Planet IGS-20160HPT Manual de usuario
Industrial L3 16-Port 10/100/1000T 802.3at PoE+
2-Port 10/100/1000T + 2-Port 1G/2.5G SFP
Managed Ethernet Switch
IGS-20160HPT
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Wiring the Power Inputs.............................................................................. 5
3.1 Grounding the Device .......................................................................... 6
4. Terminal Setup ........................................................................................... 7
4.1 Logging on to the Console.................................................................... 8
4.2 ConguringIPAddress......................................................................... 8
5. Starting Web Management .........................................................................11
5.1 Logging in to the Industrial Managed PoE+ Switch ................................11
5.2 SavingConguration...........................................................................14
6. RecoveringBacktoDefaultConguration.....................................................15
7. Customer Support .....................................................................................16
3
1. Package Contents
Thank you for purchasing PLANET Industrial L3 16-Port 10/100/1000T 802.3at
PoE+ 2-Port 10/100/1000T + 2-Port 1G/2.5G SFP Managed Ethernet Switch. The
description of this model is as follows:
Model 10/100/1000TRJ45Ports 802.3atPoE+Ports 1G/2.5GSFPPorts
IGS-20160HPT 18 16 2
“Industrial Managed PoE+ Switch” mentioned in this Quick Installation Guide
refers to the above models.
Open the box of the Industrial Managed PoE+ Switch and carefully unpack it. The
box should contain the following items:
Item IGS-20160HPT
Quick Installation Guide
DIN-railKit
WallMountingKit
DB9toRJ45InterfaceRS232ConsoleCable
RJ45DustCap 19
SFPDustCap 2
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
zWorkstations running Windows XP/2003/2008/2012/Vista/7/8/10, MAC OS X or
later,Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zSerial Port Connection (Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
The above Workstations have been installed with terminal emulator, such as
HyperTerminalincludedinWindowsXP/2003,puttyorteraterm.
Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheRJ45consoleportoftheIndustrialManagedPoE+Switch.
zEthernet Port Connection
WorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser.
Note
Itis recommended touse Internet Explorer8.0 orabovetoaccess
the Industrial Managed PoE+ Switch. If the Web interface of the
Industrial Managed PoE+ Switch is not accessible, please turn off
theanti-virussoftwareorfirewallandthentryitagain.
5
3. Wiring the Power Inputs
The Upper Panel of the Industrial Managed PoE+ Switch indicates a DC inlet power
socket and consists of one terminal block connector within 6 contacts. Please follow
the steps below to insert the power wire.
1.Insert positive/negative DC power wires into Contacts 1 and 2 for Power 1, or
Contacts 5 and 6 for Power 2.
IGS-20160HPT:DC48-56V
DI
0DI
1DO
0DO
1GND GND
Fault
V1+ V2+
PWR2PWR1
Dual power input is required
for maximum PoE loading.
Refer to user’s manual for
more details.
Input: 48-56V , 7.5A max.
Max. fault loading: 24V, 1A
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-1: IGS-20160HPT Upper Panel
2.Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
123456
V1+ V1- V2+ V2-
Power 1 Power 2
(DC1) (DC2)
Model Positive (+) Pin Negative(-)Pin
IGS0-20160HPT Pin1/5 Pin2/6
6
Note
1.The wire gauge for the terminal block should be in the range
from 12 to 24 AWG.
2.Please check the wire AWG Ampere specification before
connectingPLANETIndustrialManagedSwitch.
3.1 Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device.
DI
0DI
1DO
0DO
1GND GND
Fault
V1+ V2+
PWR2PWR1
Dual power input is required
for maximum PoE loading.
Refer to user’s manual for
more details.
Input: 48-56V , 7.5A max.
Max. fault loading: 24V, 1A
1 2 3 4 5 6
1 2 3 4 5 6
Earth Ground
Note
EMD(Lightning)DAMAGEISNOTCONVEREDUNDERWARRANTY.
