Raidon InTANK SR2611-2S-S2R+ Manual de usuario

SR2611-2S-S2R+ (6G)

User Manual

InTANK

» InTANK SR2611-2S-S2R+ (6G) User Manual ..........................................1

» InTANK SR2611-2S-S2R+ (6G) 產品使用說明...................................... 12

SR2611-2S-S2R+ (6G)

V1.3

SR2611-2S-S2R+ (6G)

Table of Contents

1. Package Contents and Product Views

Introduction

Thank you for purchasing RAIDON products. This manual will introduce the SR2611-2S-S2R+

(Hereinafter referred to as SA2611+). Before using your SR2611+ , please read this manual

thoroughly. Although all information contained in this user manual has been carefully veried before

publishing, however, the actual product specification will be based on the time of delivery from

RAIDON. Any updates to the product specications or relevant information may be found on www.

raidon.com.tw. Products are subject to change without prior notications.

If you have any questions regarding the products of RAIDON, or you would like to know the latest

product information, user manual update, or rmware update, please contact your local supplier or

visit www.raidon.com.tw for further information.

Open the package and you should nd the following:

Please make sure that the contents listed above are not damaged or missing. If you should find

damages or missing contents, please contact your supplier immediately.

1. Package Contents and Product Views

2. Operating Information

3. Hardware Requirements and Precautions

4. Hardware Installation Procedure

5. Setting RAID Mode

6. Computer Set Up

7. Hard Disk status on LCD screen LCD

8. Data Rebuilding Operation

9. GUI Monitoring Software and Firmware Update GUI

10. Frequently Asked Questions

SR2611+

SR2611+ x 1 ( with removable drive tray enclosed x 2)

Internal RS232 Cable x 1

External RS232 Cable x 1

SATA Cable x 1

CD x 1

Accessories Kit bag x 1

Quick Installation Guide x 1

SR2611-2S-S2R+ (6G)

Product View

1. LCD Display

2. LED of Failure Alarm

3. LED of Pri HDD

1. Fan

2. RAID Mode

3. RS232 Port

2. Operating Information

Operating Temperature : 0 ~ 40 °C (32 ~ 104 °F)

Storage Temperature : -10 ~ 70 °C (14 ~ 158 °F)

Line Voltage : 5V DC

4. LED of Sec HDD

5. Mute Button

6. Key Lock

4. SATA Port

5. 15 PIN Power Connector

6. 4 Pin Big Power Connector

LED Indicators :

Status

LED

Buzzer

HDD Failure

Idle (No Drive) —— Red lights on Alarm

Idle Yellow lights on —— ——

Fan failed —— Red lights on Alarm

HDD failed —— Red lights on Alarm

Overheat —— Red lights on Alarm

Accessing Yellow lights on —— ——

Rebuilding-Source Yellow lights on —— ——

Rebuilding-Target —— —— ——

SR2611-2S-S2R+ (6G)

3. Hardware Requirements and Precautions

4. Hardware Installation Procedure

1. Computers or servers with SATA I & SATA II & SATA III.

2. Hard drive with SATA I & SATA II & SATA III

3. You are strongly advised to set the storage mode (the default is the Independent mode) before

using the SR2611+.

4. The product allows the user to simultaneously utilize two hard drives manufactured by different

companies. However, if the user expects better efciency, we strongly recommend the users to

use hard drives manufactured by the same manufacturer.

5. Please make sure that the two hard drives are free from bad blocks or defects prior to installation

in order to avoid system crashes or data loss.

6. The actual storage capacity of SR2611+ recognized by the system may differ from the total

capacity stated on the hard drives combined once the drives have been formatted.

7. It is highly recommended for users to back up important data contained within the SR2611+

unit on a regular basis or whenever the user feels necessary to a remote or a separate storage

device. Raidon will not be responsible for any lost of data caused during the use of the unit or the

recovery of the data lost.

Please follow the instructions below to complete the hardware installation.

Install your hard disks into the removable trays and secure them with the screws from

accessory kit. This will protect your hard disk from any unnecessary movement.

Step 1

Note :

Once the drive mode conguration has been completed, re-conguration using the same hard

drives to set the drive mode will result in complete data loss. If you must change the drive

mode, make sure to backup all data prior to the mode change.

Once the hard disks have been installed, insert the removable trays into device and close

the handles.

Install device into one of the CD-ROM bays with screws from the accessory kit. Then

properly connect SATA cable and DC cable from your system to the device.

Power on your system after hardware installation is completed, and your operating system

will automatically detect the hard drives from booting. Then follow the steps from your

operating system to partition and format the drives when necessary, device will be ready to

use once the format is completed.

Step 2

Step 3

Step 4

SR2611-2S-S2R+ (6G)

5. Setting RAID Mode

Please select the RAID mode with the jumper located at the back panel. The original default is RAID

1, still there are three pins at the back panel for RAID mode selection: RAID 0 mode by setting the

jumper on the bottom of the two pins. RAID 1 mode by setting the jumper on the top of the two pins.

1. RAID 1 Mode (default)

1). Insert two brand new hard drives into SR2611+.

2). As RAID 1 is composed of two hard drives, it can be referred to as disk mirroring, each data will

simultaneously be written in two hard drives and the data in two hard drives are exactly the

ame. Whenever one of the hard drives is failed, the system is still able to work normally. Once

the failed hard drive is replaced by a new one, SR2611+ will start auto-rebuilding.

The computing method of RAID 1 hard disk capacity:

[total capacity] = [minimum capacity of hard drive]

Ex:

2 × 500GB HDD=500GB

1 × 500GB HDD+1× 200GB HDD=200GB

RAID 0 Mode RAID 1 Mode

Internal Case

※ Note :

1. RS232 Port and RS232 Cable: Provides hardware status monitoring to industrial control system or IPC via RS232.

2. We do not recommend users to disassemble the device without proper instructions and authorization. The manufacture warranty

will not cover the damages caused by unauthorized disassembling.

3. To prevent the device from malfunction, please make sure the device is connected with a direct and dedicated power connection of

a stable power input.

SR2611-2S-S2R+ (6G)

6. Computer Set Up

When the hardware setup for SR2611+ is complete, you are now ready to turn the machine on.

After the hardware installation is complete, the SR2611+ will be treated as one single hard drive. Set

the hard drive to AUTO in the computer’s BIOS. When the computer is turned on, the system will

retrieve the following information:

1. In SR2611+, the installed hard drive can be detected by the Device Manager of Computer

Management for Windows.

2. Customers can choose to format the hard drive by using the Disk Management tool of the

operating system before using the SR2611+.

At this point, the installation process is completely nished. The user can freely retrieve and save

data to SR2611+ just like retrieving and saving data to a regular hard drive. If the user experiences

any abnormality during the operation, please refer to the trouble shooting Q&A section in Appendix.

2. RAID 0 Mode

1). Insert two brand new hard drives into SR2611+.

2). The RAID 0 combines two hard drives to work as a large hard drive which provides the efcient

read/write performance.

The computing method of RAID 0 hard disk capacity:

[total capacity] = [hard drive number] x [minimum capacity of hard drive]

Ex:

2 × 500GB HDD=2 × 500GB=1000GB

1 × 500GB HDD+1× 200GB HDD=2×200GB=400 GB

SR2611-2S-S2R+ (6G)

7. Hard Disk status on LCD screen

3. Fan Failure

Pri HDD : OK

Sec HDD : OK T

2. Over Temperature (≥50°C)

Pri HDD : OK F

Sec HDD : OK

4. RAID 1 Mode. Primary hard drive is failure, but secondary hard drive is normal.

RAID-1 degraded

Pri : X Sec : O

5. RAID 1 Failure. Primary and secondary hard drives are failure.

RAID-1 failure

Pri : X Sec : X

6. RAID 1 Failure (Double Source)

RAID-1 failure

Double Source

7. RAID 0 Failure. Primary or secondary hard drive is missing.

8. RAID 1 Failure. Primary hard drive is missing, but secondary hard drive is normal.

RAID-0 failure

Pri : M Sec : O

RAID-0 failure

Pri : O Sec : M

RAID-1 failure

Pri : M Sec :O

9. Rebuilding

Rebuilding

Sec →Pri 32%

1. Booting and Normal status

SR2611+

RAID-1 v150821.1

Pri HDD : OK

Sec HDD : OK

Sec to Pri

Rebuilding

Pri →Sec 32%

Pri to Sec

SR2611-2S-S2R+ (6G)

The hard drive Hot Swap and Auto Rebuilding functions are available.

Off-line Back up When the data is stored within SR2611+, the user can remove one of the hard

drives from SR2611+ as back up drive for data such as system operation le, secured les, seldom

modified files or image and music files. The user can periodically insert the hard drive back into

SR2611+ to execute automatic backup to protect the system from being hit by computer virus or to

avoid risk of having both hard drives failing at the same time.

When one of the two hard drives fails in the SR2611+ system, the system will alarm the hard drive

failure message both on the LCD display screen and in the monitoring software. The user can

remove the failed hard drive from the system while the system is still in operation without shutting

down the machine. If the failed hard drive is replaced shortly, the system will automatically execute

the Auto Rebuilding function without affecting the system operation and without any operation

command from the user.

When the SR2611+ detects a hard drive missing or a hard drive failure, the Buzzer will start and the

LCD display screen will display the following messages:

After removing the failed hard drive and replacing with a new hard drive, if the hard drive is properly

installed, the LCD display screen will display the following messages:

After few seconds of installing the new hard drive, the LCD display screen will display the data

rebuilding progress:

When the rebuilding is fully completed, the LCD display screen will again display the following

messages:

8. Data Rebuilding Operation

Pri HDD : OK

Sec HDD : OK T

RAID-1 degraded

Pri : X Sec : O

Pri HDD : OK

Sec HDD : Insert

Rebuilding

Sec →Pri 32%

Pri HDD :Insert

Sec HDD : OK

Rebuilding

Pri →Sec 32%

SR2611-2S-S2R+ (6G)

You can install GUI software to monitor the status of SR2611+. This can be done by installing

software from CD.

※ The HDD1 equals to Pri HDD and HDD2 equals to Sec HDD.

1. System Status

This GUI will auto detects the connected SR2611+ and reveals relative information accordingly.

2. Firmware Upgrade

You may update the Firmware via this GUI, simply click on “Load” button to locate the rmware

le to proceed. After update is nished, you may restart the power properly to operate with newly

updated rmware.

※ Caution : Any random rmware updates may cause device in malfunction, it is strongly suggested not to update device rmware if

device is operating properly.

9. GUI Monitoring Software and Firmware Update

Tabla de contenidos

Otros manuales de Almacenamiento de Raidon

Raidon

Raidon iT4300 Series Manual de usuario

Raidon

Raidon InTANK iR2023 Manual de usuario

Raidon

Raidon SafeTANK GT4670-TB3 Manual de usuario

Raidon

Raidon SafeTANK GR3660-B3 Manual de usuario

Raidon

Raidon SafeTANK GT1670 Series Manual de usuario

Raidon

Raidon iR2777-S3 Manual de usuario

Raidon

Raidon intank ir2622 Manual de usuario

Raidon

Raidon SafeTANK GT2660-TB3 Manual de usuario

Raidon

Raidon InTANK iR2771-S3 Manual de usuario

Raidon

Raidon GT8670-TB3 Manual de usuario

Raidon

Raidon SafeTANK GR5640-SB31+ Manual de usuario

Raidon

Raidon iR2774-S3 Manual de usuario

Raidon

Raidon InTANK iR2023 Manual de usuario

Raidon

Raidon SafeTANK GR5630-WSB3+ Manual de usuario

Raidon

Raidon InTANK iR2823 Instrucciones de funcionamiento originales

Raidon

Raidon SafeTANK GR3660-TB3 Manual de usuario

Raidon

Raidon SR6600 Series Manual de usuario

Raidon

Raidon iR8023 Manual de usuario

Raidon

Raidon SafeTANK GR5640 Manual de usuario

Raidon

Raidon InTANK iR2622S Manual de usuario

Raidon

Raidon InTANK iR2771-S3 Manual de usuario

Raidon

Raidon SafeTANK GR5640-SB3 Manual de usuario

Raidon

Raidon InTANK HyBrid RunneR iH1010-2S-S2 Manual de usuario

Raidon

Raidon iR2777-S3 Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario