Poynting OMNI-297 Manual de usuario

Version 3.0

OMNI-297

User Guide

South Africa

Unit 4, N1 Industrial Park

Landmarks Ave

Samrand, 0157

South Africa

Tel: +27 12 657 0050

[email protected]

Europe

Kronstadler Straße 4,

81677 München

Germany

Tel: +49 89 2080 265 38

Mob.: +49 176 529 733 50

sales-europe@poynting.tech

2 PCL-A-OMNI-0297

Index

Version 3.0

Packing Check List

Introduction

Antenna Mounting

Precautions

Cable Routing

Safety

4 PCL-A-OMNI-0297

Packing Check List

Item

Description

Quantity

A-OMNI-0297

Antenna Only

Wall Knock-in

Screws

Pipe Clamp

SMA Grip Extender

Adhesive Disc

L-Bracket

M4 stainless steel

machine screw and

washer

Appearance of Components

Version 3.0

Antenna Unit

Wall Knock-in Screw

Pipe Clamp

SMA Grip Extender

Adhesive Disc

L-Bracket

M4 machine screw and M4 flat washers

6 PCL-A-OMNI-0297

Introduction

This User Guide provide information on the

installation instructions of the Omni-directional

antenna (A-OMNI-0297).

For both pole and wall mount options, attach

the L-Bracket to the antenna first using the

provided M4 screws and washers.

Antenna Configuration 1

Pole mount with L-Bracket and pipe

clamp

Exploded View

Version 3.0

Antenna Configuration 3

Surface mount with adhesive disc

Use adhesive disc as template for drilling a

cable hole

Antenna Configuration 2

Wall mount with L-Bracket and knock-in screws

8 PCL-A-OMNI-0297

Cable Routing

•

Survey the planned cable route and look

for any blocked passages. Consider

alternate routes to find the best available

path. Always keep the cables as short as

possible to make sure that minimum cable

losses are achieved.

•

Note: Take advantage of any existing

cable channels. e.g wiring conduits to

route the cables.

•

Avoid running cables through components

or sharp apertures that may cause

excessive chafing. Doing so may erode the

jacket and break signal continuity. Also,

avoid kinking, pinching, or twisting a cable

during a run.

•

Use cable ties to secure the antenna

cables.

•

Place the antenna at the highest point

and ensure that there aren't any

surrounding obstructions to the antenna.

•

In order to avoid communication

interference, ensure that the antenna is

placed at least 0.5m away from other

antennas and metal objects.

•

Avoid installing the antenna near a

chimney, as the smoke and soot emitted

by the chimney can obstruct the signal

level achieved by the antenna.

•

Install the antenna away from heat

sources and flammable gases.

Antenna Mounting Precautions

Version 3.0

•

The antenna may not be used as a climbing

or pulling device.

•

Considerations must be taken when

mounting the antenna that people do not

hang or pull on it.

•

Avoid using bits that are dull, bent or

damaged.

•

Be aware of where your fingers are in

relation to the drill bit when using the drilling

machine.

•

To stop the drilling machine, let the drill

chuck come to a complete stop on its own.

Never grasp the chuck in an attempt to stop

the drill bit.

•

Avoid installation while under the influence

of drugs, alcohol or medication.

•

Make sure that any loose-fitting jewellery or

clothing is secured and tie back long hair as

they can get caught in moving parts during

installation.

•

Avoid awkward hand positions where a

sudden slip could cause a hand to move

into the drill bit or cutting tool.

Safety

•

Never pull on the cable connectors;

pull only on the cable.

•

Tighten the connectors and ensure

that the cables don’t rattle loose.

When handling the antenna cables, it is

essential you follow these basic rules:

Tabla de contenidos

Otros manuales de Antena de Poynting

Poynting

Poynting OMNI-404 Manual de usuario

Poynting

Poynting PUCK-V1-W Manual de usuario

Poynting

Poynting Wavehunter Manual de usuario

Poynting

Poynting OMNI-493 Manual de usuario

Poynting

Poynting OMNI-292-V2 Manual de usuario

Poynting

Poynting OMNI-900 Manual de usuario

Poynting

Poynting PUCK-5 Manual de usuario

Poynting

Poynting OMNI-704 Manual de usuario

Poynting

Poynting OMNI-280 Manual de usuario

Poynting

Poynting RIPPLE Manual de usuario

Poynting

Poynting OMNI-214 Manual de usuario

Poynting

Poynting EPOYNT-4 Manual de usuario

Poynting

Poynting OMNI-900 Manual de usuario

Poynting

Poynting XPOL-2 Manual de usuario

Poynting

Poynting OMNI-296 Manual de usuario

Poynting

Poynting OMNI 400 Manual de usuario

Poynting

Poynting MIMO-4 Manual de usuario

Poynting

Poynting OMNI 291 Manual de usuario

Poynting

Poynting XPOL-1 Manual de usuario

Poynting

Poynting OMNI-403 Manual de usuario

Poynting

Poynting OMNI-700 Series Manual de usuario

Poynting

Poynting Moray Series Manual de usuario

Poynting

Poynting MIMO-3-V2 Manual de usuario

Poynting

Poynting OMNI-121 Manual de usuario

Manuales populares de Antena de otras marcas

Alfa Network

Alfa Network APA-L01 Manual de usuario

Naval

Naval PR-422CA Manual de usuario

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manual de usuario

TERK Technologies

TERK Technologies TV44 Manual de usuario

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manual de usuario

HP J8999A Manual de usuario

MobilSat

MobilSat MSP-S Manual de usuario

Steren

Steren ANT-UHF 13 Manual de usuario

Novatel

Novatel 600-G Manual de operación

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manual de usuario

TRENDnet

TRENDnet TEW-AO12O Manual de usuario

Radio Shack

Radio Shack 15-1837 Manual de usuario

CommScope

CommScope CMAX-OMFX-43M-I53 Manual de usuario

Ramsey Electronics

Ramsey Electronics DAP25 Manual de usuario

COBHAM

COBHAM SAILOR 800 VSAT Manual de uso y cuidado

Trango Systems

Trango Systems AD900-9 Manual de usuario

Steren

Steren ANT-100 Manual de usuario

Proxim

Proxim 5054-PA-23 Manual de usuario