Powerfix Profi 278296 Manual de usuario
MULTI-PURPOSE DETECTOR
IAN 278296
RAKENNEILMAISIN
Käyttö- ja turvaohjeet
MULTI-PURPOSE DETECTOR
Operation and Safety Notes
MULTIFUNKTIONSDETEKTOR
Bedienungs- und Sicherheitshinweise
D
AUGIAFUNKCIS DETEKTORIUS
Nurodymai dėl valdymo ir saugumo
MULTIFUNKTIONSDETEKTOR
Bruksanvisning och säkerhetsanvisningar
WIELOFUNKCYJNY DETEKTOR
Wskazówki dotyczące obsługi i bezpieczeństwa
GB Operation and Safety Notes Page 5
FI Käyttö- ja turvaohjeet Sivu 15
SE Bruksanvisning och säkerhetsanvisningar Sidan 25
PL Wskazówki dotyczące obsługi
i bezpieczeństwa Strona 35
LT Nurodymai dėl valdymo ir saugumo Puslapis 47
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 58
4
5
2
3
6
1
STUD METAL
DEEP AC
B
C
A7 8
14 13 12 11
10
9
5GB
Introduction.....................................Page 6
Intended use..........................................Page 6
Parts description....................................Page 6
Technical Data ......................................Page 7
Scope of delivery..................................Page 7
General safety
instructions.......................................Page 7
Safety Instructions
for Batteries ....................................Page 8
Before using....................................Page 9
Inserting/ changing the battery ...........Page 9
Switching on and off/
Automatic shut-down.............................Page 10
Start-up ...............................................Page 10
Tips on measurement..............Page 11
Cleaning and Care.....................Page 13
Disposal..............................................Page 13
Warranty...........................................Page 14
6 GB
Multi-Purpose Detector
Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. The instructions for use are part of the
product. They contain important information con-
cerning safety, use and disposal. Before using the
product, please familiarise yourself with all of the
safety information and instructions for use. Only
use the unit as described and for the specified ap-
plications. If you pass the product on to anyone
else, please ensure that you also pass on all the
documentation with it.
Intended use
This multi-purpose detector is designed for locating
metal or wooden beams, metal objects, voids and
electrical lines. This device is solely intended for
private use.
Parts description
1Measuring head
2Display
3Selection button (►)
4ON/ OFF button
5PUSH button („Measure“)
6Battery compartment
7Voltage sign ( )
8Intensity display ( )
9Battery symbol ( )
7GB
10 Selection arrow (▼)
11 AC voltage search (AC)
12 Void search (DEEP)
13 Metal search (METAL)
14 Beam search (STUD)
Technical Data
Operating voltage: 9V , max. 1mW
Battery type: 6LR61 (9V block)
Detector depths:
Beam (STUD): max. 19mm ± 3mm
Metal (METAL): max. 30mm ± 13mm
Voids (DEEP): max. 38mm ± 5mm
AC voltage (AC): max. 50mm (only with
lines which carry
230V~50 Hz)
Scope of delivery
1 Multi-Purpose Detector
1 9V block battery
1 Set of operating instructions
General safety
instructions
Before using the product, please familiarise
yourself with all of the safety information and in-
structions for use! When passing this product on
to others, please also include all the documents!
8 GB
Check the product for damage before use!
Never use a damaged product!
Do not expose the device to moisture! This
may damage it.
This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabili-
ties or lack of experience and knowledge if
they have been given supervision or instruc-
tion concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
Safety Instructions
for Batteries
DANGER TO LIFE! Batteries
are not intended for children. If accidentally
swallowed seek immediate medical attention!
CAUTION! EXPLOSION
HAZARD! Never recharge non-
rechargeable batteries, do not
short-circuit and/or open batteries!
Never throw batteries into fire or water!
Do not subject batteries to any mechanical
load!
Risk of battery leakage
In the event of a battery leak, immediately
remove it from the device to prevent damage!
Avoid contact with the skin, eyes and mucous
membranes! In the event of contact with bat-
tery acid, thoroughly flush the affected area
9GB
with plenty of clean water and seek immediate
medical attention!
Only use the same type of batteries! Do not
mix used and new batteries!
Avoid extreme environmental conditions and
temperatures, which could affect batteries,
e.g. above radiators/in direct sunlight.
Remove the batteries from the device if they
have not been used for a long period!
Risk of equipment damage
Only use the specified battery type!
When inserting the battery, ensure that it is
inserted the right way round! This is shown in
the battery compartment.
If necessary, clean the battery and device
contacts before inserting the battery!
Remove dead batteries from the device
immediately!
Before using
Before initial use, remove the protective film
from the device display 2and insert the
enclosed battery.
Inserting/changing
the battery
If the battery symbol 9appears in the
display, the inserted battery is almost drained
and must be replaced. Empty batteries can falsify
the measured result.
10 GB
To insert the battery proceed as follows:
Open the battery compartment cover on the
back of the device. You can remove the used
battery more easily with the aid of the mate-
rial strip, which is inside the battery compart-
ment 6. Just pull on the material strip.
Remove the used battery.
Plug the contacts of the 9V block battery on
the contacts of the profiled plug. Make sure
you fit the batteries the right way round. This
is specified by the profiled shape of the con-
tacts. Also ensure without fail that the mate-
rial strip is underneath the battery.
Insert the battery in the battery compartment
and close the cover again, so that it audibly
latches into place.
Switching on and off/
Automatic shut-down
Briefly press the ON/OFF button 4to
switch the device on or off.
Note: If you do not press any button for one
minute after the device has been switched on,
the device automatically switches off.
Start-up
Briefly press the ON/OFF button 4to
switch the device on (Fig. A). A selection of
menu points appears at the bottom of the
display 2:
(Fig. A)
The selection arrow (▼) 10 is over the menu
point for Beam search (STUD) 14 , when the
Otros manuales para 278296
7
Tabla de contenidos
Idiomas:
Otros manuales de Sensor de seguridad de Powerfix Profi
Powerfix Profi
Powerfix Profi HG00384B Manual de usuario
Powerfix Profi
Powerfix Profi KH 2927-2 Manual de usuario
Powerfix Profi
Powerfix Profi PMDL 5 B1 Manual de usuario
Powerfix Profi
Powerfix Profi 77287 Manual de usuario
Powerfix Profi
Powerfix Profi PMDL 5 B1 Manual de usuario
Powerfix Profi
Powerfix Profi KH 2927-2 Manual de usuario
Powerfix Profi
Powerfix Profi KH 3236 Manual de usuario
Powerfix Profi
Powerfix Profi 97003 Manual de usuario
Powerfix Profi
Powerfix Profi PMDL 5 B1 Manual de usuario
Powerfix Profi
Powerfix Profi 40111 Manual de usuario
Powerfix Profi
Powerfix Profi Z31385 Manual de usuario
Powerfix Profi
Powerfix Profi 298736 Manual de usuario
Powerfix Profi
Powerfix Profi IAN 40111 Manual de usuario
Powerfix Profi
Powerfix Profi 288019 Manual de usuario
Powerfix Profi
Powerfix Profi IAN 40111 Manual de usuario
Powerfix Profi
Powerfix Profi KHH 2927-2 Manual de usuario
Powerfix Profi
Powerfix Profi 288019 Manual de usuario
Powerfix Profi
Powerfix Profi 288019 Manual de usuario
Powerfix Profi
Powerfix Profi Z31385 Manual de usuario
Powerfix Profi
Powerfix Profi 285131 Manual de usuario
