Premier Mounts AM3 Manual de usuario

IN-AM3.R3

INSTALLATION MANUAL

AM3

Universal Swingout Arm

Premier Mounts

3130 E. Miraloma Avenue

Anaheim, CA 92806

Phone: (800) 368-9700 Fax: (800) 832-4888

mounts@mounts.com www.mounts.com

AM3

Page - 2 - Installation Manual

Table of Contents

Warning Statements ........................................................................................................................................- 3 -

Parts List ...........................................................................................................................................................- 4 -

Installation Tools ..............................................................................................................................................- 4 -

Mount Orientation ...........................................................................................................................................- 8 -

Mount Installation ...........................................................................................................................................- 9 -

Nose Piece Orientation ..................................................................................................................................- 10 -

Universal Mounting Bracket Assembly .......................................................................................................- 11 -

Attaching the Display ....................................................................................................................................- 12 -

Securing the Display ......................................................................................................................................- 13 -

Tilt Positioning ...............................................................................................................................................- 14 -

Cable Access Holes .........................................................................................................................................- 14 -

Technical Specifications ................................................................................................................................- 15 -

Warranty ........................................................................................................................................................- 16 -

Contact Premier Mounts ...............................................................................................................................- 16 -

Notes ................................................................................................................................................................- 16 -

AM3

Installation Manual Page - 3 -

Warning Statements

WARNING: PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY

PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS

DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS,

AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR

CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY

MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.

WARNING: THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING 160 LBS. IF NOT, THE WALL

STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED

SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE

ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN

DEATH.

WARNING: SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF

THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION

PROCEDURE TO PREVENT PERSONAL INJURY.

WARNING: PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS

SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS

MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE

INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE

REFERENCE.

Indicates that the power plug is to be

disconnected from the power outlet.

Contact Premier Mounts with any

questions - (800) 368-9700

Safety precautions must be taken at all

times.

Warning and Caution statements.

It is recommended that a maximum of 5/8” plaster board be used when mounting to wooden studs.

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in

damage to the flat panel display and/or damage to the mounting surface.

Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure

to do so may result in damage to the flat panel display and could increase the risk of fire.

At least two qualified people should perform the installation procedure. Injury and/or damage can result from dropping

or mishandling the flat panel display.

AM3

Page - 4 - Installation Manual

Parts List

NOTE: This wall mount is shipped with all proper installation hardware and components. Make sure that

none of these parts are missing and/or damaged before beginning installation. If there are parts

missing and/or damaged, please stop the installation and contact Premier Mounts

(800-368-9700).

Swingout Arm

(Qty 1) Griplates™ (Qty 8)

5/16” Flat

Washers (Qty 6)

5/16” x 3” Lag Bolts

(wooden studs only)

(Qty 6)

Universal

Mounting

Bracket (Qty 2) 14mm Deep Set

Socket (Qty 1)

Installation Tools

Phillips Head Screw Driver Soft Material/ Blanket 5/16” Socket and Wrench

Pencil Tape Measure Drill Gun

Level (Supplied) Thread Depth Indicator (Supplied)

¼” Drill Bit (Pilot Holes) 5/32” Allen Wrench (Supplied)

AM3

Installation Manual Page - 5 -

(Qty 8)

M6 x 20

(Qty 8)

(Qty 4)

(Qty 8)

M6 x 30

M6 x 45

(Qty 8)

M8 x 25

M8 x 20

(Qty 8)

M8 x 35

M8 x 30

(Qty 8)

M8 x 70

M8 x 45 (Qty 8)

M4 x 16

M4 x 25

M5 x 12

M5 x 20

M5 x 25

M5 x 16

M5 x 50

6 x 16

(Qty 8)

AM3

Page - 6 - Installation Manual

Nylon spacers and flat washers’ actual size

NOTE: The nylon spacers may be stacked to achieve proper spacing.

5/16" Flat washers

(metal)

1/4" Nylon spacers

1" Nylon spacers

(Qty 8)

(small)

(Qty 8)

1/2" Nylon spacers

1/4" Nylon spacers

(large)

(Qty 8)

(large)

(Qty 8)

Nylon sleeves

9/16" Nylon spacers

(Qty 8)

(Qty 12)

AM3

Installation Manual Page - 7 -

Thread Depth Indicator

1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat

panel to make sure the inserts measure the same full depth and mark it (Figure 1).

2. Locate the correct diameter screw for the thread insert. Compare your marking to the screws (supplied).

3. If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE this screw.

4. The screw length must not bypass the marking. Select another screw size (Figure 2 and 3), until you

find one that comes closest to your mark without going past.

Figure 1

Figure 2 Figure 3

Marking the depth

Thread depth

indicator

Thread insert

Inverted flat panel

display

Screw

Marking

Thread depth

indicator

Screw Thread depth

indicator

Marking

AM3

Page - 8 - Installation Manual

Mount Orientation

The AM3 Plasma Mount has the built-in capability of mounting with the swingout arm on either the left

or right-hand side.

WARNING: WHEN MOUNTING THE AM3, THE SIDE THAT THE SWINGOUT ARM IS LOCATED ON MUST

HAVE A LAG BOLT MOUNTED ON AT LEAST ONE SIDE (SEE FIGURE 1), TOP AND BOTTOM.

1. To change the mount orientation, choose the desired side that the mount will open to, left or right.

2. Once the side has been determined, attach the mount to the wall.

Figure 4

Left Side Orientation Right Side Orientation

Figure 5

ag Bolt

ooden Studs

AM3

Installation Manual Page - 9 -

Mount Installation

NOTE: Before proceeding with the mount installation, you should already have the mounting holes

pre-drilled. Please use the template (supplied) and follow the instructions.

NOTE: For ease of installation, it is recommended that two people perform the installation.

WARNING: WHEN MOUNTING THE AM3, THE SIDE THAT THE SWINGOUT ARM IS LOCATED ON MUST

HAVE A LAG BOLT MOUNTED ON AT LEAST ONE SIDE (SEE FIGURE 1, PAGE 9), TOP AND

BOTTOM.

1. After the holes have been pre-drilled, line up the mounting slot openings with the pre-drilled holes.

2. Insert four (4) 5/16” x 3” lag bolts and washers into the mounting holes and tighten (Figure 6).

3. Before tightening down the lag bolts, place a level (supplied) on the top rail and make sure that the

mount is level. Once the mount is level, tighten all of the lag bolts using a 5/16” deep set socket.

Figure 6

5/16” x 3” Lag Bolts and Washers

AM3

Page - 10 - Installation Manual

Nose Piece Orientation

Rotate Nose 180°

counter-clockwise

Left Hand Orientation Figure 7 Right Hand Orientation

Back Side of Nose Piece Front Side of Nose Piece

Figure 8

1. Once the mount has been oriented and mounted to the wall, remove the nose piece by removing the

tensions bolts.

NOTE: After loosening the tension bolts, be sure that the nose piece is held together tightly before

rotating.

2. Detach the nose piece assembly, rotate 180°, and place back onto the mount (Figure 7).

3. Slide the tension bolt back into the holes and attach the nuts from the backside of the nose assembly.

Tighten the tension bolts. (Figure 8).

Tension Bolts

Tabla de contenidos

Otros manuales de Rack y soporte de Premier Mounts

Premier Mounts

Premier Mounts SHLF-VC Manual de usuario

Premier Mounts

Premier Mounts EST100 Manual de usuario

Premier Mounts

Premier Mounts AM100 Manual de usuario

Premier Mounts

Premier Mounts CTM-MS1 Manual de usuario

Premier Mounts

Premier Mounts MVW55 Manual de usuario

Premier Mounts

Premier Mounts PRF Manual de usuario

Premier Mounts

Premier Mounts Convergent Series Manual de usuario

Premier Mounts

Premier Mounts Nesting Cart Series Manual de usuario

Premier Mounts

Premier Mounts PFM-32C1 Manual de usuario

Premier Mounts

Premier Mounts MVW463 Manual de usuario

Premier Mounts

Premier Mounts PBC- UMW Manual de usuario

Premier Mounts

Premier Mounts MM-CP15 Manual de usuario

Premier Mounts

Premier Mounts RTM Series Manual de usuario

Premier Mounts

Premier Mounts Multi-Monitor with table adapter MMT Manual de usuario

Premier Mounts

Premier Mounts Rotary RTM-S Manual de usuario

Premier Mounts

Premier Mounts AM50 Manual de usuario

Premier Mounts

Premier Mounts Convergent UNI-UPS-A CLD Manual de usuario

Premier Mounts

Premier Mounts AM225 Manual de usuario

Premier Mounts

Premier Mounts AST-2446 Manual de usuario

Premier Mounts

Premier Mounts PRC Manual de usuario

Premier Mounts

Premier Mounts PSD-TL Manual de usuario

Premier Mounts

Premier Mounts GB-PIPE1 Manual de usuario

Premier Mounts

Premier Mounts PRF Manual de usuario

Premier Mounts

Premier Mounts PP-FCTA-QL Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario