PSC Duet Manual

Programming Kit

DUET™/ VS800™

Scanner

DUET Scanner

VS800 Scanner

PSC Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

Telephone:(541)683-5700

Telefax:(541) 345-7140

PSC and the PSC logo are registered trademarks of PSC INC. Duet

and VS800 are trademarks of PSC INC.

This manual and its contents are copyrighted, with all rights re-

served. Undercopyrightlaw,thismanualmaynotbecopiedinwhole

or in part without the prior written consent of PSC. The same

proprietary and copyright notices must appear on any permitted

copies as appear on the original. This exception does not permit

copies to be made for others, whether or not sold. Under the law,

copying includes translating into another language or format.

The information and specifications contained in this manual are

subject to change without notice. PSC shall not be held liable for

damages resulting from the use or misuse of the information

containedherein.

R44-1740 i

Contents

Programming Your Scanner ......................................................... 2

Programmable Features .............................................................. 5

Return to Factory Settings ........................................................... 6

Additional Features ...................................................................... 7

Programmable Rear Scan Line.................................................... 9

Programmable Speaker Features .............................................. 11

LED Lamp/Indication Features .................................................. 28

Timeouts .................................................................................... 31

Setting Laser Timeout ....................................................... 32

Setting Motor Timeout ....................................................... 36

Setting Double Read Timeout ........................................... 41

Interface Selection ..................................................................... 47

Changing Interfaces .......................................................... 48

RS-232 Interface Configuration ................................................ 71

RS-232 Restrictions .......................................................... 72

RS-232 Host Echo Feature ............................................... 93

RS-232ACK/NAK Options .............................................. 109

OCIA Interface Configuration ................................................. 114

Wand Interface Configuration ................................................ 121

Keyboard Wedge Interface Configuration .............................. 134

IBM 46xx Configuration ......................................................... 157

Duet™

and VS800™

Scanner Programming Kit

Label Transmit

Format Configuration Items ..................................................... 164

Setting Label I.D.............................................................. 165

Symbology Selection ............................................................... 172

UPC/EAN Options ................................................................. 186

UPC/EAN Expansion ...................................................... 188

UPC/EAN Check Digit Transmission............................... 196

UPC/EAN/Instore Minimum

Read Settings.................................................................. 209

Code 39 Options ...................................................................... 230

Code 39 Stitching Options .............................................. 241

Code 128 Options .................................................................. 263

Code 128 Minimum Read Settings ................................. 265

Interleaved 2 of 5 Options........................................................ 274

I 2 of 5 Minimum Read Settings.............................................. 280

I 2 of 5 Length Control..................................................... 285

I 2 of 5 Fixed Length ....................................................... 301

Codabar Options .................................................................... 336

Codabar Minimum Read Settings ................................... 342

MSI/Plessey Options ............................................................... 355

MSI/Plessey Minimum Read Settings ............................. 363

Index ........................................................................................ 368

R44-1740 1

Programming with

Bar Codes

This programming kit contains the procedures and

bar code programming labels necessary to set the

scanner's programmable features.

Duet™

and VS800™

Scanner Programming Kit

Programming Your Scanner

To program your scanner:

1. Power up the scanner to be pro-

grammed by one of the following

methods:

• Connect the scanner's interface cable

at the scanner. Plug the AC/DC

Adapter into an electrical outlet of

the appropriate voltage and connect

its other end at either the port

located on the scanner's interface

cable connector (furthest from the

scanner) or its "pigtail" connection

(see Figure 1*).

• If the scanner is configured to

receive power off the terminal

(POT), connect the scanner via its

interface cable to a working host

terminal.

Wait for the scanner to complete the Selftest

routine and emit four tones. The green lamp will

light dimly, indicating that the scanner is in

normal Operating Mode.

R44-1740 3

Figure 1. Power Up Scanner

Duet

™ Scanner

I/F Cable

AC/DC Power

Adapter

HostTerminal

Connector *

Interface Connector

DC Power

Connector

AC Power

Duet™ Scanner HostTerminal *

Connector

I/F Cable

AC/DC Power

Adapter

To Host

Terminal

Interface Connector

DC Power

Supply

Connector

AC Power

BarrelType

Connector

Duet

™ Scanner HostTerminal

Connector *

I/F Cable To Host

Terminal

Interface Connector

AC/DC Power Supply

AC/DC power supply into

DC power connector

Power-OffTerminal

1. Connnect the I/F cable to the

scanner.

2. Connect the DC power cord

into the side of the connector.*

3. Connect the I/F cable into the

host terminal.

4. Connect the AC/DC power

supply into an AC outlet.

1. Connnect the I/F cable to

the scanner.

2. Connect the I/F cable

to the terminal.

3. Connect the DC power

plug into the DC power

connector.

4. Connect the AC/DC power

supply into an AC outlet.

1. Connect the I/F cable to the

scanner.

2. Connect the I/F cable to the

host terminal

Your host terminal connection may be

different.

Duet™

and VS800™

Scanner Programming Kit

2. Put the scanner into Programming

Mode by scanning the Programming

Switch bar code located on the next

page and on the inside back cover.

The green LED flashes continuously

indicating that the scanner is in

Programming Mode.

3. Scan the programming bar code(s) for

the feature you want to change. The

scanner will emit three beeps to

indicate that the bar code has been read

and the setting has been stored in the

scanner’s memory. Scan the remaining

programming bar codes as required.

If a bar code scanned is not a valid

programming bar code, the scanner

will emit a “chirping” (rapid beeping)

rejection tone.

4. After all the desired programming bar

codes have been successfully scanned, exit

Programming Mode by scanning the

Programming Switch bar code once

again. The scanner will reset and emit

four beeps during the power-up se-

quence.

R44-1740 5

The green lamp will light dimly, indicat-

ing that the scanner is ready for normal

operation.

Switch Label

Programmable Features

The remainder of this programming kit contains

programming bar codes for all programmable

features for the Duet™ and VS800 scanners. Refer

to the detailed features listing shown in the index

at the back of this manual to find the individual

features that you wish to change.

Duet™

and VS800™

Scanner Programming Kit

Return to Factory Settings

Use this bar code to reset all options back to the

original factory default settings for the current

interface. For example, if your scanner's current

interface is RS-232, all settings will return to the

scanner's original factory settings for the RS-232

interface.

NOTE

Any settings you have selected in a pre-

vious programming session will be lost.

6 500000 000009

Otros manuales para Duet

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Lector de código de barras de PSC

PSC

PSC QuickScan QS2500 Manual de usuario

PSC

PSC LazerData 11000 Series Manual de usuario

PSC

PSC PSRF-1000 Guía del usuario

PSC

PSC PowerScan Handheld Instrucciones de funcionamiento

PSC

PSC QRG QuickScan QS3500 Manual de usuario

PSC

PSC LazerData Series 9000E Manual de usuario

PSC

PSC vs1200 Manual de usuario

PSC

PSC LazerData 12000 Series Manual de usuario

PSC

PSC QuickScan QS2500 Manual de instalación y operación

PSC

PSC QuickScan QS6500 Manual de usuario

PSC

PSC Falcon PT40 Manual de instalación y operación

PSC

PSC HD Manual de usuario

PSC

PSC QuickScan QS6500 Manual de usuario

PSC

PSC Scanners Instrucciones de funcionamiento

PSC

PSC HS1250, Manual de usuario

PSC

PSC LINEAR IMAGER 7000 Manual de instalación y operación

PSC

PSC QuickScan QS2500 Manual de instalación y operación

PSC

PSC Magellan 2200VS omega Manual de usuario

PSC

PSC SP400rf Instrucciones de funcionamiento

PSC

PSC MAGELLAN 1000I Manual de instalación y operación

PSC

PSC PowerScan RF Guía del usuario

PSC

PSC MAGELLAN 1000I Manual de usuario

PSC

PSC HS1250, Manual de usuario

PSC

PSC Magellan 2200VS omega Manual de instalación y operación

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario