Primes Cube L Manual de usuario

Revision 04 EN - 03/2023

Cube L

LaserDiagnosticsSoftware LDS

Cube App

Original Instructions

35,0(6

Cube L

Revision 04 EN - 03/2023

IMPORTANT!

READ CAREFULLY BEFORE USE.

KEEP FOR FUTURE USE.

35,0(6

Cube L

Revision 04 EN - 03/2023

Table of contents

1 Basic safety notes 8

2 Icons and conventions 10

3 About this operating manual 12

4 Device description 13

4.1 Functional description .......................................................................... 13

4.2 Measuring principle.............................................................................. 13

4.3 Functions of the On/Off button............................................................. 14

4.4 Optical display ..................................................................................... 14

4.4.1 Status messages.................................................................... 14

4.4.2 Warning message................................................................... 15

4.5 Scope of delivery and optional accessories.......................................... 15

4.6 Important notes on the lithium-ion battery ............................................ 15

4.6.1 Charging the lithium-ion battery.............................................. 16

4.6.2 Storing the device with a permanently installed lithium-ion

battery.................................................................................... 16

4.6.3 Dangers to health and the environment in the event of damage

to the lithium-ion battery......................................................... 16

4.6.4 Charge status of the lithium-ion battery .................................. 16

5 Transport and storage 17

5.1 Warning messages .............................................................................. 17

5.2 Shipping the device with permanently installed battery......................... 17

6 Install LaserDiagnosticsSoftware LDS 18

7 Mounting 19

7.1 Conditions at the installation site .......................................................... 19

7.2 Installation in the laser system.............................................................. 19

7.2.1 Prepare mounting................................................................... 19

35,0(6

Cube L

Revision 04 EN - 03/2023

7.2.2 Possible mounting positions................................................... 19

7.2.3 Align the device...................................................................... 19

7.2.4 Mount the device.................................................................... 21

7.3 Removal from the laser system ............................................................ 23

8 Connections 24

8.1 Overview of connections...................................................................... 24

8.2 Micro-USB port.................................................................................... 24

8.2.1 PRIMES USB driver................................................................ 24

8.2.2 Install the USB driver manually ............................................... 25

8.3 Bluetooth®.......................................................................................... 26

8.3.1 Recommended Bluetooth®dongle and Bluetooth®

speciﬁcations ......................................................................... 26

8.3.2 Activate Bluetooth®on the PC (Windows® 10) ........................ 26

8.3.3 Connect device to PC via Bluetooth® (Windows® 10) .............. 26

8.4 Safety interlock .................................................................................... 27

9 Laser parameter setting 29

9.1 Setting the laser rise time..................................................................... 29

9.2 Maximum permissible power density.................................................... 30

9.3 Minimum and maximum energy input per measurement ...................... 31

9.4 Waiting times until the next measurement in serial measurements........ 32

9.5 Measurement with pulsed lasers .......................................................... 33

10 Measure 34

10.1 Warning messages .............................................................................. 34

10.2 Measuring with the CubeL .................................................................. 36

10.2.1 Start measurement................................................................. 36

10.2.2 Display of measurement results .............................................. 38

10.3 Measuring with the optional LaserDiagnosticsSoftware LDS ................ 39

10.3.1 Connect/disconnect the device with the LDS ......................... 39

35,0(6

Cube L

Revision 04 EN - 03/2023

10.3.2 Open toolbench Cube Measurement...................................... 41

10.3.3 Settings in the device control.................................................. 42

10.3.4 Start measurement................................................................. 46

10.3.5 Measuring results display ....................................................... 47

10.3.6 Delete measurements from the memory of the CubeL........... 52

10.4 Measuring with the optional Cube App................................................. 52

11 Troubleshooting 53

11.1 Messages in the LaserDiagnosticsSoftware LDS during measurement. 53

11.2 Connection failure with the LDS ........................................................... 55

11.3 Other errors ......................................................................................... 55

12 Maintenance and service 58

12.1 Maintenance intervals .......................................................................... 58

12.2 Cleaning .............................................................................................. 58

12.2.1 Cleaning the device surface.................................................... 58

12.2.2 Cleaning the protective window.............................................. 58

12.3 Exchanging the protective window on the device................................. 59

12.3.1 Warning messages................................................................. 60

12.3.2 Exchanging the protective window ......................................... 61

13 Measures for the product disposal 62

14 Declaration of conformity 63

15 Technical data 65

16 Dimensions 68

17 Appendix 70

A Diagrams for determining the max. laser power ................................... 70

B GNU GPL license notice ...................................................................... 71

35,0(6

Cube L

Revision 04 EN - 03/2023

PRIMES - the company

PRIMES is a manufacturer of measuring devices which are used to analyze laser

beams. These devices are employed for the diagnostics of high-power lasers rang-

ing from CO2-, ﬁber- and solid-state lasers to diode lasers. A wavelength range from

infrared through to near UV is covered, offering a wide variety of measuring devices to

determine the following beam parameters:

• Laser power

• Beam dimensions and position of an unfocused beam

• Beam dimensions and position of a focused beam

• Beam quality factor M²

Development, production and calibration of the measuring devices is performed at

PRIMES. This guarantees optimum quality, excellent service, and a short reaction time,

providing the basis for us to meet all of our customers’ requirements quickly and reliably.

PRIMES GmbH

Max-Planck-Str. 2

64319 Pfungstadt

Germany

Tel +49 6157 9878-0

[email protected]

www.primes.de

35,0(6

Cube L

Revision 04 EN - 03/2023

1 Basic safety notes

Intended use

The device has been designed exclusively for measurements in the beam of high-power

lasers.

Use for any other purpose is considered as not intended and is strictly prohibited.

Furthermore, intended use requires that you observe all information, instructions, safety

notes and warning messages in this operating manual. The speciﬁcations given in chap-

ter15 „Technical data“ on page65 apply. Any given limit values must be complied

with.

If not used as intended, the device or the system in which the device is installed can be

damaged or destroyed. In addition, there is an increased risk to health and life. Only use

the device in such a way that there is no risk of injury.

This operating manual is an integral part of the device and must be kept in the immedi-

ate vicinity of the place of use, accessible to personnel at all times.

Every person who is responsible for the installation, start-up or operation of the device

must have read and understood the operating manual and, in particular, the safety

instructions.

If you still have questions after reading this operating manual, please contact PRIMES or

your supplier for your own safety.

Observing applicable safety regulations

Observe the safety-relevant laws, guidelines, standards and regulations in the current

editions published by the state, standardization organizations, professional associations,

etc. In particular, observe the regulations on laser safety and comply with their require-

ments.

Necessary safety measures

The device measures direct laser radiation, but does not emit any radiation itself. How-

ever, during the measurement the laser beam is directed at the device. This produces

scattered or directed reﬂection of the laser beam (laser class 4). The reﬂected beam is

usually not visible.

35,0(6

Cube L

Revision 04 EN - 03/2023

Protect yourself from direct and reﬂected laser radiation while working with the device

by taking the following measures:

• Never leave the device unattended when taking measurements.

• Wear safety goggles adapted to the power, power density, laser wavelength and

operating mode of the laser beam source in use.

• Wear suitable protective clothing or protective gloves if necessary.

• If possible, also protect yourself from direct laser radiation and scattered radiation

by using separating protective devices that block or attenuate the radiation.

• If the device is moved from its aligned position, increased scattered or directed

reﬂection of the laser beam occurs during measuring operation. Mount the device

in such a way that it cannot be moved unintentionally, i.e. by bumping or pulling

the cables

• Connect the laser control’s safety interlock to the device. Check that the safety

interlock will switch off the laser properly in case of error.

• Install safety switches or emergency safety mechanisms that allow the laser to be

switched off immediately.

• Use suitable beam guidance and beam absorber elements which do not emit any

hazardous substances when irradiated.

Employing qualiﬁed personnel

The device may only be operated by qualiﬁed personnel. The qualiﬁed personnel must

have been instructed in the installation and operation of the device and must have a

basic understanding of working with high-power lasers, beam guiding systems and

focusing units.

Conversions and modiﬁcations

The device may not be modiﬁed in terms of design or safety without the explicit consent

of the manufacturer. The same applies to unauthorized opening, dismantling and repair.

The removal of covers is only permitted within the scope of the intended use.

Liability disclaimer

Manufacturer and distributor exclude any liability for damages and injuries which are

direct or indirect consequences of using the device not as intended or modifying the

device or the associated software without authorization.

35,0(6

Cube L

Revision 04 EN - 03/2023

2 Icons and conventions

Warning messages

The following icons and signal words indicate possible residual risks in the form of warn-

ings:

DANGER

Means that death or serious physical injuries will occur if necessary safety

precautions are not taken.

WARNING

Means that death or serious physical injuries can occur if necessary safety

precautions are not taken.

CAUTION

Means that a slight physical injury can occur if necessary safety precautions

are not taken.

NOTICE

Means that property damages can occur if necessary safety precautions are

not taken.

Product safety labels

The following icons are used on the device itself to indicate imperatives and possible

dangers:

Read and understand the operating manual before using the device!

Labeling according to WEEE directive:

The device must not be disposed of with household waste, but in a separate

WEEE collection in an environmentally friendly way.

Tabla de contenidos

Otros manuales de Instrumento de medición de Primes

Primes

Primes LQM series Manual de usuario

Primes

Primes MicroSpotMonitor-Compact MSM-C Manual de usuario

Primes

Primes MSM Manual de usuario

Primes

Primes LQM+ 20 Manual de usuario

Primes

Primes Cube M Manual de usuario

Primes

Primes BM+ series Manual de usuario

Primes

Primes PowerMonitor PM Series Manual de usuario

Primes

Primes MSM+ Manual de usuario

Primes

Primes PocketMonitor Manual de usuario

Primes

Primes Cube M Manual de usuario

Primes

Primes ScanFieldMonitor SFM Manual de usuario

Primes

Primes Cube L1 Manual de usuario

Primes

Primes PowerLossMonitor PLM Series Manual de usuario

Primes

Primes PMT 01 Manual de usuario

Primes

Primes PMC-C Manual de usuario

Primes

Primes Cube L1 Manual de usuario

Primes

Primes PowerMonitor PM Series Manual de usuario

Primes

Primes FocusMonitor FMW+ Manual de usuario

Primes

Primes PMC-BEO Manual de usuario

Primes

Primes BM+ 60 Manual de usuario

Primes

Primes PROFINET Manual de usuario

Primes

Primes PowerMeasuringCassette PMC Manual de usuario

Primes

Primes Cube L1 Manual de usuario

Primes

Primes CUBE Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario