PNI IP920W Manual de usuario

PNI IP920W

User manual

»Make sure the camera is securely xed and cannot fall.

»Security cameras should be positioned out of reach of children and pets.

»The camera is designed for indoor use and should not be used outdoor.

»Install your camera away from ovens, stoves and electrical equipment.

»Never immerse the camera in water, only use a soft damp cloth for cleaning.

»To protect your privacy, replace default password with a custom one.

»Don’t try to open the camera and repair it yourself, otherwise warranty is void.

SAFETY WARNINGS

1

Light sensor

Lens

IR LED

Mic

Full HD Two Way Audio Night Vision WiFi

Mobile View Pan & Tilt Video MicroSD slot

Reset

Network interface

microSD card slot

microUSB 5V

power input

Antenna

Features

2

Download App

Download CamHi app from Google Play or App Store

Camera Install

CamHi

3

Add Camera

1. Connect the power adapter to the camera.

2. Wait about 45 seconds. The camera will do a complete pan and tilt

rotation for calibration. After the camera return’s to default position you

can proceed to the next step.

Note: If the camera doesn’t start calibration, press and hold the reset

button for about 10 seconds. You will hear a startup sound.

3. Open the App Click

“Add Camera“

4. Click “Wireless Installation“

4

WiFi Connect

1Enter the wi password of the shown SSID.

3

Your phone will make a sound after you click “Yes“. Hold the phone near to the

camera’s microphone so it will recognize it. When it reaches about 50%, the

camera will make a sound, which means setup was successful.

Wait untill it reaches 100%, the UID of the camera will be shown. (image 1)

2Click “Yes“

(image 1)

5

Add Camera

5

4Enter the camera default password. (default password is: admin)

Click the camera and you will see the video feed. (image 2)

(image 2)

6

App Functions

Preset position:

Insert a number from 1 to 255. There are up to 255 preset

positions. The camera will rotate to the position you set when

inserting the correspondent number.

7

Camera Settings

1Change camera’s default password. The default password is “admin“.

Create a new password for your safety.

(image 3)

8

Camera Settings

3

4

2Recording Schedule:

File duration limit.

Enable or disable recording.

Schedule the recording.

Audio Setting:

Adjust camera’s microphone

input volume.

Adjust camera’s speaker

output volume.

SD card settings:

Check SD card status.

Format SD card.

Note: Power o󰀨 the camera

when inserting or removing

memory card.

9

Camera Settings

65System settings

Time Setting

Click “Sync with Phone time“

and the camera will set same

date and time as your phone,

or set it manually by clicking

“Device Time Zone“

Note:

If the camera won’t start calibration

after powering on, press and hold the

reset button for about 10 seconds.

You should hear a startup sound.

(image 4)

(image 4)

Tabla de contenidos

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario