RADEMACHER Troll Standard 5620 Manual de usuario
VBD 592-2 (01.21)
Item no. 3650 03 12 (ultra white) / 3650 03 22 (aluminium)
EN
Troll Standard
Instruction manual for the electrical connection and for commissioning
Type: 5620
2
EN
i
Contents
1. This manual..........................................................................................4
1.1 How to use this manual....................................................................4
2. Hazard symbols...................................................................................5
2.1 Levels of danger and signal words................................................5
2.2 Symbols and depictions used.........................................................6
3. Safety instructions..............................................................................7
3.1 Intended use.........................................................................................8
3.2 Improper use ........................................................................................8
3.3 Expert knowledge required by the installer..............................8
4. Included in delivery............................................................................9
5. General view of the operating unit................................................10
5.1 General view of the installation housing................................. 12
5.2 Electrical connections .................................................................... 13
5.3 Display and its symbols ................................................................. 14
6. Product description..........................................................................15
6.1 Description of the safety functions ........................................... 16
6.2 Overview of functions.................................................................... 16
7. Technical specifications ...................................................................18
7.1 Werkseinstellungen......................................................................... 20
7.2 Conduct in the event of a power failure .................................. 21
8. Safety instructions for the electrical connection ........................22
8.1 Important information prior to the electrical
connection and installation ......................................................... 24
8.2 Electrical connection ...................................................................... 25
9. Installation after the electrical connection ..................................27
10. Brief description of the standard display and main menu........28
11. Introduction to opening the menus and
setting the functions ........................................................................29
12. Initial commissioning with the help of the
installation wizard ............................................................................31
3
EN
Contents
i
13. Manual operation .............................................................................33
14. Memory function - accepting the current time
as switching time ..............................................................................34
15. Menu overview..................................................................................35
16. Menu 1 - Switching automatic mode on/off ................................36
17. Switching times (opening and closing times) [ / ],
brief description................................................................................37
17.1 Menu 2 - Configuring opening and closing times [ / ] .. 38
18. Menu 6 - Configuring the random function.................................40
19. Menu 9 - System settings.................................................................41
19.1 Menu 9.1 - Setting the time and date....................................... 42
19.2 Menu 9.5 - Configuring the switching time programme... 43
19.3 Menu 9.6 - Configuring the blockage detection................... 44
20. Menu 9.8 - Device settings ..............................................................47
20.1 Menu 9.8.1 - Switching the automatic summer/winter
time on/off ......................................................................................... 48
20.2 Menu 9.8.2 - Setting the display contrast................................ 49
20.3 Menu 9.8.4 - Setting the timer mode........................................ 49
20.4 Menu 9.8.5 - Switching the button lock on / off.................... 50
20.5 Menu 9.8.7- Switching the reversal of rotation
direction on/off................................................................................. 51
20.6 Menu 9.8.0 - Displaying the software version........................ 52
21. Deleting all settings, software reset..............................................53
22. Performing a hardware reset..........................................................54
23. Error messages ..................................................................................55
24. Dismantling........................................................................................55
25. Simplified EU declaration of conformity.......................................56
26. Warranty terms and conditions......................................................57
4
EN
i
1. This manual...
...describes how to install, connect the electrical system and operate
the Troll Standard.
1.1 How to use this manual
◆Before you begin, please read this manual through completely and
follow all the safety instructions.
◆Please also read the instruction manuals for the accessories (if avail-
able) as well as the manuals for the respective connected electrical
appliances.
◆This manual is part of the product. Please store it in an easily acces-
sible place.
◆When passing the Troll Standard on to a third party, this manual
must be passed on as well.
◆Damage resulting from non-compliance with this manual
and the safety instructions will void the warranty. We assume
no liability for any resulting damage.
i
5
EN
i
2. Hazard symbols
The following hazard symbols are used in this manual:
Danger of fatal electric shock
Danger area / dangerous situation
2.1 Levels of danger and signal words
DANGER!
This hazard will lead to serious injury or death if not avoided.
WARNING!WARNING!
This hazard may result in serious injury or death if not avoided.
CAUTION!
This hazard may result in minor or moderate injury if not avoided.
ATTENTION!
This hazard may lead to property damage.
i
7
EN
3. Safety instructions
There is a risk of fatal electric shock when touching electrical
components.
◆The electrical connection and all work on electrical systems must
only be carried out by a qualified electrician in accordance with the
connection instructions in these operating instructions.
◆All connection and installation work must only be carried out in a
de-energised state.
The use of defective devices can lead to personal injury and
damage to property (electric shocks / short circuiting).
◆Never use defective or damaged devices.
◆Check the Troll Standard for damage.
◆Please contact our Customer Service if you find any damage, see
page 60.
Improper use leads to an increased risk of injury.
◆Train all personnel to use the Troll Standard safely.
◆This device may be used by children from 8 years of age upwards as
well as by persons with reduced physical, sensory or mental capaci-
ties or with lack of experience and knowledge if they are supervised
or have been instructed on how to use the device safely and if they
understand what dangers may resulted from this.
◆Children must not play with the device.
◆Never remove the operating unit from the installation housing
during operation.
i
8
EN
3.1 Intended use
Use the Troll Standard only for connecting and controlling a tubular
motor for roller shutters, Venetian blinds, slats or awnings.
Operating conditions
◆The tubular motor must be fitted with a mechanical or electronic
end position switch.
◆Only operate the Troll Standard in dry rooms.
◆A 230 V/50 Hz power supply, together with a site-provided discon-
necting device (fuse), must be available at the installation location.
3.2 Improper use
Using the Troll Standard for purposes other than those previously men-
tioned is impermissible.
There is a risk to life caused through short circuiting and electric
shocks if the Troll Standard is used outside or in damp rooms.
Do not install and use the Troll Standard outdoors or in damp rooms.
3.3 Expert knowledge required by the installer
The electrical connection, installation and commissioning of the Troll
Standard must only be carried out by a qualified electrician in accord-
ance with the instructions in this manual..
i
i
i
9
EN
i
4. Included in delivery
Included in delivery
a) 1 x Operating unit (50 x 50 mm)
b) 1 x Frame
c) 1 x Installation housing
d) 1 x Instruction manual (not illustrated)
After unpacking please check and compare ...
... the contents of the package with those specified above.
a)
b) c)
10
EN
i
5. General view of the operating unit
1)
Pos. Symbol Description
1) Operating unit
2) Display
3)
M
Menu button
◆Open the main menu
◆Back to the previous menu or standard display
4) Setting buttons
◆Select a menu in the main menu
◆Set the parameters (more / less)
●Short press or press and hold =
gradual or quick setting
◆Switch functions on / off (On / OFF)
3) 4)
5)
6)
7)
8)
9)
2)
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Minutero de RADEMACHER
RADEMACHER
RADEMACHER DuoFern HomeTimer 9498-UW Manual de usuario
RADEMACHER
RADEMACHER Troll Comfort DuoFern Manual de usuario
RADEMACHER
RADEMACHER Modi 2650 Guía rápida
RADEMACHER
RADEMACHER SpeedTimer 3650 05 12 Hoja de especificaciones
RADEMACHER
RADEMACHER Troll Basic DuoFern 5615 Manual de usuario
RADEMACHER
RADEMACHER 3650 05 12 Manual de usuario