7
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ45 type serial (console) port of the Industrial
Managed PoE+ Switch. The console port of the Industrial Managed PoE+ Switch is
DCE already, so that you can connect the console port directly through PC without
the need of null modem.
PC/Workstation with
Terminal Emulation Software
RJ45 to DB9 RS232 Cable
Serial Port
Console Port
115200,N,8,1
IGS Industrial Managed Switch
Console
115200,N,8,1
P1 P2
Ring R.O.
Fault
I/O
Figure 4-1: Industrial Managed PoE+ Switch Console Connectivity
A terminal program is required to make the software connected to the Industrial
Managed PoE+ Switch. Windows' Hyper Terminal program may be a good choice.
TheHyperTerminalcanbeaccessedfromtheStart menu.
1. Click START, then Programs,Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port should be
conguredas:
zBaud:115200
zParity:None
zData Bits: 8
zStop Bits: 1
zFlowControl:None
Figure 4-2: COM Port Conguration
8
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the Industrial
Managed PoE+ Switch and the terminal will display “running testing procedures”.
Then, the following message asks to log in user name and password as shown
in Figure 4-3. Please enter the factory default user name “admin” and password
“admin”.
Username: admin
Password: admin
Figure 4-3: Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
description of the commands, please refer to the following chapters.
Note
1.For security reason, please change and memorize the new
password after this first setup.
2. Only accept command in lowercase letter under console inter-
face.
4.2 ConguringIPAddress
The Industrial Managed PoE+ Switch is shipped with default IP address shown
below:
IPAddress:192.168.0.100
Subnet Mask: 255.255.255.0
9
To check the current IP address or modify a new IP address for the Industrial
Managed PoE+ Switch, please use the procedure as follows:
DisplayofthecurrentIPAddress
1.Atthe“#” prompt, enter “show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressshowninFigure4-4.
Figure 4-4: IP Information Screen
CongurationoftheIPAddress
3.At the “#” prompt, enter the following command and press <Enter> as shown
inFigure4-5.
The previous command would apply the following settings for the Industrial
Managed PoE+ Switch.
IPAddress:192.168.1.100
Subnet Mask: 255.255.255.0
Figure 4-5: Conguring IP Address Screen
4. Repeat step 1 to check if the IP address has changed.
10
StoringCurrentSwitchConguration
5.Atthe“#” prompt, enter the following command and press <Enter>.
# copy running-cong startup-cong
Figure 4-6: Saving Current Conguration Command Screen
If the IP is successfully congured, the Industrial Managed PoE+ Switch will apply
the new IP address setting immediately. You can access the Web interface of the
Industrial Managed PoE+ Switch through the new IP address.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.
Tabla de contenidos
Otros manuales de Cambiar de Planet
Planet
Planet MGSW-004 Manual de usuario
Planet
Planet KVM-210 M Series Manual de usuario
Planet
Planet FSD-604HP Manual de usuario
Planet
Planet VC-412 Manual de usuario
Planet
Planet FGSD-1022P Manual de usuario
Planet
Planet GSD-1020 Manual de usuario
Planet
Planet GSW-1600HP Manual de usuario
Planet
Planet FGSD-1011HP Manual de usuario
Planet
Planet WGS-6325-8UP2X Manual de usuario
Planet
Planet IFGS-1822TF Manual de usuario
Planet
Planet WGS-4215 Series Manual de usuario
Planet
Planet IGS-4215-4P4T Manual de usuario
Planet
Planet WGS-5225-8MT Manual de usuario
Planet
Planet FSD-805S15 Manual de usuario
Planet
Planet GSD-504 Manual de usuario
Planet
Planet WGSW-52040 Manual de usuario
Planet
Planet MGSD-10080F Manual de usuario
Planet
Planet IGS-10020PT Manual de usuario
Planet
Planet GSD-804P Manual de usuario
Planet
Planet GSD-802S Manual de usuario
