Quantum PowerStor L200 Manual de usuario

Document 6322502-01, Ver. 1, Rel. 0

February 1999

ATL PowerStor L200 Series

Library Unpacking Instructions

Introduction....................................................................................................3

Purpose.....................................................................................................3

Library Configurations ..........................................................................3

Selecting an Installation Location ...............................................................4

Floor Space...............................................................................................4

Overhead Clearance...............................................................................4

Surface Strength and Inclination..........................................................5

Power and Grounding ...........................................................................5

Environmental Specifications ...............................................................5

Unpacking the Library..................................................................................6

Before You Begin.....................................................................................6

Uncrating the Rack-Mount Kit..............................................................6

Installing the Rack-Mount Kit...............................................................6

Uncrating the Library.............................................................................7

ATL PowerStor L200 Series Library Unpacking Instructions

Document 6322502-01, Ver. 1, Rel. 0

February 1999

ATL PowerStor L200 Series Library Unpacking Instructions0

Document 6322502-01, Ver. 1 Rel. 00

February 1999

Introduction 3

Introduction 0

Purpose 0The ATL PowerStor L200 Series is an automated storage and retrieval

library system consisting of one DLTTM tape drive and eight DLTtape

cartridges (see figure 1).

This document explains how to unpack the L200 Series library

properly. Once the library is unpacked and moved to the desired

installation location, set up the library using the instructions in the

ATL Powerstor L200 Series Library User’s Guide.

Figure 1 ATL PowerStor

L200 Series Library

Library Configurations 1The L200 Series is shipped in two configurations:

•desktop configuration

•rack-mount configuration

ATL PowerStor L200 Series Library Unpacking Instructions

Document 6322502-01, Ver. 1 Rel. 0

February 1999

4 Selecting an Installation Location

Selecting an Installation Location 1

When selecting an installation location for the library, consider the

following:

•floor space

•overhead clearance

•installation surface strength and inclination

•power and grounding

•environmental specifications

Floor Space 1Figure 2 shows the floor space requirements for setting up and

operating the desktop and rack-mount library.

Figure 2 Floor Space

Requirements

The width of the desktop library is 8.9 inches (22.5 cm). The width of

the rack-mount library is 8.6 inches (21.9 cm). The depth of both

library versions is 22.8 inches (57.8 cm).

Overhead Clearance 2The height of the stand-alone library is 7.6 inches (19.4 cm). The height

of the rack-mount library is 6.9 inches (17.5 cm).

To remove and replace the library enclosure, you need an overhead

clearance slightly greater than the height of the library.

8.9 inches

22.8 inches

Front

Back

(22.5 cm)

(57.8 cm)

8.6 inches

(21.9 cm)

Desktop

Rack-

mount

ATL PowerStor L200 Series Library Unpacking Instructions0

Document 6322502-01, Ver. 1 Rel. 00

February 1999

Selecting an Installation Location 5

Surface Strength and

Inclination 2

Place the library and rack on a clean, level surface. If the library will be

placed on a desk or table, make sure it is sturdy enough to support the

library’s weight (37 lbs/16.8 kg).

Power and Grounding 2The electrical ratings for the library are 100 to 120/200 to 240 VAC, 50/

60 Hertz.

Environmental

Specifications 2

The installation location should meet the following environmental

specifications.

•Temperature: 50°F to 104°F (10°C to 40°C)

•Relative humidity: 20% to 80% noncondensing

•Humidity gradient: 10% per hour

•Dry bulb temperature: 50°F to 104°F (10°C to 40°C)

•Wet bulb temperature: 77°F (25°C)

•Temperature gradient: 19.8°F per hour (11°C per hour) across the

range

•Temperature shock: 18°F (10°C) over two minutes

•Altitude: -500 feet to 30,000 feet (-152.4 meters to 9144 meters)

ATL PowerStor L200 Series Library Unpacking Instructions

Document 6322502-01, Ver. 1 Rel. 0

February 1999

6 Unpacking the Library

Unpacking the Library 2

Unpack the library as close to the installation location as possible.

The unpacking instructions vary depending upon whether you

received a desktop or rack-mount library. If you received a desktop

library, you should have only one shipping carton. Follow the

instructions in “Uncrating the Library” on page 7 to unpack the

library.

If you received the rack-mount library, you will have two shipping

cartons. The large carton contains the library, and the smaller carton

contains the rack-mount kit.

To unpack and install the rack-mount library, you must:

•Uncrate the rack-mount kit and verify its contents (see “Uncrating

the Rack-Mount Kit”).

•Install the rack-mount kit in the rack (see “Installing the

Rack-Mount Kit”).

•Uncrate the library and place it in the rack (see “Uncrating the

Library”).

Before You Begin 2Inspect the shipping pallet and carton for damage that may have

occurred during shipment. Report any damage to the shipper

immediately.

Uncrating the

Rack-Mount Kit 2

Cut the packing tape at the top of the shipping carton and unpack the

rack-mount kit. Before installing the rack-mount kit in the rack,

compare the contents of the carton with the packing list inside the

shipping carton.

Installing the

Rack-Mount Kit 2

Install the rack-mount kit in the rack, referring to the drawing

provided in the shipping carton.

ATL PowerStor L200 Series Library Unpacking Instructions0

Document 6322502-01, Ver. 1 Rel. 00

February 1999

Unpacking the Library 7

Uncrating the Library 2To uncrate an ATL PowerStor L200 Series library:

Procedure

1Cut the straps that secure the shipping carton to the pallet (see

figure 3).

2Lift the carton off of the pallet.

Caution: The library weighs 37 lbs (16.8 kg). Two people should

perform any procedure that involves lifting or moving the

library.

3Open the top of the shipping carton by carefully cutting the

packing tape.

Figure 3 Removing the

Shipping Carton from the

Pallet

4Remove the accessory kit from the carton (see figure 4).

Straps

Pallet

Packing tape

Shipping carton

ATL PowerStor L200 Series Library Unpacking Instructions

Document 6322502-01, Ver. 1 Rel. 0

February 1999

8 Unpacking the Library

Figure 4 Removing the

Accessories Boxes

Procedure (continued)

5Remove the packing foam from the top of the library (see figure 5).

6With two people lifting the library, remove it from the shipping

carton.

7Remove the library from the shipping bag.

8Place the library in the installation location. If it is a rack-mount

library, place it in the rack.

Accessory kit

ATL PowerStor L200 Series Library Unpacking Instructions0

Document 6322502-01, Ver. 1 Rel. 00

February 1999

Unpacking the Library 9

Figure 5 Removing the

Library from the Shipping

Carton

The library is now unpacked. Refer to the ATL PowerStor L200 Series

Library User’s Guide for information about connecting the library cables

and operating the library.

Packing foam

Shipping bag

Library

Otros manuales para PowerStor L200

Tabla de contenidos

Otros manuales de Almacenamiento de Quantum

Quantum

Quantum StorNext QD6000 Manual de usuario

Quantum

Quantum Scalar i6000 Manual de usuario

Quantum

Quantum 4000 Enhanced Instrucciones de funcionamiento

Quantum

Quantum PX500 Series Guía de inicio rápido

Quantum

Quantum DLTtape SDLT 600 Manual de usuario

Quantum

Quantum Scalar i40 Manual de usuario

Quantum

Quantum ACL 4/52 Manual de usuario

Quantum

Quantum QX Series Manual de usuario

Quantum

Quantum Scalar i500 Manual de usuario

Quantum

Quantum Scalar i6000 Manual de uso y cuidado

Quantum

Quantum Scalar 24 Manual de usuario

Quantum

Quantum DLT 1 Manual de usuario

Quantum

Quantum Atlas III Manual de instrucciones

Quantum

Quantum SNC 5100 Manual de instrucciones

Quantum

Quantum DLT 8000 Manual

Quantum

Quantum DXi4500 Manual de usuario

Quantum

Quantum Atlas 10K II Manual de usuario

Quantum

Quantum Scalar 24 Instrucciones de funcionamiento

Quantum

Quantum DLTtape DLT 4000 Manual de usuario

Quantum

Quantum DLT-V4 Manual de usuario

Quantum

Quantum StorNext QM1200 Manual de usuario

Quantum

Quantum Scalar i40 Manual de usuario

Quantum

Quantum FastStor 1 Manual de usuario

Quantum

Quantum LTO-4 (Model B) Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario