Primes Cube M Manual de usuario

Revision 05/2018 EN

35,0(6

Cube M

Operating Manual

Translation of the original instructions

IMPORTANT!

READ CAREFULLY BEFORE USE.

KEEP FOR FUTURE USE.

35,0(6

Cube M

Revision 05/2018 EN

Table of contents

1 Basic safety instructions 6

2 Symbol explanation 8

3 Conditions at the installation site 9

4 Special information for measuring devices with rechargeable lithium ion

batteries 9

5 System description 10

5.1 Measuring principles ............................................................................ 10

6 Transportation 10

7 Installation/Removal 11

7.1 Prepare installation............................................................................... 11

7.2 Mounting position ................................................................................ 12

7.2.1 Align the Cube M with the alignment tool................................ 13

7.3 Install the Cube M................................................................................ 14

7.4 Remove the Cube M............................................................................ 14

8 Connections 15

8.1 External safety circuit (Laser interlock).................................................. 15

8.2 Micro-USB socket ............................................................................... 16

8.3 Bluetooth............................................................................................. 16

9 Control elements 17

9.1 On/Off button....................................................................................... 17

10 Display 17

10.1 Status messages ................................................................................. 18

10.2 Warning message ................................................................................ 18

10.3 Capacity of the rechargeable lithium ion battery ................................... 18

35,0(6

Cube M

Revision 05/2018 EN

11 Measuring and displaying with the Cube M 19

11.1 Safety instructions................................................................................ 19

11.2 Laser parameter setting ....................................................................... 20

11.2.1 Setting the laser rise time ....................................................... 20

11.2.2 Minimum energy per single measurement............................... 21

11.3 Single measurement ............................................................................ 22

11.4 Serial measurement ............................................................................. 23

11.5 Measurement with pulsed lasers .......................................................... 24

11.6 Reading off measuring values .............................................................. 24

12 Measurement and evaluation via software 25

12.1 Measurement and evaluation with the

LaserDiagnosticsSoftware LDS............................................................ 25

12.2 Measurement and evaluation with the PRIMES Cube App ................... 25

12.3 Functions and settings via the software................................................ 25

13 Maintenance and service 26

13.1 Exchanging the protective window....................................................... 26

13.1.1 Safety instructions.................................................................. 26

14 Measures for the product disposal 29

15 Technical data 30

16 Dimensions 32

17 Declaration of conformity 33

18 Appendix 34

18.1 System control (option) ........................................................................ 34

35,0(6

Cube M

Revision 05/2018 EN

1 Basic safety instructions

Intended use

The Cube M is used to measure power in the beam path of lasers. Please observe and

adhere to the speciﬁcations and limit values given in chapter15, „Technical data“, on

page30. Other forms of usage are improper. The information contained in this oper-

ating manual must be strictly observed to ensure proper use of the device.

Using the device for unspeciﬁed use is strictly prohibited by the manufacturer. By usage

other than intended the device can be damaged or destroyed. This poses an increased

health hazard up to fatal injuries. When operating the device, it must be ensured that

there are no potential hazards to human health.

The device itself does not emit any laser radiation. During the measurement, however,

the laser beam is guided onto the device which causes reﬂected radiation (laser class

4). That is why the applying safety regulations are to be observed and necessary pro-

tective measures need to be taken.

In measuring mode, the device’s safety circuit (interlock) must be connected with the

laser control.

Observing applicable safety regulations

Please observe valid national and international safety regulations as stipulated in ISO/

CEN/TR standards as well as in the IEC-60825-1 regulation, in ANSIZ136 “Laser

Safety Standards” and ANSI Z 136.1 “Safe Use of Lasers”, published by the American

National Standards Institute, and additional publications, such as the “Laser Safety

Basics”, the “LIA Laser Safety Guide”, the “Guide for the Selection of Laser Eye Protec-

tion” and the “Laser Safety Bulletin”, published by the Laser Institute of America, as well

as the “Guide of Control of Laser Hazards” by ACGIH.

Taking necessary safety measures

If there are people present within the danger zone of visible or invisible laser radiation,

for example near laser systems that are only partly covered, open beam guidance sys-

tems or laser processing areas, the following safety measures need to be taken:

• Connect the device’s safety circuit (interlock) to the laser control. Make sure that

the safety circuit (interlock) will turn off the laser properly in case of error.

• Please wear safety goggles adapted to the power, power density, laser wave

length and operating mode of the laser beam source in use.

35,0(6

Cube M

Revision 05/2018 EN

• Depending on the laser source, it may be necessary to wear suitable protective

clothing or protective gloves.

• Please protect yourself from direct laser radiation, scattered radiation as well as

from beams generated from laser radiation (e.g. by using appropriate shielding

walls or by weakening the radiation to a harmless level).

• Please use beam guidance- or beam absorber elements which do not emit any

hazardous particles as soon as they get in contact with laser radiation and which

resist the beam sufﬁciently.

• Please install safety switches and/or emergency safety mechanisms which enable

an immediate closure of the laser shutter.

• Please ensure a stable mounting of the device in order to prevent a relative motion

of the device to the beam axis of the laser and thus to reduce the risk of stray

radiation.

Employing qualiﬁed personnel

The device may only be operated by qualiﬁed personnel. The qualiﬁed personnel must

have been instructed in the installation and operation of the device and must have a

basic understanding of working with high-power lasers, beam guiding systems and

focusing units.

Conversions, modiﬁcations and repairs

The device must not be modiﬁed, neither constructionally nor safety-related, without

our explicit permission. The device must not be opened e.g. to carry out unauthorized

repairs. Modiﬁcations of any kind will result in the exclusion of our liability for resulting

damages.

Liability disclaimer

The manufacturer and the distributor of the measuring devices do not claim liability

for damages or injuries of any kind resulting from an improper use or handling of the

devices or the associated software. Neither the manufacturer nor the distributor can be

held liable by the buyer or the user for damages to people, material or ﬁnancial losses

due to a direct or indirect use of the measuring devices.

35,0(6

Cube M

Revision 05/2018 EN

2 Symbol explanation

The following symbols and signal words indicate possible residual risks:

DANGER

means that death or serious physical injuries will occur if necessary safety

precautions are not taken.

WARNING

means that death or serious physical injuries can occur if necessary safety

precautions are not taken.

CAUTION

means that a slight physical injury can occur if necessary safety precautions

are not taken.

NOTICE

means that property damages can occur if necessary safety precautions are

not taken.

The device itself or the packing bears the following symbols to indicate require-

ments and possible dangers:

Read and observe the operating instructions and safety guidelines before the

start-up!

35,0(6

Cube M

Revision 05/2018 EN

Further symbols that are not safety-related:

Here you can ﬁnd useful information and helpful hints.

With the CE marking the manufacturer guarantees that his product is in confor-

mity with the EC guidelines.

Call for observing (visual feedback from the device or the software).

X Call for action

3 Conditions at the installation site

The device must only be operated in a dry and dust free atmosphere. High levels of

humidity can lead to condensation, which can affect the operation of the device. This

also applies to high environmental dust exposure.

In industrial environments erroneous measurements may be triggered by strong elec-

tromagnetic ﬁelds. In this case we recommend EMC compliant shielding of the interlock

cable.

4 Special information for measuring devices with recharge-

able lithium ion batteries

The device is equipped with a lithium-ion battery. Note that this battery may ignite or

explode at high temperatures.

To operate the device, the ambient conditions must therefore be observed and adhered

to in accordance with the speciﬁcations in chapter15, „Technical data“, on page30.

The lithium-ion battery is permanently installed in the device. Do not open the device

to replace the lithium-ion battery, as damage to the battery may result in the escape of

harmful substances.

35,0(6

Cube M

Revision 05/2018 EN

5 System description

Laser beam

Display

On/Off button

Protective

window

Protective win-

dow holder

Laser interlock

Micro-USB socket

Fig. 5.1: System description of the Cube M

5.1 Measuring principles

The absorber of the calorimetric measurement system is irradiated by a laser for a short

period of time. The temperature difference of the absorber between start and ﬁnish

of the laser pulse is measured. From the increase in temperature, the microprocessor

based electronics is able to calculate laser power to a high degree of accuracy.

6 Transportation

NOTICE

Damaging/Destruction of the device

Hard impacts or dropping the device can damage the optical and electri-

cal components.

X Only transport the device in its original packaging.

Otros manuales para Cube M

Tabla de contenidos

Otros manuales de Instrumento de medición de Primes

Primes

Primes MSM Manual de usuario

Primes

Primes Cube L Manual de usuario

Primes

Primes PMC-BEO Manual de usuario

Primes

Primes BeamMonitor BM+ Series Manual de usuario

Primes

Primes PMT 01 Manual de usuario

Primes

Primes PocketMonitor Manual de usuario

Primes

Primes PowerMeasuringCassette PMC Manual de usuario

Primes

Primes Cube M Manual de usuario

Primes

Primes FocusMonitor-W Manual de usuario

Primes

Primes PowerLossMonitor PLM Series Manual de usuario

Primes

Primes LQM series Manual de usuario

Primes

Primes Cube L1 Manual de usuario

Primes

Primes LQM+ 20 Manual de usuario

Primes

Primes CUBE Manual de usuario

Primes

Primes MSM+ Manual de usuario

Primes

Primes PROFINET Manual de usuario

Primes

Primes BM+ series Manual de usuario

Primes

Primes PowerMonitor PM Series Manual de usuario

Primes

Primes PMC-C Manual de usuario

Primes

Primes MicroSpotMonitor-Compact MSM-C Manual de usuario

Primes

Primes Cube L1 Manual de usuario

Primes

Primes FocusMonitor FMW+ Manual de usuario

Primes

Primes Cube L1 Manual de usuario

Primes

Primes CUBE Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario