Promax SATELLITE HUNTER Manual de usuario

PRODIG-1

• Thank you for buying

our PRODIG-1

Satellite Hunter

• Aligning a satellite

dish to a digital

satellite will be quick

and easy with the

PRODIG-1

GETTING STARTED

PRODIG-1

• This document takes you through a step by step procedure

to get familiarised with the PRODIG-1 use and

applications

•We recommend you to take few

minutes to read it carefully because it

can be very helpful for you

GETTING STARTED

PRODIG-1

• PRODIG-1 needs to be programmed before use with

transponder information from the satellites you need to

work with.

• Each set of transponder data (frequency, FEC, ....) will

become a test point on board the PRODIG-1 which you

can label to identify it easily.

GETTING STARTED

PRODIG-1

• Please, check if the satellites / transponders pre-

programmed in the PRODIG-1 you have just taken from

the box are good for your application

GETTING STARTED

PRODIG-1

TEST POINT NAME

(4 characters)

FREQUENCY

(IF)

LNB

VOLTAGE

22 KHz

(Yes or No)

FEC

(2/3, 3/4, …)

Symbol Rate

TP0 DISH 1186 18 No ¾ 20000

TP1

TP2

•If the configuration is not good for

your application, please, go to the

“MODIFYING CONFIGURATION”

section.

GETTING STARTED

PRODIG-1

• Make sure batteries are charged

and eventually charge them for

few hours using the AL-101

power adapter supplied

• Connect the dish LNB to the

PRODIG-1

• Switch on by pressing on key #

1 for more than a second

STEP 1 - DETECTING A SATELLITE

PRODIG-1

• Move the dish towards the position where you’d expect to

find the satellite you wish to align

• As soon as you receive signals from a satellite the bargraph

will show some activity and the acoustic indicator will beep

STEP 1 - DETECTING A SATELLITE

PRODIG-1

• Move the dish smoothly up down left and right to get the

maximum bargraph deviation

• Display will be also showing some additional information:

STEP 1 - DETECTING A SATELLITE

PRODIG-1

Actual LNB

voltage supplied

22 KHz signal

On /Off

Maxhold of the

Signal Energy reading

Signal Energy

on bargraph

Current Signal Energy reading

• These are some of the messages you can get on the display:

- “CABLE SHORT” Look for a short circuit in the cable

to the LNB, connectors, LNB itself...

- “NO LNB” Check connectors and LNB. Check that the

cable run is not too long

STEP 1 - DETECTING A SATELLITE

PRODIG-1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Promax

Promax

Promax PROLITE-55 Manual de usuario

Promax

Promax HD Ranger + Manual de usuario

Promax

Promax RANGER Neo 2 Manual de usuario

Promax

Promax PRODIG-5 Manual de usuario

Promax

Promax RANGER Neo 2 Manual de usuario

Promax

Promax Prolite-50 Manual de usuario

Promax

Promax PROLITE-63B Manual de usuario

Promax

Promax PROPOWER-5 Manual de usuario

Promax

Promax HD Ranger + Manual de usuario

Promax

Promax 6 Manual de usuario

Promax

Promax PD-181 Manual de usuario

Promax

Promax PROWATCH TELMO Manual de usuario

Promax

Promax TVHUNTER+ Manual de usuario

Promax

Promax HD Ranger Lite Manual de usuario

Promax

Promax PROMAX-10 Manual de usuario

Promax

Promax RANGERNeo 4 Manual de usuario

Promax

Promax RANGER mini Manual de usuario

Promax

Promax TV EXPLORER II Manual de usuario

Promax

Promax PROLINK-4C Manual de usuario

Promax

Promax PROFI-70 Manual de usuario

Promax

Promax PROMAX-8+ Manual de usuario

Promax

Promax RANGER Neo 2 Manual de usuario

Promax

Promax HD RANGER 2 Manual de usuario

Promax

Promax RANGERNeo Lite Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario