Planet WNAP-7300 Manual de usuario

– 1 – – 2 –

– 3 – – 4 –

1. Product Package

WNAP-7300 x 1

Pole Mounting Ring x 2

AC Power Adapter & PoE Injector x 1

Quick Installation Guide (QIG) x 1

Product CD (User’s Manual & QIG included) x 1

Note

If any of them are not included or damaged,

please contact your local vendor for support.

2. Installation Precautions

1. Users MUST use a proper and well-installed surge arrestor

and grounding kit with WNAP-7300; otherwise, a random

lightening could easily cause fatal damage to WNAP-

7300. EMD (Lightning) DAMAGE IS NOT COVERED

UNDER WARRNTY.

2. Users MUST use the “AC Power Adapter & PoE Injector”

shipped in the box with the WNAP-7300.

Use of other options will cause damage to the WNAP-

7300.

3.Users MUST power off the WNAP-7300 rst before

connecting the external antenna to it; otherwise, damage

might be caused to the WNAP-7300 itself.

3. System Installation

1. The bottom of the WNAP-7300 is the movable cover.

Loosen the screw with a Phillips screwdriver. Grab the

coverandpullitoutasthegureshownbelow.

2. Plug a standard Ethernet cable into the RJ45 port labeled

“LAN 1”. Do not plug the cable into the RJ45 port labeled

“LAN 2”.

Note

Please refer to the User’s manual in CD-ROM

for more information about how to use the

secondary Ethernet port (labeled LAN 2).

3. Press the black PWR button beside the LAN 1 Ethernet

port.

4. Attach and fasten the removable cover to the bottom

of the WNAP-7300. When nished, you can check the

connection as the gure below. Be reminded, the UTP

wire distance toward your WNAP-7300 to the Ethernet

devices, such as Ethernet Switch, is 100 meters, the

passive POE injector can be in any point of this 100

meters UTP distance where there is a shell or protected

location.

5. Turn the WNAP-7300 over. Put the pole mounting ring

through the middle hole of the WNAP-7300.

Note

Unlock the pole mounting ring by a screw driver

before putting it through the WNAP-7300 as the

bottom right picture shows.

– 5 – – 6 –

6. Mount the WNAP-7300 steadily to the pole by locking the

pole mounting ring tightly.

7. Successful installation.

Note

Please refer to the User’s manual in CD-ROM

for more information about how to use the

external antenna with the SMA-type connector

to the WNAP-7300.

4. Conguration

Connect the WNAP-7300 with your PC by an Ethernet cable

plugging in LAN port of PoE injector in one side and in LAN

port of PC in the other side. Power on the WNAP-7300 by

PoE from PoE injector.

1. Assign a static IP address to your PC which should be in

the same network segment with the WNAP-7300. As the

default IP address of the WNAP-7300 is 192.168.1.1,

you may choose from 192.168.1.2 to 192.168.1.254.

Then click OK.

2. Open the web browser on your PC, key in the IP address

(192.168.1.1) of the WNAP-7300 in the address bar,

and then enter.

3. Now, you will see the log-in page of the WNAP-7300.

The default username and password are both “admin”.

Enter them and then click Login.

Note

Please refer to the User’s manual in CD-ROM

for more information about how to set each

mode after successful log-in.

Otros manuales para WNAP-7300

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Planet

Planet

Planet Wireless Access Point w/Bridge WAP-1963A Manual de usuario

Planet

Planet WBS-502AC Manual de usuario

Planet

Planet WAP-252N Manual de usuario

Planet

Planet WDAP-850AC Manual de usuario

Planet

Planet WNAP-1110 Manual de usuario

Planet

Planet WNAP-6350 Manual de usuario

Planet

Planet WNAP-3000PE Manual de usuario

Planet

Planet WDAP-3000AX Manual de usuario

Planet

Planet WDAP-C7200AC Manual de usuario

Planet

Planet WDAP-702AC Manual de usuario

Planet

Planet WNAP-7205 Manual de usuario

Planet

Planet WAP-4060PE Manual de usuario

Planet

Planet WDAP-C3000AX Manual de usuario

Planet

Planet WNAP-1110 Manual de usuario

Planet

Planet WAP-4060PE Manual de usuario

Planet

Planet 802.11n Wireless Access Point WNAP-1120 Manual de usuario

Planet

Planet WDAP-C1800AX Manual de usuario

Planet

Planet WNAP-C3220E Manual de usuario

Planet

Planet WAP-8000 Manual de usuario

Planet

Planet MAP-3100 Guía de inicio rápido

Planet

Planet WNAP-6305 Manual de usuario

Planet

Planet WAP-4030A Manual de usuario

Planet

Planet WDAP-C7200AC Manual de usuario

Planet

Planet WAP-4033 Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario