Planet VIP-100T Manual de usuario

PLANET VoIP

Trademarks

Contentssubject to revise without prior notice.

PLANETis a registered trademark of PLANETTechnology

Corp. All other trademarks belong to their respective

owners.

FCCWarning

This equipment hasbeen tested and found to comply with

the limits for aClassAdigital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection againstharmfulinterferencewhen

the equipment isoperated in acommercial environment.

This equipment generates,uses, and can radiate radio

frequencyenergyand, ifnot installed and used in

accordancewith the Instruction manual, maycause

harmful interference to radio communications.Operation

of this equipment in aresidential area islikelyto cause

harmful interference in which case the You willbe required

to correct the interference at hisown expense.

CE-mark Warning

This is aClassAproduct. In adomesticenvironment, this

product maycauseradio interference, in which casethe

You maybe required to take adequate measures.

Revision

PLANETIP Phone VIP-100T

QUICK INSTALLATION GUIDE

For model: VIP-100T

Part No.: EMQ-VIP100TV1

VIP-100T QuickInstallation Guide

TABLE OF CONTENTS

1. OVERVIEW........................................................................5

1.1 BEFORE STARTUP ...........................................................6

1.2 PHYSICAL DETAILS ..........................................................6

1.2.1 Front view and keypad function:.............................7

1.2.2 Rear view................................................................9

2. BASIC CONFIGURATION..............................................10

2.1 INITIALIZE VIP-100T......................................................10

2.1.1 Start up..................................................................10

2.1.2 LCD configuration.................................................11

2.1.2.1System Configuration..............................................11

(i) Connect Configuration.................................................12

(ii) User Line Number.......................................................16

(iii) FirmwareUpdate........................................................16

(iv) HardwareTest...........................................................17

(v) Reboot........................................................................17

3. MAKING CALLS.............................................................18

3.1 IP ADDRESS CALL (P2P MODE):......................................18

3.1.1 P2Pmode Operation Steps:.................................19

3.2 GK MODE OPERATION STEPS:.......................................22

3.3 QUICK DIALEXAMPLE.....................................................25

3.3.1 Dial to local in peer to peer(P2P)mode...............25

3.3.2 Phone Bookweb configuration sample.................26

4. QUICK REFERENCE IN CD-ROMGUIDE.....................27

VIP-100T QuickInstallation Guide

1. OVERVIEW

Thankyou for purchasing PLANETIP Phone VIP-100T

(VIP-100T,in the following terms).You can nowease the cost of

long distance call yet still enjoythe tollvoice qualityvia Internet.

This Guide containsthe following information:

ProductOverview:

This chapter bringsyou briefintroduction to VIP-100T,and

illustratesmachine physical view, operation and

functionality.

Network Configuration:

This chapter illustrateshowto setup the Gatewaythrough

console interface and Web interface to your network.

Basic Configuration:

With console command, you will learn howto have the

command to the VIPand get the information fromit as

well.

Configuration Example:

This chaptershows you howto usethe default settings

start up your first call. And someexamplesshow you how

to cooperate with other devices.

Quick Reference:

Since there are lots ofcommands in the Gateway,we also

recommend you to learn more fromthe bundled CD-ROM

manual.

PLANET VoIP

1.1Before Startup

Beforeyour firsttimestartup, pleasecheck if the package

comeswith following items:

l VIP-100T

l Your manualCD

l QuickInstallation Guide

l RJ-45 cable

And later, you arerequired to familiaryour environment, your

TCP/IP networkand your phone systems.

1.2Physical Details

Key pad

Function

Key

LCD

Display

Speed

Dial

VIP-100T QuickInstallation Guide

1.2.1 Front viewand keypad function:

♦ C: Cancel and Clear

♦ çè : Move to left /previousand right/next.

♦ OK: PressOK to confirmthe modification.

♦ DirectLine (DL)Button 1 10: Speed dialing according

to phone bookdata 1-10.

(Please refer to LCD configuration [Phone AddressBook] )

♦ “+”and -key: Adjust voice volume in communication.

♦ SPEAKER: Speaking without picking up handset.

♦ MUTE:Mute the voice of MIC and let others can’thear

fromYou in communication.

♦ HOLD: To hold a call with H.450 function.

♦ SPEED:PressSPEEDand number (Phone bookindex)to

do speed dial according to phone bookdata.

♦ FORWARD:Forwardan incoming call to anotherIP

device byH.450 forwardfunction. (Please

refer to LCD configuration [Indicate

Forward Type])

♦ MESSAGE and its indicated LED light:When missing

the incoming calls, the message LED will be flashing. You

can knowthe information ofmisscall bypressing the

message button.

PLANET VoIP

♦ TRANSFER:

1. Transfer acall byH.450 transfer function. Press

TRANSFER button in communication and press

phone No. which You want to transferred to can

transferthiscall .

2. Change characters tobe capital or lowercase:

when press TRANSFER beforepressletterscan

switch type ofletters.

♦ REDIAL: Redialthe last outgoing call.

♦ Number 1 10, *and #:The function is as the sameas

the general phone set.

♦ Corresponding list ofkeypad and symbol:

Space”; ,”; .”; !”; 1”

A”; B”; C”; 2”

D”; E”; F”; 3”

G”; H”; I”; 4”

J”; K”; L”; 5”

M”; N”; O”; 6”

P”; Q”; R”; S”; 7”

T”; U”; V”; 8”

W”; X”; Y”; Z”; 9”

* -; ?”; *”

0”

_”; @”; #”

VIP-100T QuickInstallation Guide

1.2.2 Rear view

9V DC

9V DC Powerinput outlet

LAN RJ-45 connector, connected directlyto Switch/Hub

through straight CAT-5 cable.

PC RJ-45 connector, connected directly to the PC

through

straight CAT-5 cable

LED

Display

woLED indicated lights; LNK/ACTand 10/100 for

LAN port and PC port. When network

status is in

normal, LED of LINK/ACTwill be flashing; when

transmit rate is in 10 Mbps/100Mbps,LED of 100

will

light off/on.

PLANET VoIP

2. BASIC CONFIGURATION

This chapter shows you the starting point of VIP-100Tto be

integrated into yournetwork and/or Internet. Configuration steps

in this quick guide will befocused on keypad configuration. More

detail configuration, including keypad, web, and telnet

instructions will be illustrated in respectivechaptersin user’s

manual.

2.1Initialize VIP-100T

2.1.1 Start up

(a)Poweron, the LCD screen showsas below.

(b)Wait amoment until VIP-100Tfinishesboot program

initialization.

(c)You can see flashing greeting as below:

(d)Then VIP-100Twill comeinto standbymode: The main

LCD screen would be shown assimilar as following. The

P2Pwordmeans VIP-100Tis nowin Peer-to-PeerMode,

and when VIP-100Tisconnected to SNTP server, on LCD

will showcurrent time obtained fromSNTP server.

VIP-100T

Board Start Booting

SystemInitializing………..

VIP-100T

P2P 10:10:10 AM

VIP-100T QuickInstallation Guide

2.1.2 LCDconfiguration

Most functionsmaybe directlyconfigured via keypad

operations in VIP-100T.

VIP-100TLCD menu levels can be viewed below:

In this session, we will introducethe main configuration of

VIP-100Tforyou to quicklyand easilyto establishvoice

communication.

2.1.2.1 System Configuration

l Please Enter Password:

You’ll see thisprompt each time when you tryto configure or

modifyparametersin VIP-100T.It isrequired to keyin

password to entermachine configuration menu, parameters

under thismenu are important ones,pleaseconsult network

administratoror yourISPto ensure allthe parametersare

correct before proceeding anyfurther.

1. SystemConfiguration

2. User Line Number

3. Ring Configuration

4. Indicate Forward Type

5. Message Box

6. Phone AddressBook

7. PPPoEinformation

1. Connect Configurations

2. User Line Name

3. Firmware Update

4. Hardware Test

5. PPPoE configuration

6. Reboot

1. IP Address

2. SubnetMask

3. Gateway

4.Primary DNS

5.Secondary DNS

6. Gatekeeper

7. Second Gatekeeper

8. SNTP Configuration

9. Connection Mode

10.DHCP mode

11.TokenPassword

12.ManagementCenter

13.GRQ Option

14. Gatekeeper ID

1st Level

2ndLevel

3rdLevel

Otros manuales para VIP-100T

Tabla de contenidos

Otros manuales de Teléfono IP de Planet

Planet

Planet VIP-256PT Manual de usuario

Planet

Planet VIP-2140PT Manual de usuario

Planet

Planet VIP-6040PT Manual de usuario

Planet

Planet VIP-256T Manual de usuario

Planet

Planet VIP-254 Series Manual de usuario

Planet

Planet VIP-254NT Manual de usuario

Planet

Planet VIP-1010PT Manual de usuario

Planet

Planet VIP-5060PT Manual de usuario

Planet

Planet VIP-360PT Manual de usuario

Planet

Planet VIP-100PT Manual de usuario

Planet

Planet VIP-255PT Manual de usuario

Planet

Planet VIP-2020PT Manual de usuario

Planet

Planet VIP-100T Manual de usuario

Planet

Planet SIP IP PHONE VIP-154PT Manual de usuario

Planet

Planet VIP-36EXT Manual de usuario

Planet

Planet VIP-192 Manual de usuario

Planet

Planet VIP-150T Manual de usuario

Planet

Planet VIP-1140PT Manual de usuario

Planet

Planet VIP-361PE Manual de usuario

Planet

Planet VIP-8030NT Manual de usuario

Planet

Planet SIP IP Phone Manual de usuario

Planet

Planet VIP-103PT Manual de usuario

Planet

Planet VIP-351PT Manual de usuario

Planet

Planet VIP-152T Manual de usuario

Manuales populares de Teléfono IP de otras marcas

Alcatel

Alcatel 4028 Manual de usuario

Polycom

Polycom Polycom VVX 600 Manual de usuario

Polycom

Polycom SoundPoint IP 450 Manual de usuario

Cisco

Cisco SPA-500 Series Manual de usuario

Polycom

Polycom SoundPoint IP 650 Manual de usuario

Proximus

Proximus Maestro 3016 IP Manual de usuario

Fanvil

Fanvil X4 Manual de usuario

Cisco

Cisco 7962 Manual de usuario

Snom

Snom 320 Manual de usuario

Yealink

Yealink Yealink SIP-T46G Manual de usuario

Avaya

Avaya 4625SW Manual de usuario

Yealink

Yealink SIP-T52S Manual de usuario

Nortel

Nortel 1140E Manual de usuario

Nexotek

Nexotek NT-P500 Manual de usuario

Avaya

Avaya Integral 5 R3.0 Manual de usuario

GE 28320EE2 - Dect 6.0 InfoLink 2 Manual de usuario

Avaya

Avaya 4600 Series Manual de servicio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manual de usuario