Pro-Lift WMH Series Manual de usuario



ThankyouforpurchasingaPro‐LIFTWMH.ThePro‐LIFTproductlineisdesignedtoenhanceyour

interactivewhiteboardsandprojectorsorLCD.Pleasefollowallassemblyinstructionscorrectlyto

provideoptimaluse.

OnlyaqualifiedcontractorshouldinstallthePro‐LIFTWMH.Ifyoudonotunderstandanyofthe

assemblyinstructions,pleasecontactyourlocalre‐sellerorvisitwww.proliftstand.com.

IMPROPERINSTALLATIONCANCAUSEDAMAGETOYOURPro‐LIFTANDLEADTOSERIOUSPHYSICAL

INJURY.JOROManufacturingcannottakeanyresponsibilityfordamageorinjuryresultingfrom

improperinstallation.

DonotoperatePro‐LIFTWMHifthereareanyobstructionsbeloworabovethe

board.Doingsomaycauseunitmalfunctionorleadtoseriousphysicalinjury.

ThesuppliedmountinghardwareisforuseonthePro‐LIFTstandsonly.Ifyouencounteranyproblems

orinsufficienthardwareduringinstallation,pleasecontactyourlocalre‐seller.

M6x8mm SILVER Button Head

ProLift WM Hybrid - WMHW ASSY Instructions : 0.003

JORO Button Head

WB Fastener Kit

(ONLY available with WMHW Models)

LCD Mount Fastener Kit

(ONLY available with WMHL Models)

Note: Parts may not be exactly as shown and not to scale

WMH Main Frame Kit

JORO Button Head

16x

M6x8mm SILVER Button Head

5/16x3/4" SILVER Button Head

5/16" Washer

5/32" Allen (Hex) Key

M6x8mm SILVER Button Head

Board Backer Support

Wire Mgmt Molding

M6 Hex Nut

5/16 Hex Nut

3/16" Allen (Hex) Key

18x

M6 x 20mm Socket Cap Screw

Low Profile

5/32" Allen (Hex) Key

M6 x 20mm Socket Cap Screw

Low Profile

Machine Screw Insulator

Nylon Washer

5/32" Allen (Hex) Key

1/4" Washer

#12 x 2" Slotted Washer

Head Self Tapping Screw

12x

www.proliftstand.comwww.joromfg.com

For ease of installation, do this step while Pro-LIFT Wall Mount Hybrid is lying down

BE AWARE the mounting position of the Pencil Tray Adapter is dependant on projector/white

board combination

Be sure to use at least two fasteners per Pencil Tray Adapter

Be sure to NOT over tighten

ProLift WM Hybrid - WMHW ASSY Instructions : 0.003

M6 x 20mm Socket Cap Screw

Low Profile

Pro-LIFT WM Pencil Tray Adapter

Nylon Washer

Machine Screw Insulator

1

www.proliftstand.comwww.joromfg.com

ProLift WM Hybrid - WMHW ASSY Instructions : 0.003

Be sure to fasten Sacrificial Surface to at least three joists

Sacrificial Surface

(recommended

3/4" thick)

Recommended42

Recommended

Min.

13.75

Recommended

2

www.proliftstand.comwww.joromfg.com

Mark out the two screw locations to hang the Wall Mount Hybrid

Pre-drill pilot holes at the two locations

Be sure both points are horizontal and level

ProLift WM Hybrid - WMHW ASSY Instructions : 0.003

Slotted Hex Washer Head Screw

(recommended for8'ceiling)

Slotted Hex Washer Head Screw

Fasten the two Slotted Hex Washer Head Screws in the pre-drilled holes

Allow3/8"Min.distance

fromsacrificial surfaceto

hangWall MountHybrid

3

www.proliftstand.comwww.joromfg.com

ProLift WM Hybrid - WMHW ASSY Instructions : 0.003

Hang the Wall Mount Hybrid on the two screws

Be sure Wall Mount Hybrid is securely fastened to wall by tightening all screws

Slotted Hex Washer Head Screw

Add the remaining Slotted Hex Washer Head Screws

(3 per either side of Wall Mount Hybrid is recommended)

4

www.proliftstand.comwww.joromfg.com

WB Hanger

M6x8mm SILVER Button Head

Be sure to use the M6x8mm SILVER Button Head screws provided

Mount the WB Hanger

Be sure to NOT over tighten

BE AWARE the mounting position of the WB Hanger is dependant on projector/white

board combination

ProLift WM Hybrid - WMHW ASSY Instructions : 0.003

5

www.proliftstand.comwww.joromfg.com

M6 x 20mm Socket Cap Screw

Low Profile

Be sure to use the M6 x 20mm Socket Cap Screws provided

ProLift WM Hybrid - WMHW ASSY Instructions : 0.003

Mount the Turret Head

Be sure to NOT over tighten

6

www.proliftstand.comwww.joromfg.com

Este manual sirve para los siguientes modelos

Otros manuales de Rack y soporte de Pro-Lift

Pro-Lift

Pro-Lift G4U-LCD Manual de usuario

Pro-Lift

Pro-Lift T-6902 Instrucciones de uso

Pro-Lift

Pro-Lift G5ZL Manual de usuario

Pro-Lift

Pro-Lift T-3101 Instrucciones de uso

Pro-Lift

Pro-Lift G4U-WM Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario