Raidon InTANK iR2023 Manual de usuario
InTANK
iR2023
User Manual
» InTANK iR2023 User Manual ............................. 1
1. Package Contents and Product Views ..............................1
2. Operation Information........................................................2
3. Hardware Requirements and Precautions ........................3
4. Hardware Installation Procedure .......................................3
5. RAID Mode Setting............................................................4
6. Computer Setup ................................................................5
7. Hard Disk Status on LCD Screen......................................6
8. Data Rebuilding Operation ................................................7
9. GUI Monitoring Software and Firmware Update ...............8
10. Questions & Answers ......................................................10
» InTANK iR2023 產品使用說明 ........................... 12
1. 產品外觀及包裝內容 ..........................................................12
2. 環境需求 ............................................................................13
3. 硬體需求與注意事項 ..........................................................14
4. 硬體安裝 ............................................................................14
5. 設定 RAID 層級..................................................................15
6. 電腦設定 ............................................................................16
7. 訊息顯示 ............................................................................17
8. 資料重建功能說明..............................................................18
9. GUI 功能說明與韌體更新...................................................19
10. 常見問題 ..........................................................................21
iR2023 User Manual
V1.0
iR2023 User Manual
1
1. Package Contents and Product Views
Introduction
Thank you for purchasing RAIDON products. This User Manual will introduce you the InTANK iR2023
storage product. Before using your iR2023, please read it thoroughly. Although all information
contented in this User Manual had already been carefully veried before publishing, however, the
actual product and its specication will be based upon the time of delivery from RAIDON. Any update
to the product or its relevant information may be listed on www.raidon.com.tw . Product is subjected
to change without prior notications.
If you have any question regarding to the product you purchased, or you would like to know the
latest product information, User Manual’s update, please contact to your local supplier or visit to
www.raidon.com.tw for further information.
Copyright © Raidon Technology, Inc. – All right is reserved.
Open the package and you should nd the following parts:
iR2023
iR2023 x1 ( with removable drive tray enclosed x3)
SATA Cable x1
Screws & Keys
Quick Installation Guide x1
• Please check the product and accessories for any defect or missing parts. If you have any questions,
please contact your product supplier.
• Please visit the ofcial website (www.raidon.com.tw) to download drivers and other related resources.
iR2023 User Manual
2
Product View, Front and Back
LED Indicators：
10
1. LCD Display
2. UP/DOWN Buttons
3. ESC Button
4. Enter Button
5. Mute Button
6. Power Failure Indicator
1. Cooling Fan
2. 3-pin Fan Connector
3. RS232 Connector
4. 7-pin SATA Connector (Standalone HDD)
5. 15-pin Power Connector
6. 7-pin SATA Connector (RAID HDD)
Status Standalone HDD RAID HDD System Indication Buzzer
No HDD N/A Red light always on Purple light always on ON
HDD Idle Blue light always on Blue light always on Blue light always on N/A
Access Blue light ashing Purple light ashing Blue light always on N/A
Rebuilding-Source Blue light always on Blue light always on Blue light always on N/A
Rebuilding-Target Blue light always on Red light ashing Blue light always on N/A
Fan Failure Blue light always on Blue light always on Purple light always on ON
7. HDD Tray Handle
8. HDD Tray Ejection
9. HDD tray key lock
10. HDD Access Indicator
2. Operation Information
Operating Temperature : 0～40 ℃(32 ～104 ℉)
Storage Temperature : -10 ~ 70 oC (14 ~ 158 oF)
Line Voltage : 5V DC
Standalone HDD
Pri HDD
Sec HDD
iR2023 User Manual
3
After unlocking the HDD tray key lock with the key attached to the accessory, push the
HDD tray ejection to the right and the removable drive tray will pop open to remove the
removable tray.
Install the 2.5-inch hard disk and secure it with
the small screws included in the 4 parts package.
When the hard drive installation has been
completed, insert the hard drive tray into the
system horizontally and secure the latch into
place.
Install device into one of the CD-ROM bays
with screws from the accessory kit. Then
properly connect SATA cable and DC cable
from your system to the device.
3. Hardware Requirements and Precautions
1. Computers or servers must be with SATA I, SATA II, or SATA III interface.
2. Hard drive must be with SATA I, SATA II, or SATA III interface.
3. The independent drive at the top cannot be set into RAID mode with primary or secondary drive.
It is an independent drive.
4. You are strongly advised to set the storage mode before using your iR2023. (The default setting is
the RAID 1.)
5. Once the drive mode conguration has been completed, re-conguration using the same hard
drives to set the drive mode will result in complete data loss. If you must change the drive mode,
make sure to backup all data prior to the mode change.
6. A reboot is required after adding or changing RAID mode to ensure that the update is completed
to the new RAID mode.
7. iR2023 product allows user to simultaneously use the two different hard drives from two different
manufactures. However, if the user expects a better efciency, we strongly recommend the user
to use the two hard drives from the same manufacturer.
8. Please make sure that the two hard drives are free from bad blocks or defects prior to installation
in order to avoid system crashes or data loss.
9. The actual storage capacity of iR2023 recognized by the system may differ from the total capacity
stated on the hard drives combined once the drives have been formatted.
10.It is highly recommended for user to back up important data contained within the iR2023 unit on
a regular basis or whenever the user feels necessary to a remote or a separate storage device.
RAIDON will not be responsible for any lost of data caused during the use of the unit or the
recovery of the data lost.
4. Hardware Installation Procedure
Please follow the instructions below to complete the hardware installation.
Step 1
Step 2
Step 3
Step 4
Lock Unlock
iR2023 User Manual
4
5. RAID Mode Setting
After placing your two hard disks, turn on power and press UP Button, you are with the RAID Setting
mode. (Since the default setting is RAID 1 mode by factory, you do not have to reset RAID if you
want to use your iR2023 with RAID 1 mode.)
1. RAID 1 mode
1). Place two new hard drives into iR2023.
We would strongly suggest you to use two identical hard drives to get the maximum memory
capacity. And if the capacities of your two hard drives are difference, iR2023 only recognizes
the memory capacity at the small capacity hard drive.
2). Under RAID 1 mode, two hard drives will have the identical information as one from its mirroring
feature, therefore, even though one and only one of the two hard drives failed, iR2023 will
still work ne and properly. Once you replace the failed hard disk with a new one, iR2023 will
automatically do rebuilding the data from the good one to the new hard disk.
RS232 Port and RS232 Cable: Provides hardware status monitoring to industrial control system or IPC via
SATA
SATA
SATA Cable
SATA Power Cable
Internal host shell schematic
1
2
iR2023
iR2023
Power on your system after hardware installation is completed, and your operating system
will automatically detect the hard drives from booting. Then follow the steps from your
operating system to partition and format the drives when necessary, device will be ready to
use once the format is completed.
Step 5
※ Note :
1. RS232 Port and RS232 Cable: Provides hardware status monitoring to industrial control system or IPC via RS232.
2. We do not recommend users to disassemble the device without proper instructions and authorization. The manufacture warranty
will not cover the damages caused by unauthorized disassembling.
3. To prevent the device from malfunction, please make sure the device is connected with a direct and dedicated power connection of
a stable power input.
4. RS232 Port: For industrial control system or IPC to monitor the hardware status. More information, please contact your sales
iR2023 User Manual
5
6. Computer Setup
When the hardware setup for iR2023 is complete, you are now ready to turn the machine on.
After the hardware installation is complete, the iR2023 will be treated as one single hard drive. When
the computer is turned on, the system will retrieve the following information.
1. Device Manager Utility of Window OS will automatically detect the hard drive(s).
2. You can choose to format the hard drive by using the Disk Management tool of the operating
system before using the iR2023.
At this point, the installation process is completely nished. The user can freely retrieve and save
data to iR2023 just like retrieving and saving data to a regular hard drive. If the user has any problem
during the operation, please refer to the Question & Answer (Q&A) section in Appendix.
2. RAID 0 mode
1). Place two new hard drives into iR2023.
We would strongly suggest you to use two identical hard drives to get the maximum memory
capacity. And if the capacities of your two hard drives are difference, iR2023 only recognizes
the memory capacity at the small capacity hard drive.
2). Under RAID 0 mode, the total memory capacity of iR2023 would be double from the small capacity
hard drive. And also, RAID 0 mode will perform an excellent efficiency from its high data
transfer rate for user to read & write data.
iR2023 User Manual
6
7. Hard Disk Status on LCD Screen
2. Over Heat (≥50°C)
Pri HDD : OK
Sec HDD : OK T
3. Fan Failure
Pri HDD : OK F
Sec HDD : OK
4. RAID 1 Degraded：Primary hard drive is failure, but secondary hard drive is normal.
RAID-1 degraded
Pri : M Sec : O
5. RAID 1 Failure：Primary and secondary hard drives are failure.
RAID-1 failure
Pri : M Sec : M
6. RAID 1 Failure：Double Source
RAID-1 failure
Double Source
7. RAID 0 Failure：Primary hard drive is missing, but secondary hard drive is normal.
RAID-0 failure
Pri : M Sec :O
8. Rebuilding
Rebuilding
Sec →Pri 32%
1. Booting and Normal status.
RAIDON RAIDbox2
RAID-1 vxxxxxx.x
Pri HDD : OK
Sec HDD : OK
iR2023 User Manual
7
The Hot Swappable hard drive and Auto Rebuilding features are available.
Off-line Back up：When the data is stored in iR2023, user can remove one of the hard drives as
back up drive for data such as system operation le, secured les, seldom modied les or image
and music les. The user can periodically insert the hard drive back into iR2023 to execute automatic
backup to protect the system from being hit by computer virus or to avoid the risk of having both hard
drives failing at the same time.
When one of the two hard drives fails in iR2023, it will issue an alert of a hard drive failure message
in both LCD display and the monitoring software. User can remove the failed hard drive from the
system while the system is still in operation without shutting down the machine. If the failed hard
drive is replaced shortly, the system will automatically execute the Auto Rebuilding function without
affecting the system operation and also any operation command from the user.
When the iR2023 detects one hard drive missing or failure, the Buzzer starts BEEPING and the LCD
displays the following messages：
After replacing a new hard disk with the failed one, LCD displays the following messages:
After few seconds from your inserting a new hard drive, LCD displays the data rebuilding progress：
When iR2023 completes its rebuilding, LCD again displays the following messages：
8. Data Rebuilding Operation
Pri HDD : OK
Sec HDD : OK
RAID-1 degraded
Pri : X Sec : O
Pri HDD : OK
Sec HDD : Insert
Rebuilding
Sec →Pri 32%
Pri HDD :Insert
Sec HDD : OK
Rebuilding
Pri →Sec 32%
iR2023 User Manual
8
Users can download the GUI software from the website to monitor the status of the product.
1. System Status:
This GUI automatically detects your iR2023 and reveals relative information accordingly.
2. Firmware Upfrade:
You may update the Firmware via this GUI, to just simply click on the “Load” button to locate the
rmware le to proceed. After completing the update, you may restart the power to work with the
new rmware.
※ Caution: Any random rmware update may cause the malfunction at your iR2023, We strongly recommend you not to change/upgrade
iR2023 rmware if still works properly.
9. GUI Monitoring Software and Firmware Update
Otros manuales para InTANK iR2023
1
Tabla de contenidos
Otros manuales de Almacenamiento de Raidon
Raidon
Raidon iR2774C-S3 Manual de usuario
Raidon
Raidon SafeTANK GT4670-TB3 Manual de usuario
Raidon
Raidon InTANK iR2023 Manual de usuario
Raidon
Raidon InTANK IR2025 Manual de usuario
Raidon
Raidon iR2777-S3 Manual de usuario
Raidon
Raidon iR8023 Manual de usuario
Raidon
Raidon InTANK iR2022 Manual de usuario
Raidon
Raidon GT8670-TB3 Manual de usuario
Raidon
Raidon InTANK iR2823 Instrucciones de funcionamiento originales
Raidon
Raidon InTANK iR2775-S3 Manual de usuario
Raidon
Raidon GT8670-TB3 Manual de usuario
Raidon
Raidon InTANK IR8624-S3 Manual de usuario
Raidon
Raidon SafeTANK GT2660-TB3 Manual de usuario
Raidon
Raidon iR8023 Manual de usuario
Raidon
Raidon SafeTANK GR3660-B3 Manual de usuario
Raidon
Raidon InTANK Series Manual de usuario
Raidon
Raidon SafeTANK GR3660-TB2 Manual de usuario
Raidon
Raidon InTANK iR2771-S3 Manual de usuario
Raidon
Raidon SafeTANK GR8680-TB3 Manual de usuario
Raidon
Raidon SafeTANK GR5640-SB3 Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario