Tekmar Timer 031 Manual de usuario

D 031

06/00

Timer 031

- Data Brochure

6 AM 9 AM 5 PM 10 PM

Temporary UnOccupied

Override at 1 PM

Temporary UnOccupied

Override at 7:30 AM

6 AM 9 AM 5 PM 10 PM

Temporary Occupied

Override at 1 PM

Temporary Occupied

Override at 7:30 AM

Su Sa

Mo WeTh FrTu

TIME

OCC

Su Sa

Mo WeTh FrTu

Temporary

Override

Permanent

Override

TIME

OCC

OVR

6 AM 9 AM 5 PM

Occupied

10 PM

Occupied / UnOccupied Schedule

Su Sa

Mo WeTh FrTu

SCHD AM

OCC

UnOccupied

Su Sa

Mo WeTh FrTu

SCHD PM

OCC

SCHD

UNOCC

Su Sa

Mo WeTh FrTu

SCHD

UNOCC

Su Sa

Mo WeTh FrTu

POWERING UP THE TIMER

After the Timer 031 is powered up, a number indicating

the software version is displayed for 1 second. Following

this, all elements are displayed for 4 seconds. If the

Timer has been turned off for more than 24 hours, the

Timer flashes 12:00 AM, the

OCC

element, and the

pointer to indicate that the clock must be set. Setting of

the clock is described in the Settings section of this

brochure. When power is removed from the Timer, the

display is turned off; however, the time clock continues

to operate on the backup battery for up to 24 hours. The

battery is generally good for forty 24 hour shut down

periods.

Occupied / UnOccupied mode

The Timer 031 has an internal relay which switches on

and off according to a programmed schedule of Occu-

pied and UnOccupied events. The Timer 031 allows up

to two schedules for each day of the week. During the

first schedule, the Timer turns on the

display element

and during the second schedule, the Timer turns on the

display element. Each schedule has an Occupied and

UnOccupied event. When the Timer is in Occupied

mode, the

OCC

element is displayed and the internal

relay is turned off.

With the relay turned off, the contacts between terminals

N/O — Com

(3 and 4) are opened and the

relay contacts between terminals

Com — N/C

(4 and 5) are closed. If the Timer 031 switches to

UnOccupied mode, the

UNOCC

element is displayed and the internal relay is turned on. With the

relay turned on, the contacts between terminals

N/O — Com

(3 and 4) are closed and the relay

contacts between terminals

Com — N/C

(4 and 5) are opened.

Schedule Override

The Timer 031 allows the user to override a given event temporarily or permanently. During a

temporary Override the Timer skips one single event. With a permanent Override, the Timer

remains continuously in either the Occupied or UnOccupied mode until the Override is manually

cancelled. The Override options are described in the Settings section in this brochure.

Temporary Occupied Override

When the Timer 031 is in Occupied mode and a Temporary Occupied Override is selected, the

OVR

element is flashed and the Timer skips the next UnOccupied event.

When the Timer is in UnOccupied mode and a Temporary Occupied Override is selected, the

OVR

element is flashed and the Timer immediately switches to Occupied mode.

Note: The OVR element turns off when the Temporary Override is terminated at the next event.

Temporary UnOccupied Override

When the Timer 031 is in Occupied mode and a Temporary UnOccupied Override is selected,

the

OVR

element is flashed and the Timer immediately switches to UnOccupied mode.

When the Timer is in UnOccupied mode and a Temporary UnOccupied Override is selected,

the

OVR

element is flashed and the Timer skips the next Occupied event.

Note: The OVR element turns off when the Temporary Override is terminated at the next event.

Su Sa

Mo WeTh FrTu

TIME

OCC

Su Sa

Mo WeTh FrTu

TIME

OCC

Su Sa

Mo WeTh FrTu

SCHD

TIME

AMPM

UNOCC

OVR

On Power-up

Timer 031

Item

Power 24 V (ac) ±10% 2 VA

32 V (dc) ±20 % 0.04A

Relay 240 V (ac) 8 A 1/4 hp

pilot duty 240 VA 2 A

N/C

SCHD

TIME

AMPM

UNOCC

OVR

SaMo We Th FrTu

2345

Power

N/O Com

C- R+

Cut jumper

for non-60 Hz

OverrideMenu

—Optimum Start / Stop

Lithium CR1620

POS (+) up

—

Off

Made in Canada

C US

158033

Wiring must be rated at least 300V

Sequence of Operation

The tekmar Timer 031 is a microprocessor-based timer which can be programmed to provide up to

two Occupied and two UnOccupied events per day for each day of the week.The Timer 031 operates

its internal SPDT relay based on the programmed schedule. The Timer 031 allows the user to over-

ride any programmed event temporarily or permanently.

In case of power shut down, the programmed information is retained in memory for at least 10 years.

The clock continues to operate using a backup battery for up to 24 hours, at which time it automati-

cally shuts itself down.

When used with a tekmar control, the Timer 031 has a special function which synchronizes the Occu-

pied / UnOccupied schedule with the Optimum Start / Stop feature on the tekmar control.

By cutting the jumper in the wiring chamber, the Timer 031 can be used in a non-60 Hz power system.

SCHD

TIME

AMPM

UNOCC

OVR

SaMo WeTh FrTu

Permanent Occupied Override

When the Timer 031 is in Occupied mode and a Permanent Occupied Override is selected, the

OVR

element is displayed and the Timer remains in Occupied mode until the Override is

cancelled.

When the Timer is in UnOccupied mode and a Permanent Occupied Override is selected, the

OVR

element is displayed and the Timer switches to Occupied mode until the Override is cancelled.

Note: The OVR element turns off when the Permanent Override is cancelled.

Permanent UnOccupied Override

When the Timer is in Occupied mode and a Permanent UnOccupied Override is selected, the

OVR

element is displayed and the Timer switches to UnOccupied mode until the Override is

cancelled.

When the Timer is in UnOccupied mode and a Permanent UnOccupied Override is selected,

the

OVR

element is displayed and the Timer remains in the UnOccupied mode until the Override

is cancelled.

Note: The OVR element turns off when the Permanent Override is cancelled.

Optimum Start / Stop

The Timer 031 has an

Optimum Start / Stop

option which synchronizes the Timer 031 UnOccupied

schedule with the

Optimum Start / Stop

feature on tekmar controls. The Timer 031 also

communicates the Override options to tekmar controls. The

Optimum Start / Stop

feature is

enabled by switching the DIP switch in the wiring chamber to the

position.

Installation

Caution

Improper installation and operation of this control could result in damage to equipment and possibly even personal injury. It

is your responsibility to ensure that this control is safely installed according to all applicable codes and standards.

STEP ONE GETTING READY

Check the contents of this package. If any of the contents listed are missing or damaged, please contact your wholesaler or tekmar sales

representative for assistance.

Type 031 includes

•One Timer 031

•One Data Brochure D 031 and one Data Brochure D 001

STEP TWO MOUNTING THE BASE

The Timer 031 is mounted in accordance with the instructions given in the Data Brochure D 001 for

Enclosure C.

STEP THREE ROUGH-IN WIRING

All electrical wiring terminates in the wiring chamber at the bottom of the Timer 031. The wiring to the Timer

031 is either inserted through the gap in the bottom of the enclosure or through the hole provided in the back

of the enclosure.

Power should not be applied to any of the wires during the rough-in wiring stage.

Run 18 AWG or similar wire from either a 24 V (ac) power supply or a 32 V (dc) power source to the wiring

chamber in the Timer 031. Do not connect the wires to any terminal until the voltage has been properly

tested.

Run 18 AWG or similar wire from the control to the wiring chamber in the Timer 031.

STEP FOUR TESTING AND CONNECTING THE WIRING

A good quality electrical test meter, capable of measuring 0 to 200 Volts is essential to properly test the

Timer 031.

Ensure exposed wires are not grounded or in contact with other wires and turn on the power supply. If a

24 V (ac) transformer is used, make sure the voltmeter is set to AC. With the voltmeter leads connected

to the secondary side of the transformer, you should measure between 22 and 26 V (ac). If a 32 V (dc) power

source is used, make sure the voltmeter is set to DC. Connect the positive lead from the voltmeter to the

positive terminal on the DC source and the negative lead from the voltmeter to the negative terminal on the

DC source. The voltmeter should measure between 26 and 38 V (dc). Turn the power off.

Connect the 24 V (ac) power supply to the

C- —R+

(1 and 2) terminals on the 031. If a 32 V (dc) power

source is used, the negative lead (-) of the source should be connected to the

C-

(1) terminal and the positive

lead (+) to the

R+

(2) terminal. When a (dc) power supply is used or if the (ac) power supply does not operate

at a stable frequency of 60 Hz, the jumper located in the wiring chamber of the 031 must be cut.

When the Timer 031 is used with a tekmar control, connect one end of the 18 AWG or similar wires to the

N/O —Com

(3 and 4) terminals on the 031 and connect the other end to the

Com Sen —UnO Sw

terminals

on the tekmar Control. For more information about wiring to the control, consult the Data Brochure supplied

with the control.

Note: The Com —N/C (4 and 5) terminals can be used to provide a closed contact during the

Occ event and an open circuit during the UnOccupied event.

24 V (ac) or

32 V (dc)

power

supply

To: Unoccupied Input

N/O closes during UnOcc

N/C opens during UnOcc

C-

R+

N/0 Com N/C

Power

Wiring can enter through

the back or the bottom of

the enclosure.

6 AM 9 AM 5 PM 10 PM

Permanent Occupied

Override at 1 PM

Permanent Occupied

Override at 7:30 AM

6 AM 9 AM 5 PM 10 PM

Permanent UnOccupied

Override at 1 PM

Permanent UnOccupied

Override at 7:30 AM

Power

Relay contacts

N/O Com

Lithium CR1620

POS (+) up

Cut jumper

for non-60Hz

Off | On —Opti

DIP

switch

OCCUPIED / UNOCCUPPIED EVENTS

Press and Release

the

button to

switch to the

Schedule Menu.

The Schedule Menu

is accessed from the

TIME

display.

Press and hold both

arrow keys until “dAy”

flashes. Select the

desired day using the

arrow keys.

Press and Release

the

Item

button to

select the first

Occupied event.

Use the arrow keys

to set the time for the

first Occupied

event.

Press and Release

the

Item

button to

select the first

UnOccupied event.

Use the arrow keys

to set the time for the

first UnOccupied

event.

Press and Release the

Item

button to select

the second Occupied

event.

Press and Release

the

Item

button to

select the second

UnOccupied event.

Use the arrow keys

to set the time for the

second

UnOccupied event.

Press and Release

the

Item

button to

select the next day to

be scheduled.

Use the arrow keys

to select the next day

to be scheduled.

Use the arrow keys

to set the time for the

second Occupied

event.

Repeat for

every day

Press and Release

the

button at

any time to return to

the

TIME

display.

Su Sa

Mo WeTh FrTu

SCHD

Su Sa

Mo WeTh FrTu

SCHD AM

OCC

Su Sa

Mo WeTh FrTu

SCHD AM

UNOCC

Su Sa

Mo WeTh FrTu

TIME

OCC

Su Sa

Mo WeTh FrTu

SCHD

Su Sa

Mo WeTh FrTu

Su Sa

Mo WeTh FrTu

SCHD PM

OCC

SCHD PM

UNOCC

TIME

Mo WeTh FrTu

OCC

Menu Item Override Menu Item Override Menu Item Override Menu Item Override

Menu Item Override Menu Item Override Menu Item Override

oror

or or or

Settings

Press and release

the

button to

switch to the

Schedule Menu.

Once the clock is set, the 031 displays

the time. During viewing or setting, the

031 always returns to the

TIME

display

if no buttons are pressed for 30

seconds.

Once in the Schedule Menu, “dAy”is

displayed. The arrow keys can be used

to choose the day to be viewed.

Press and release

the

Item

button to

view the first

Occupied event for

the day.

Su Sa

Mo WeTh FrTu

SCHD AM

OCC

If a schedule has been programmed, the time

of the first Occupied event is displayed. Keep

pressing the Item button to scroll through the

schedule for the day.

The

button can

be pressed at any

time to return to the

TIME

display.

Su Sa

Mo WeTh FrTu

SCHD

VIEWING THE TIME AND DAY

TIME

Mo WeTh FrTu

OCC

Menu Item Override Menu Item Override Menu Item Override

TIME

Mo WeTh FrTu

OCC

Menu Item Override

Press and Release

the

Item

button to

select minutes.

Use the arrow keys

to set the minutes.

Press and Release

the

Item

button to

select hours.

Use the arrow keys

to set the hour.

Press and Release

the

Item

button. The

word "dAy" flashes.

Use the arrow keys

to set the day.

Press the

Item

button

to view the time.

SETTING THE TIME AND DAY

Menu Item Override

Su Sa

Mo WeTh FrTu

TIME

OCC

Su Sa

Mo WeTh FrTu

TIME

Su Sa

Mo WeTh FrTu

TIME

Su Sa

Mo WeTh FrTu Su Sa

Mo WeTh FrTu

TIME

OCC

or or or

The clock must be

set when the 031

flashes “12:00”.

setting procedure.

TIME

Menu Item Override Menu Item Override Menu Item Override

Programming

Press and Release the

button to switch to

Schedule Menu.

The Schedule Menu is

accessed when the 031 is in

TIME

display.

Press and hold both arrow

keys until “dAy”flashes.

Select the position

“between”

and

Su.

All

day pointers will be

displayed. Follow the

procedure above to program

the schedule for all days.

Su Sa

Mo WeTh FrTu

SCHD

Programming the same schedule

for every day of the week

Su Sa

Mo WeTh FrTu

Once in the Schedule

Menu press the two arrow

keys simultaneously until

“dAy”flashes.

Press and hold the

Item

button and the arrows keys

simultaneously until “Clr”

appears.

“Clr”is displayed until the

buttons are no longer

pressed. All schedule

information is erased and

factory “Null”settings are

reset.

Clearing the schedule

Su Sa

Mo WeTh FrTu

Programming a “Null” event

Su Sa

Mo WeTh FrTu

Su Sa

Mo WeTh FrTu

SCHD

OCC

Once in the Schedule

Menu press the two arrow

keys simultaneously until

“dAy”flashes.

Press and Release the

Item

button until the desired

event is displayed.

Use the arrow keys to select

the “time”between 11:50

PM and 12:00 AM. A series

of lines are displayed

indicating that this event will

not occur during the

schedule

Note: To return to the

TIME

display press the

button or allow the Timer to time-out.

TIME

Mo WeTh FrTu

OCC

Menu Item Override Menu Item Override

SCHD

Menu Item Override

Limited Warranty and Product Return Procedure

Technical Data

Timer 031

Item

Power 24 V (ac) ±10% 2 VA

32 V (dc) ±20 % 0.04A

Relay 240 V (ac) 8 A 1/4 hp

pilot duty 240 VA 2 A

N/C

SCHD

TIME

AMPM

UNOCC

OVR

SaMo We Th FrTu

2345

Power

N/O Com

C- R+

Cut jumper

for non-60 Hz

OverrideMenu

—Optimum Start / Stop

Lithium CR1620

POS (+) up

—

Off

Made in Canada

C US

158033

Wiring must be rated at least 300V

Temporary Occupied

Override

Press and release the

Override

button to select

a Temporary Occupied

Override.

Temporary UnOccupied

Override

Press and release the

Override button for a

second time to select a

Temporary UnOccupied

Override.

Menu Item Override Menu Item Override Menu Item Override

Su Sa

Mo WeTh FrTu

UNOCC

OVR

Menu Item Override

Su Sa

Mo WeTh FrTu

OVR

Menu Item Override

Permanent Occupied

Override

Press and release the

Override button for a

third time to select a

Permanent Occupied

Override.

Permanent UnOccupied

Override

Press and release the

Override button for a

fourth time to select a

Permanent UnOccupied

Override.

Press and Release the

Override button for a fifth

time to turn the Override

option off.

SETTING THE OVERRIDE OPTIONS

Su Sa

Mo WeTh FrTu

OCC

OVR

TIME

OCC

Su Sa

Mo WeTh FrTu Su Sa

Mo WeTh FrTu

OCC

OVR

Su Sa

Mo WeTh FrTu

UNOCC

OVR

Note: After selecting the desired Override option, allow the 031 to time-out to the

TIME

display or press the Menu button.

To cancel an Override option, press the Override button when the 031 is in

TIME

display.

The Override Options

are accessed when the

031 is in

TIME

display.

The installer must ensure that this control and its wiring are isolated and / or shielded from strong sources of electromagnetic noise.

Conversely, this electronic control does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the

Radio Interference Regulations of the Canadian Department of Communications. If this equipment does cause interference, the user is

encouraged to try to correct the interference by reorienting the receiving antenna and / or relocating the receiver with respect to this

equipment.

Le présent numérique n'émete pas de bruits radioeléctriques dépassant les limites applicables aux appareils numériques de Classe B

prescrites dans le réglement sur le brouillance radioeléctriques édicte par le Ministére des Communications du Canada.

Limited Warranty The liability of tekmar Control Systems Ltd. and tekmar

Control Systems, Inc. (“tekmar”) under this warranty is limited.The purchaser,

by taking receipt of the tekmar product (“product”), acknowledges receipt of

the terms of the warranty and acknowledges that it has read and

understands same.

tekmar warrants each tekmar product against defects in workmanship and materi-

als, if the product is installed and used in compliance with tekmar's instructions. The

warranty period is for a period of twenty-four (24) months from the production date

if the product is not installed during that period, or twelve (12) months from the

documented date of installation if installed within twenty-four (24) months from the

production date.

The liability of tekmar under this warranty shall be limited to, at tekmar's sole dis-

cretion: the cost of parts and labor provided by tekmar to repair defects in materials

and/or workmanship of the defective product; or to the exchange of the defective

product for a replacement product; or to the granting of credit limited to the original

cost of the defective product, and such repair, exchange or credit shall be the sole

remedy available from tekmar, and, without limiting the foregoing in any way,

tekmar is not responsible, in contract, tort or strict product liability, for any

other losses, costs, expenses, inconveniences, or damages, whether direct, indi-

rect, special, secondary, incidental or consequential, arising from ownership or use

of the product, or from defects in workmanship or materials, including any liability

for fundamental breach of contract.

This warranty applies only to those products returned to tekmar during the

warranty period. This warranty does not cover the cost of the parts or labor

to remove or transport the defective product, or to reinstall the repaired or

replacement product. Returned products that are not defective are not cov-

ered by this warranty.

This warranty does not apply if the product has been damaged by negligence

by persons other than tekmar, accident, fire, Act of God, abuse or misuse; or

has been damaged by modifications, alterations or attachments made sub-

sequent to purchase which have not been authorized by tekmar; or if the

product was not installed in compliance with tekmar’s instructions and the

local codes and ordinances; or if due to defective installation of the product;

or if the product was not used in compliance with tekmar’s instructions.

This warranty is in lieu of all other warranties, express or implied, which the

Governing Law (being the law of British Columbia) allows parties to contrac-

tually exclude, including, without limitation, warranties of merchantability,

fitness for a particular purpose, durability or description of the product, its

non-infringement of any relevant patents or trademarks, and its compliance

with or non-violation of any applicable environmental, health or safety legis-

lation; the term of any other warranty not hereby contractually excluded is

limited such that it shall not extend beyond twenty-four (24) months from the

production date, to the extent that such limitation is allowed by the Govern-

ing Law.

Product Return Procedure Products that are believed to have defects in work-

manship or materials must be returned, together with a written description of the

defect, to the tekmar representative for that territory. If the address of the repre-

sentative is not known, please request it from tekmar at the telephone number

listed below.

Control Systems

tekmar Control Systems Ltd., Canada

tekmar Control Systems, Inc., U.S.A.

Head Office: 5100 Silver Star Road

Vernon, B.C. Canada V1B3K4

Tel. (250) 545-7749 Fax. (250) 545-0650

Web Site: www.tekmarcontrols.com

tekmar Control Systems Ltd. and tekmar Control Systems, Inc.

All specifications are subject to change without notice.

Printed in Canada. D 031 - 06/00.

4 of 4

Timer 031

Literature —D 031, D 001

Control —Microprocessor-based; This is not a safety (limit) device.

Packaged weight —0.5 lb. (430 g), Enclosure C, white PVC plastic

Dimensions —4-3/4”H x 2-7/8 W x 7/8”D (120 x 73 x 22 mm)

Approvals —CSA C US, meets ICES & FCC regulations for EMI/RFI.

Ambient Conditions —Indoor use only, 32 to 122°F (0 to 50°C), < 90% RH non-

condensing.

Power supply —Class 2, 24 V (ac) ±10% 2 VA or 30 V (dc) ±20% 0.04 A

Relay —240 V (ac) 8 A 1/4 hp, pilot duty 240 VA 2 A

Battery backup —CR1620 Lithium non-rechargeable gives 40 events of 24 hours

power down.

Schedule memory —Maintained for at least 10 years of power down.

Timer

—7 day, 2 Occ & UnOcc events per day.

Adjustment —10 minute increments.

Otros manuales de Minutero de Tekmar

Tekmar

Tekmar TekmarNet 4 033 Manual de usuario

Manuales populares de Minutero de otras marcas

Intermatic

Intermatic P1131 Manual de usuario

Learning Resources

Learning Resources Time Tracker mini Manual de usuario

CEBEK

CEBEK I-215 Manual de usuario

Somogyi

Somogyi home TS MD 5 Manual de usuario

Profile

Profile 010200280 Manual de usuario

Gizmo

Gizmo T4 Manual de usuario

Daikin

Daikin DST301B61 Manual de usuario

sisel

sisel ENDA ETM2432 Manual de usuario

B&Q

B&Q TE103 Manual de operación y mantenimiento

Hozelock

Hozelock AC Plus 2700 Manual de usuario

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Manual de usuario

Tork

Tork TU40 Manual de usuario

Emos

Emos EMT400F Manual de usuario

FarmTek

FarmTek Polaris Manual de usuario

Maximum

Maximum CRONUS Manual de usuario

Uberhaus

Uberhaus TD133B Manual de usuario

Clas Ohlson

Clas Ohlson 31-3766 Manual de usuario

Gewiss

Gewiss 90 AM Series Manual de usuario