPLY OF

PLANT AND MACHINERY FOR EXPORT, NUMBER 188’ THAT ARE PUBLISHED UNDER THE

AUSPICES OF THE UNITED NATIONS ECONOMIC COMMISSION FOR EUROPE.

REGISTRATION CARD

For your own information, fill in the table below:

Serial number of the machine

Dealer name

Date of purchase

Remarks

Redexim 
 
 

TABLE OF CONTENTS 
 
SAFETY INSTRUCTIONS............................................................................... 5 
1. Obligations of the user........................................................................... 5 
2. Maintenance, repairs and adjustments.................................................. 6 
3. Using the machine................................................................................. 6 
TECHNICAL DATA ......................................................................................... 7 
GENERAL DESCRIPTION.............................................................................. 7 
SAFETY STICKERS........................................................................................ 8 
FIRST INSTALLATION ................................................................................... 9 
ATTACHING AND DETACHING THE MACHINE..........................................10 
1. Attaching the machine......................................................................... 10 
2. Detaching the machine........................................................................ 11 
SAFETY WHEN USING THE POWER BOX RAKE.......................................11 
PROCEDURES...............................................................................................11 
1. Starting to cultivate.............................................................................. 12 
2. Starting to cultivate.............................................................................. 13 
3. Starting to cultivate.............................................................................. 14 
TRANSPORT..................................................................................................15 
MAINTENANCE .............................................................................................16 
1. Tightening torques............................................................................... 16 
2. Tightening torques............................................................................... 17 
TROUBLE SHOOTING (PROBLEM ANALYSIS) ..........................................18 
CHAIN TENSION............................................................................................19 
 
 
 

Redexim

1. SAFETY INSTRUCTIONS

This machine is designed for safe use. This can only be achieved if you completely follow the safety

instructions described in this manual.

Read and understand the manual before you start using this machine.

If the machine is not used as described in this manual, this can result in injuries and/or damage to the

machine.

This user manual lists instructions that are numbered in sequence. You should follow this sequence. A

is an indication of a safety instruction. A means a tip and/or note.

1.1. Obligations of the user

Treating fields/lawns is the only purpose of the machine. Any other use is improper. The manufacturer

will not accept any liability for damage resulting from improper use. All risks occurring with this are

entirely at the expense of the user.

All persons assigned to operate, maintain and repair the machine by the owner must completely read

and understand the operation manual and in particular the chapter of Safety Instructions.

Modifications to the machine that have a negative impact on the safety must be rectified immediately.

The user is obliged to check the machine for visible damage and defects before using the machine.

For safety reasons it is not permitted to make changes or adjustments to the machine (except those

approved by the manufacturer). If modifications to the machine have been made, then the current CE

marking is cancelled. The person that has made these modifications has to apply for a new CE

marking himself.

Following the use, maintenance and repair instructions prescribed by the manufacturer is also

considered proper use of this machine.

The user is responsible for the safe combination of the machine and the towing vehicle, which comply

with the requirements as described in the Technical Data (see Chapter 2). This entire combination

should be tested for noise, safety, risk and user friendliness. User instructions should also be drafted.

Dress appropriately during work activities with the machine. Wear sturdy shoes with steel

toecaps, long trousers and tie up long hair. Do not wear loose clothing.

The general applicable health & safety (Dutch: ARBO) regulations must also be followed in addition to

the instructions in this user manual.

Relevant traffic regulations also apply in case of using public roads.

Redexim

1.2. Maintenance, repairs and adjustments

Keep a record of the repair activities.

When unskilled people use, maintain or repair the machine, this could result in injuries to the user and

to third parties. This should be avoided!

Use only original Redexim parts for maintenance or repairs because of the safety of the machine and

of the user.

Only authorised technical personnel may carry out repairs to the machine.

When carrying out maintenance, adjustments and repairs, it is necessary to block the machine in

order to prevent it from sinking away, driving off and/or sliding off.

If a hydraulic installation is present, you should always make it pressure-free before working on this

installation.

Used oil/grease is harmful to the environment. Dispose of these substances according to the

regulations that apply in your location.

1.3. Using the machine

Attach the machine to the towing vehicle according to the regulations. Pay close attention to the risk of

injury!

Never use the machine in the absence of protective guards and safety stickers.

Check the machine for loose bolts, nuts and components before every operation.

Check whether you have a clear field of vision –both close by and far away –before you start moving.

All persons that are going to operate the machine must be familiar with all the functions and control

elements of the machine before starting any work activities.

Never crawl under the machine! If necessary, tip over the machine to work at the bottom side.

If present, check the hydraulic hoses regularly and replace these when the hydraulic hoses are

damaged or appear old.

Redexim

2. TECHNICAL DATA

3. GENERAL DESCRIPTION

The Power Box Rake is designed to carry out various tasks, including cultivating, raking,

levelling and earth-moving.

A heavy rotor with special carbide teeth is mounted on it. The rotor is hydraulically propelled

and can rotate in both directions. The rotor can be adjusted to the left and to the right in order

to move rocks, etcetera to the side. The abridged operation of the various functions is:

-Cultivating

The rotor can be lowered into the ground and grind the soil. The side plates are used

to keep the soil in the machine, to sweep the waste in front of the machine and to

keep the treated soil clean.

-Raking

Rocks / stones can be raked to the side(s) by adjusting the working depth in such a

manner that the rotor teeth just touch the ground and by adjusting the rotor to the

side(s).

-Levelling

You can level the ground accurately by adjusting the machine in such a manner that

the rotor teeth touch the high points in the field and move the soil to lower lying parts

of the field.

Type

Power Box Rake 1500

Recomended voertuig

Minimum 30 Hp with a minimum lift capicity 610mm behind

lifting eyes of 425 Kg (935 lbs)

Working width

1.5 mtr (59”)

Working depth

50 - 100mm (2” –4”)

Drive speed

Maximum 12 Km/h (7.5 mph)

Tyre pressure

1-2 bar

Weight

365 kg (803 lbs)

Dimensions (LxBxH)

1.44 x 1.75 x 1.19 mtr

(56.9” x 68.8” x 46.6”)

3 point system

Cat. 1-2

Grease for bearings

EP 2

Standard components

-Fixing leg

-Adjustable side-screens

-Adjustable set of wheels

-Rotatable 3 point frame

Redexim

4. SAFETY STICKERS

Safety stickers are located on both sides of the machine. These safety stickers must always be clearly

visible and legible and must be replaced if they have become damaged.

933.280.402

-In case of maintenance, adjustments and repair, always

switch OFF the engine of the towing vehicle.

-Keep a distance of minimum 4 metres if the machine is

operating (except the operator).

900.280.402

-Prior to using the machine, the operators of the machine

must read the user manual carefully.

Redexim

5. FIRST INSTALLATION

The machine should be prepared for use as follows (Figure 1):

1. Attach cables to the hoisting point (1).

Ensure that the crane and hoisting cable can handle at least the following weights:

POWER BOX RAKE 1500 650 kg (1430 lbs)

2. Remove the wheels (2) from the pallet and mount these at the back of the machine in

the square beams.

3. Lower the front leg (3) and secure this with the clip

4. Lift the machine including the pallet approx. 10 cm (4”) off the ground.

5. Loosen the pallet by removing the 3-point pins (4) at the bottom.

6. Pull the pallet from under the machine.

7. Carefully lower the machine until it stands safely on the ground.

!! KEEP A SAFE DISTANCE. THE MACHINE MAY START TO SLIDE DURING HOISTING !!

!! NEVER CRAWL UNDER THE MACHINE !!

Figure 1

Redexim

6. ATTACHING AND DETACHING THE MACHINE

Attaching and detaching the machine has to be done carefully. Follow the instructions below:

Figure 2

6.1. Attaching the machine

Prior to attaching the machine, check the following points:

-Check whether the machine is undamaged and whether it is safe to attach and use

the machine.

-Check for loose bolts and nut, if so tighten these.

-Check whether all safety stickers are on the machine and whether these are

undamaged and easily readable. Never use the machine if it has damaged or

unreadable stickers.

The machine should be attached to the tractor in the following manner:

1. Remove the 3-point pins (1) at the top from the machine (see Figure 2).

2. Carefully drive the tractor backwards until the lifting arms (2) can be attached to the

machine.

!! Make sure that the tractor and the machine cannot move while you are attaching

them !!

!! Switch off the tractor engine before attaching the machine !!

3. Attach the lifting arms (2) to the machine using the 3-point pins (3). Lock the pins

using the R-clips.

4. Set the stabilizer to a sideways stroke of 100 mm.

5. Mount the top rod (4) onto the tractor and attach it to the machine.

Tabla de contenidos

Otros manuales de Maquinaria agrícola de Redexim

Redexim

Redexim Verti-Groom 2000 Manual de usuario

Redexim

Redexim Core Collector 1200 Manual de usuario

Redexim

Redexim Verti-Drain 7110 Manual de usuario

Redexim

Redexim Easy Spread 1300 Manual del producto

Redexim

Redexim OVERSEEDER 3D Series Manual de usuario

Redexim

Redexim VERTI-DRAIN 7215 Manual de usuario

Redexim

Redexim 2227 Manual de usuario

Redexim

Redexim Verti-Air Manual de usuario

Redexim

Redexim VERTI-CUT 2000 Manual de usuario

Redexim

Redexim RINK DS1600 Manual de usuario

Redexim

Redexim 1400 Manual de usuario

Redexim

Redexim VERTI-DRAIN 7626 Manual de usuario

Redexim

Redexim DS800 Manual de usuario

Redexim

Redexim MULTIVATOR 1800 Manual de usuario

Redexim

Redexim RTC Manual de usuario

Redexim

Redexim Verti-Knife 1600 Manual de usuario

Redexim

Redexim Easy Spread 1300 Manual de usuario

Redexim

Redexim 1275 Manual de usuario

Redexim

Redexim Easy Spread 1500 Manual del producto

Redexim

Redexim Verti-Brush 1500 Guía

Redexim

Redexim Level-Spike 1700 Manual del producto

Redexim

Redexim Verti-Drain 2216 Manual de usuario

Redexim

Redexim Rapidcore 1600 Manual del producto

Redexim

Redexim POWER BOX RAKE 150 Manual de usuario

Manuales populares de Maquinaria agrícola de otras marcas

GSi

GSi PNEG-2314 Manual de usuario

Checchi & Magli

Checchi & Magli TEXDRIVE Manual de usuario

Amazone

Amazone Cenius 4003-2TX Manual de usuario

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manual de usuario

Cima

Cima BLITZ Instrucciones de funcionamiento y mantenimiento

Amazone

Amazone CombiDisc 3000 Instrucciones de instalación

HE-VA

HE-VA Disc-Roller XL Contour Manual de usuario

AGT

AGT AGT-SSFM Manual de usuario

Milestone

Milestone 72-84 Manual de usuario

KUHN

KUHN Hector 3000 Manual de usuario

Krone

Krone X-Disc 6200 Manual de usuario

Eliet

Eliet DZC450 Manual de usuario

Taarup

Taarup BIO+ B4000 Manual de usuario

Garland

Garland SHAKER 310 DPG Manual de usuario

stable comfort

stable comfort StableWall System Manual de usuario

Raven

Raven AccuBoom Manual de usuario

International

International 710 Manual de usuario

Ashland

Ashland HDW-3217-14 Manual de usuario