Prorack K469 Manual de usuario
K469
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 4 x 4 x 4 x 4
Revision No: 4D 1
Fitting Kit K469
MAX kgs (lbs)
W/P WHD
Toyota
4 Runner, 5dr SUV 96-02 US 75 kgs (165 lbs) 75 kgs (165 lbs)
4 Runner, 5dr SUV 96-03 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
4 Runner, 5dr SUV 96-03 CN 75 kgs (165 lbs) 75 kgs (165 lbs)
Tacoma Crew Cab, 4dr Truck 95-04 US 75 kgs (165 lbs) 75 kgs (165 lbs)
Ford
F250 Crew Cab, 4dr Truck 09-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
F250 Crew Cab, 4dr Truck 99-07 US 75 kgs (165 lbs) 75 kgs (165 lbs)
F250 Double Cab, 4dr Ute 05-09 ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
F250 Extended Cab, 4dr Truck 99-07 US 75 kgs (165 lbs) 75 kgs (165 lbs)
F250 Supercab, 4dr Truck 09-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
F350 Crew Cab, 4dr Truck 04-08 US 75 kgs (165 lbs) 75 kgs (165 lbs)
F350 Crew Cab, 4dr Truck 09-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
F450 Crew Cab, 4dr Truck 09-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
Nissan
Quest, 5dr MPV 04-09 US 75 kgs (165 lbs) 75 kgs (165 lbs)
Quest, 5dr MPV 05-06 CN 75 kgs (165 lbs) 75 kgs (165 lbs)
2
Fitting Kit K469
X
A B C 1 2 3
4 Runner, 5dr SUV 96-02 (US) -300mm 400mm - 830mm 830mm -
-11 -13/16ths" 15 3/4ths" - 32 11/16ths" 32 11/16ths" -
4 Runner, 5dr SUV 96-03 (EU) -300mm 400mm - 830mm 830mm -
-11 -13/16ths" 15 3/4ths" - 32 11/16ths" 32 11/16ths" -
4 Runner, 5dr SUV 96-03 (CN) -300mm 400mm - 830mm 830mm -
-11 -13/16ths" 15 3/4ths" - 32 11/16ths" 32 11/16ths" -
F250 Crew Cab, 4dr Truck 09-+ (US) -200mm 600mm - 1149mm 1149mm -
-7 -7/8ths" 23 5/8ths" - 45 1/4ths" 45 1/4ths" -
F250 Crew Cab, 4dr Truck 99-07 (US) -200mm 600mm - 1160mm 1155mm -
-7 -7/8ths" 23 5/8ths" - 45 11/16ths" 45 1/2ths" -
F250 Double Cab, 4dr Ute 05-09 (ZA) -200mm 600mm - 1149mm 1149mm -
-7 -7/8ths" 23 5/8ths" - 45 1/4ths" 45 1/4ths" -
F250 Extended Cab, 4dr Truck 99-07 (US) -350mm 350mm - 1160mm 1160mm -
-13 -3/4ths" 13 3/4ths" - 45 11/16ths" 45 11/16ths" -
F250 Supercab, 4dr Truck 09-+ (US) -350mm 350mm - 1149mm 1149mm -
-13 -3/4ths" 13 3/4ths" - 45 1/4ths" 45 1/4ths" -
F350 Crew Cab, 4dr Truck 04-08 (US) -200mm 600mm - 1149mm 1149mm -
-7 -7/8ths" 23 5/8ths" - 45 1/4ths" 45 1/4ths" -
F350 Crew Cab, 4dr Truck 09-+ (US) -200mm 600mm - 1149mm 1149mm -
-7 -7/8ths" 23 5/8ths" - 45 1/4ths" 45 1/4ths" -
F450 Crew Cab, 4dr Truck 09-+ (US) -200mm 600mm - 1149mm 1149mm -
-7 -7/8ths" 23 5/8ths" - 45 1/4ths" 45 1/4ths" -
Quest, 5dr MPV 04-09 (US) 200mm 900mm - 960mm 960mm -
7 7/8ths" 35 7/16ths" - 37 13/16ths" 37 13/16ths" -
Quest, 5dr MPV 05-06 (CN) 200mm 900mm - 960mm 960mm -
7 7/8ths" 35 7/16ths" - 37 13/16ths" 37 13/16ths" -
Tacoma Crew Cab, 4dr Truck 95-04 (US) -200mm 500mm - 845mm 845mm -
-7 -7/8ths" 19 11/16ths" - 33 1/4ths" 33 1/4ths" -
3
Fitting Kit EN
K469
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
NOTE: Clamp images in these instructions may
not be representative of the clamps in this kit
4
Fitting Kit EN
K469
●Use keys to remove covers.
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
5
Fitting Kit EN
K469
●Remove locking screw.
●Apply protective strip as shown.
Trim if required.
●A = Clear
B = Grey
●Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
6
Fitting Kit EN
K469
●Refit locking screw so that it goes through
the hole in the clamp. Do not begin to
tighten the locking screw.
●Fit rubber pads (supplied with fitting kit) to
foot.
●Make sure the pad fits into the holes
underneath the foot.
7
Fitting Kit EN
K469
Fitment
●Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
●Please check the front of this manual for
information relating specifically to your
vehicle.
●Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
●Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
8
Fitting Kit EN
K469
●Tighten locking screw on both legs evenly.
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
9
Fitting Kit EN
K469
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
10
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Prorack
Prorack
Prorack WHISPBAR S46 Manual de operación e instalación
Prorack
Prorack K084 Manual de usuario
Prorack
Prorack PR3213 Manual de usuario
Prorack
Prorack K376 Manual de usuario
Prorack
Prorack K1173 Manual de usuario
Prorack
Prorack K631 Manual de usuario
Prorack
Prorack K916 Manual de usuario
Prorack
Prorack K458 Manual de usuario
Prorack
Prorack K501 Manual de usuario
Prorack
Prorack K115 Manual de usuario
Prorack
Prorack K385 Manual de usuario
Prorack
Prorack K694 Manual de usuario
Prorack
Prorack K004 Manual de usuario
Prorack
Prorack K834 Manual de usuario
Prorack
Prorack K375 Manual de usuario
Prorack
Prorack K192 Manual de usuario
Prorack
Prorack K382 Manual de usuario
Prorack
Prorack K358 Manual de usuario
Prorack
Prorack K435 Manual de operación e instalación
Prorack
Prorack K611 Manual de usuario
