Radio Shack 4 Manual de usuario

Radie /haeK

Model

Quick

fl:

•

Reference

Guide

ADivision oi Tandy Corporation

Contents

Start-Up ^

TRSDOS -'l|J

Commands and Utilities ^4

Error Messages ^

BASIC ^

Statements and Functions .

Control Keys ^

Operators ^

Edit Commands ^

Special Characters ^4

Error Messages ^u|

Internal Codes ^

Start-Up

Make sure all floppy disk drives are empty and all equip-

ment is off.

Turn on all peripheral equipment (such as aprinter),

except the hard disk.

2. Hard disk users: Turn on the primary hard disk drive.

3. Turn on the computer.

4. Insert asystem diskette into Drive and close the

drive door. TRSDOS displays its start-up message.

5. TRSDOS prompts you for the date. Enter it in the

mm/dd/yy format.

6. The following system prompt will appear on your

screen:

TRSDOS Ready

Now, you can type in aTRSDOS command.

7. To start BASIC, type:

BASIC (ENTER)

and you see the BASIC prompt:

Ready

represents avalue that you supply. Information within

brackets is optional.

Now, you can type in aBASIC command.

This Quick Reference Guide is divided into two sections:

TRSDOS and BASIC.

Information which is non-shaded (like this) pertains to:

•TRSDOS intermediate commands and utilities

•BASIC statements

Information which is shaded like this pertains to:

•TRSDOS advanced commands and utilities

•BASIC functions

Commands and Utilities

Those parts of the command line that you must enter are

hiahliqhted. Information that is upper-case should be

typed in exactly as is. Information that is lower-case

represents avalue that you supply. Information within

brackets is optional.

APPEND source [TO] destination [(ECHO.STRIP)]

Adds one disk file onto the end of another.

ATTRIB iile (USER ="password"OWNER ="password"

PROT =level, VIS.INV)

Changes the protection of afile. The /eve _can be

EXEC READ UPDATE, WRITE, RENAME, REMOVE,

or FULL. ,,..,.. „„

ATTRIB CUSTFILE/DATsi (USER= >

OWNER="BOSSMAN" ,PROT =READ tVIS)

ATTRIB [drive] (LOCK,UNLOCK,MPW ="password",

NAME ="disk name", PW =["password"])

Changes the protection of files on adrive n

ATTRIB -.1 (NAME="DATA" ,PW="SECRET .

MPW="BOSSMAN" )

AUTO [drive, ?;drive, =drive] [*] [command line]

Stores acommand line for automatic execution each

time TRSDOS starts up. (AUTO by itself deletes the

current AUTO command line.)

AUTO BASIC AUTO *D0 INIT/JCL.l

BACKUP [filel source drive [TO] destination drive

5MPW=1?assword",SYS,INV,MOD,QUERY =YES,OLD,

NEW, X, DATE ="date")]

Duplicates asystem or data diskette, (file can be a

partial name.)

BACKUP ;si

BACKUP (MOD. QUERY, MPW= "SECRET "

)

BOOT [(CLEAR)- (ENTER), 3D]

Resets the system.

BOOT

BUILD iile [(HEXAPPEND)] xocnnQ

Creates an input file for JCL, KSM, and other TRSDOS

commands.

BUILD MYPROGA/FI>(;0

BUILD DISPLAY/BLD (HEX)

CLICK/FLT

SET device [TO] CLICK/FLT

FILTER *KI device

Establishes the key-click filter.

COM/DVR

SET *CL [TO] COM/DVR

Prepares the Communications Line (*CL) for use.

COMM device[(XLATES =X'aabb',XLATER =X'aabb',

XON -X'cc', XOFF =X'cc', NULL =OFF)]

Lets two computers communicate via adevice.

CONV [ffie]:source drive [:destination drive] [(VIS,

INV, SYS, NEW, OLD, QUERY=NODIR)]

Converts files from aTRSDOS 1.3 (Model III) diskette

onto aTRSDOS Version 6formatted diskette, (file can

be apartial name.)

CONY :1 ;0 <0IS,Q=N0>

COPY source [TO] destination [(LRL =nnn,

CLONE =NO, ECHOX)]

Copies data from one file or device to another.

COPY TEST/DAT TO :1

COPY *KI TO *PR (ECHO)

CREATE file [(LRL =number, REC =number,

SIZE =number)]

Creates afile and reserves space on the disk for future

use.

CREATE INVENT/DAT (SIZE=20)

DATE [mmydd/yy]

Sets or displays the current date.

DATE 08/09/82 DATE

DEBUG [(ON, OFF)] [(EXT)]

Sets up the debug monitor for testing and debugging

machine-language programs.

DEBUG DEBUG (OFF)

DEVICE [(D =NQB =YES,S =NO,P =YES)]

Displays the current status of each drive and the

options in use.

DEVICE DEVICE (B=YES)

DIR [file] [: drive] [(ALL,INV,M0d,NON,PRT, SYS, DATE

DATE ="date',' SORT =NO)]

Lists the directory of adrive or file, (.file can be apartial

name.)

DIR :i DIR <DATE="10/01/81-")

DO [S, =,*] tile [((&label,parm =value)] [;]

Compiles and executes aDO file.

DO DRIUE/JCL DO =DRIUE/JCL

DUMP file (START =address, END =address,

TRA =address, ASCII, ETX =value)

Copies an area of memory to adisk file.

DUMP ROUTINE/CMD

<START=X'700Q' .END =X'8Q0Q ' .

TRA=X'7000')

FILTER device [USING] phantom device

Filters data to or from adevice, using afilter program.

FILTER *PR USING *DU

FORMAT :drive (ABS.NAME ="disk name",

MPW="password", SDEN.DDEN, CYL =number,

QUERY =NO)

Formats ablank or old disk for use.

FORMAT

FORMAT :1(NAME= "DATA3" .

MPW="SECRET"

)

FORMS [(DEFAULT, ADDLF.CHARS =number.FFHARD,

INDENT =number, LINES =number,

MARGIN =number, PAGE =number, QUERY, TAB,

XLATE=X'aabb')]

Sets up printer options.

FORMS (MARGIN=10.CHARS=80.INDENT=G)

FORMS/FLT

SET *PF [TO] FORMS/FLT

FILTER *PR *PF

Prepares the Printer Filter (*PF) for use.

FREE [: drive] [(PRT)]

Lists free space and number of files on each disk; if

drive is specified, displays space map of that disk.

FREE FREE :0 (PRT)

JOBLOG

ROUTE *JL [TO] file

ROUTE *JL [TO] device

Establishes the Joblog device (*JU, which sends

certain information to afile or device.

ROUTE *JL TO LISTER/JBL

ROUTE *JL TO *PR

KSM/FLT

SET device KSM/FLT [USING] file

[(ENTER =value)]

FILTER *KI device

SET *DU KSM/FLT USING ROUTINE/KSM

FILTER *KI *DU

LIB

Displays library commands.

LIB

LINK device 1[TO] device2

Links two logical devices, :

LINK #D0 *PR

LIST Me [(ASCII8,NUM,HEX, TAB =number, PRT,

LINE =number, REC =number, LRL =number)]

Lists contents of afile to the display or printer

LIST TESTFILE:0

LIST MONITOR/CMD (PRT)

LOAD [(X)] file

Loads aprogram file into memory.

LOAD STATUS/CMD

LOAD (X) PROGRAM/CIM

MEMDISK7DCT

SYSTEM (DRIVE =drive.DRIVER ="MEMDISK")

Adds to the system apseudo floppy drive which keeps

its files in memory.

SYSTEM (DRIUE=2»DRIUER="MEMDISK")

MEMORY [(CLEAR =value, HIGH =address,

LOW=address, ADD =address, WORD =word

BYTE =byte, GO =address)]

Reserves aportion of memory, sets or displays current

HIGHS and LOW$, modifies amemory address, or

jumps to aspecified memory location.

MEMORY

MEMORY <ADD =X'E100' ,WORD=X '3E0A '

)

PATCH file (patch commands)

,Changes the contents of adisk file.

PATCH MONITOR/CMD (X'E100'=C3 SB 00)

PATCH file! USING Iile2 [(YANK,REMOVE)]

Makes changes contained in file2 to filet

PATCH BACKUP/CMDsB USING SPECIAL/FIX

PURGE [file]:drive [(QUERY=NO,MPW ="password"

INVSYS, DATE ="date")]

Deletes files, (fife can be apartial name.)

PURGE :0 (MPW="SECRET")

PURGE /BAS:1 (Q=N)

REMOVE iile [file] ...

Deletes files from the directory.

REMOVE ALPHA/DAT :0 BREAKER/DAT :

REMOVE device [device] ...

Removes devices from the device table.

REMOVE *LU

RENAME filel [TO] file2

RENAME device 1[TO] device2

Changes the name of afile or device.

RENAME TEXT/DAT :0 TO OLD/DAT

RENAME *UD TO *TX

REPAIR :drive

Updates system information on disks which were

formatted under Model ITRSDOS.

REPAIR :1

RESET device

RESET me

Returns adevice to its original start-up condition.

Closes an open file.

RESET *PR RESET PRINTER/DAT

ROUTE device 1[TO] device2

ROUTE device [TO] file [(REWIND)]

ROUTE device (NIL)

Routes adevice to another device, to adisk file, or to

nothing (NIL).

ROUTE *PR *D0

ROUTE #PR TO PRINTER/DAT

[RUN] [(X)] file [(command text)]

Loads and executes aprogram, command text is

optional values the program may require.

RUN CONTROL/CMD CONTROL/CMD

SET device [TO] driver file [(parameters)]

Assigns adriver program to adevice, parameters are

optional values the driver program may require.

SET *SP TO SERIAL/DRV

SET phantom device [TO] filter file [USING]

[parameters]

Assigns afilter program to aphantom device.

parameters are optional values the filter program may

require.

SET #LC TO TRAP/FLT

SETCOM [(DEFAULT, BAUD -number, WORD -

number, STOP =number, PARITY -switch, QUERY,

BREAK=value.EVEN.ODD)]

Sets up RS-232C communications or display status.

SETCOM <BAUD=300 ,W0RD=8 ,STOP=i .

PARITY=OFF)

SETKI [(DEFAULT, RATE =number, WAIT= number

QUERY)]

Sets keyboard repeat values. (SETKI by itself displays

current values.)

SETKI <DELAY=15)

SPOOL [device] [TO] [file] (NO, MEM =number,

BANK =number, DISK =number, PAUSE

RESUME.CLEAR)

Establishes an output buffer for adevice.

SPOOL *PR TO TEXTFILE:0

<MEM=5»DISK=15> SPOOL *PR (NO)

SYSGEN [(switch)] [(DRIVE =drive)]

Stores current system options in afile (CONFIG/SYS)

on drive. If switch is NO, the configuration file is

removed.

SYSGEN (YES) (DRIVE=4) SYSGEN (NO)

SYSTEM (parameters)

Selects certain options of yourTRSDOS system. In

the following SYSTEM commands, switch is YES or

NO.

SYSTEM (ALIVEf switch])

Displays amoving character when task processor is

running.

SYSTEM (BLINK =siv/fcW

SYSTEM (BLINK --number)

SYSTEM (BLINK,[LARGE,SMALL])

Control the cursor character.

SYSTEM (BREAK[ switch])

Enables or disables BREAK key.

SYSTEM (DATE[ =switch])

Turns on or off the start-up date prompt.

SYSTEM (DRIVE =drive, [CYL =number,

DELAY=NO/YES, DISABLE, ENABLE,

DRIVER = "file", WP%yjw/fcn]3

Sets parameters for drive.

SYSTEM (SYSRES =number)

Adds TRSDOS system overlays into high memory

SYSTEM (SYSTEM

drive)

Assigns drive as system drive.

SYSTEM (TIME[ =siv/fch])

Turns on or off the start-up time prompt.

SYSTEM (TRACE[=sMch])

Displays contents of Program Counter.

SYSTEM (TYPE[ =switch])

Turns on or off the Kf/DVR type-ahead feature.

TAPE 100

TAPE100 filel [TO] Iile2 (READ.WRITE)

Reads aModel 100 cassette tape file and writes it to a

disk file, or reads adisk file and writes it to cassette

tape.

TAPE100 PRNTER TO PR INT/DAT :(READ)

TIME [hh:mm:ss] [(CLOCK =YES/NO)]

Sets the time or displays current time.

TIME TIME 12:23:34

VERIFY [(switch)]

Sets VERIFY function on or off.

VERIFY (YES) VERIFY (NO)

Otros manuales para 4

Tabla de contenidos

Otros manuales de De oficina de Radio Shack

Radio Shack

Radio Shack TRS-80 III Manual de usuario

Radio Shack

Radio Shack TRS-80 Manual del producto

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack 26-1061 Manual de usuario

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack TRS-8O Manual de usuario

Radio Shack

Radio Shack TRS-80 Manual de servicio

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack TRS-80 Model 100 Manual de usuario

Radio Shack

Radio Shack TRS-80 III Manual de usuario

Radio Shack

Radio Shack TRS-80 Model 4 Manual de referencia

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack System 80 Manual de usuario

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack TRS-80 Model 16 Manual de usuario

Radio Shack

Radio Shack TRS-80 Model 16 Manual de usuario

Radio Shack

Radio Shack TRS-80 Model 100 Guía del usuario

Radio Shack

Radio Shack TRS-80 Manual de usuario

Radio Shack

Radio Shack TRS-80 Model 16 Manual de usuario

Manuales populares de De oficina de otras marcas

HP m9060n - Pavilion - Elite Hoja de especificaciones

Asus

Asus E210 Series Manual de usuario

Dell

Dell Inspiron 600m Manual de usuario

Dell

Dell Inspiron 3662 Manual de usuario

TotalFlow

TotalFlow uFLO Manual de usuario

HP Presario SV7000 - Desktop PC Manual de usuario

HP ProDesk 400 G5 Manual

Logitech

Logitech MK320 Manual de usuario

Dell

Dell XPS 730 H2C Manual de usuario

Sony

Sony Vaio Series Manual de usuario

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manual de usuario

Alto

Alto MD 250 Manual de usuario

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series Manual de usuario

Sony

Sony VAIO VGX-TP1 Series Manual de usuario

Asus

Asus Eee Box B204 Manual de usuario

Dell

Dell Optiplex 9010 All In One Manual de usuario