Pickering 40-737 Manual de usuario

pickeringtest.com

Issue 4.5 July 2021

40-737 User Manual

PXI USB Data Communications Multiplexer Module

Page (II) USB DATA COMMUNICATIONS MULTIPLEXER MODULE 40-737

pickering

Page (II) REED RELAY MODULE 40-110/115/120/125

pickering

No part of this publication may be reproduced, transmitted, transcribed, translated or stored in any form, or by

any means without the written permission of Pickering Interfaces.

Technical details contained within this publication are subject to change without notice.

ISO 9001

Reg No. FM38792

Page (III)

USB DATA COMMUNICATIONS MULTIPLEXER MODULE 40-737

pickering

Page (III)

REED RELAY MODULE 40-110/115/120/125

pickering

TECHNICAL SUPPORT

For Technical Support please contact Pickering Interfaces either by phone, the website or via e-mail.

WARRANTY

All products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for a period of

three years, excluding programmable power supplies, from the date of delivery to the original purchaser. Any product found to be

defective within this period will, at the discretion of Pickering Interfaces be repaired or replaced.

Products serviced and repaired outside of the warranty period are warranted for ninety days.

Extended warranty and service are available. Please contact Pickering Interfaces by phone, the website or via e-mail.

ENVIRONMENTAL POLICY

Pickering Interfaces operates under an environmental management system similar to ISO 14001.

Pickering Interfaces strives to full all relevant environmental laws and regulations and reduce wastes and releases to the

environment. Pickering Interfaces aims to design and operate products in a way that protects the environment and the health and

safety of its employees, customers and the public. Pickering Interfaces endeavours to develop and manufacture products that can

be produced, distributed, used and recycled, or disposed of, in a safe and environmentally friendly manner.

Worldwide Technical Support and Product Information

pickeringtest.com

Germany

Tel: +49 89 125 953 160

E-mail: [email protected]

Sweden

Tel: +46 340-69 06 69

E-mail: [email protected]

USA

Tel: (West) +1 541 471 0700

Tel: (East) +1 781 897 1710

E-mail: [email protected]

Czech Republic

Tel: +420 558 987 613

E-mail: [email protected]

France

Tel +33 9 72 58 77 00

E-mail [email protected]

Pickering Interfaces Headquarters

Stephenson Road Clacton-on-Sea CO15 4NL United Kingdom

Tel: +44 (0)1255-687900

E-Mail: [email protected]

China

Tel: +86 4008 799 765

E-mail: [email protected]

Page (IV) USB DATA COMMUNICATIONS MULTIPLEXER MODULE 40-737

pickering

Page (IV) REED RELAY MODULE 40-110/115/120/125

pickering

MEANING / DESCRIPTION SYMBOL

PROTECTIVE EARTH (GROUND)

To identify any terminal which is intended for connection to an external conductor for

protection against electric shock in case of a fault, or the terminal of a protective earth

(ground) electrode.

DANGEROUS VOLTAGE

To indicate hazards arising from dangerous voltages.

WARNING / CAUTION

An appropriate safety instruction should be followed or caution to a potential hazard

exists.

Refer to the relevant instructions detailed within the product manual.

HEAVY

If this product is heavy reference should be made to the safety instructions for

provisions of lifting and moving.

STATIC SENSITIVE

To indicate that static sensitive devices are present and handling precautions should

be followed.

SAFETY SYMBOLS

PRODUCT SAFETY

The following safety symbols may be used on the product and throughout the product documentation.

Page (V)

USB DATA COMMUNICATIONS MULTIPLEXER MODULE 40-737

pickering

Technical Support and Warranty................................................III

Product Safety .............................................................................IV

Contents (this page)....................................................................V

Warnings and Cautions ..............................................................VII

Section 1

Technical Specication...............................................................1.1

Section 2

Technical Description .................................................................2.1

Functional Description..........................................................2.1

Section 3

Installation....................................................................................3.1

Pre Operation Checks...........................................................3.1

Hardware Installation ............................................................3.2

Software Installation .............................................................3.2

Testing Operation ..................................................................3.3

Section 4

Programming Guide....................................................................4.1

Programming Options for PXI Modules ..............................4.1

40-737 Card Architecture ......................................................4.2

Programming The 40-737......................................................4.2

Section 5

Connector Information................................................................5.1

Section 6

Trouble Shooting.........................................................................6.1

Section 7

Maintenance Information............................................................7.1

Switching System Test Tools ...............................................7.1

Relay Look-Up Table 8-Channel MUX..................................7.2

Relay Look-Up Table 16-Channel MUX................................7.4

CONTENTS

Page (VI) USB DATA COMMUNICATIONS MULTIPLEXER MODULE 40-737

pickering

THIS PAGE INTENTIONALLY BLANK

Page (VII)

USB DATA COMMUNICATIONS MULTIPLEXER MODULE 40-737

pickering

Page (VII)

2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

WARNINGS AND CAUTIONS

WARNING - HAZARDOUS ENVIRONMENTS SYMBOL

This product is not specically designed for use in hazardous environments, for example in explosive

atmospheres. If the product is to be used in hazardous environments we recommend that the user

ensures suitable protective measures are taken.

WARNING - DANGER OF ELECTRIC SHOCK SYMBOL

This module may contain hazardous voltages. Before removing the module from the rack remove all

supplies and disconnect user I/O signals.

Unused slots in the host chassis are populated with blanking plates to prevent access to user I/O

signals that may be present. Blanking panels are available to order from Pickering in a variety of

slot widths. If the product is not used in this manner for example by using an extender card then

additional care must be taken to avoid contact with exposed signals.

Not to be used in safety critical circuits, refer to the Pickering Interfaces’ terms & conditions of sale.

This module must not be used for the switching of Mains Circuits. For the switching of voltages up

to the module’s full specication, Secondary Circuit power supplies and the Device Under Test must

be fully isolated from the Mains Circuit and the safety earth.

The host chassis must be correctly installed and be connected to mains or factory safety ground,

please refer to your chassis installation manual.

Diagram Showing Separation Between The Mains Circuit and Secondary Circuit / DUT

For the purposes of this document, a Mains Circuit is an installation classied as Overvoltage

Category II up to 300V. Separation between the Secondary Circuit and Mains Circuit is achieved

by a transformer in which the primary windings are separated from the secondary windings by

reinforced insulation, double insulation, or a screen connected to the protective conductor terminal.

CAUTION - HANDLING OF ELECTROSTATIC-SENSITIVE DEVICES SYMBOL

Certain semiconductor devices used in this equipment are liable to damage due to static voltage.

Observe the following precautions when handling these devices in their unterminated state, or

sub-assemblies containing these devices:

1. Persons removing sub-assemblies from equipment using these devices must be earthed by a

wrist strap and a resistor at the point provided on the equipment.

2. Soldering irons used during the repair operations must be low voltage types with earthed tips and

isolated from the mains voltage by a double insulated transformer.

3. Outer clothing worn must be unable to generate static charges.

4. Printed Circuit Boards (PCBs) tted with these devices must be stored and transported in

anti-static bags.

PXI Switching

Module

Device

Under Test

Power

Supply

Power

Supply

Host Chassis

Secondary Circuit

Mains

Circuit

Mains

Circuit

Mains/Factory

Safety Ground

Page (VIII) USB DATA COMMUNICATIONS MULTIPLEXER MODULE 40-737

pickering

Page (VIII) 2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

CAUTION - PRODUCT DOCUMENTATION SYMBOL

Suitably qualied & trained users should ensure that the accompanying documentation is fully read

and understood before attempting to install or operate the product.

SAFETY INSTRUCTIONS

All cleaning and servicing requires the equipment to be isolated and disconnected from the power source and user I/O

signals (refer to the Maintenance Section).

• Appropriate manual handling procedures should be followed as dictated by the weight of the individual module or

the combined weight of the modules & chassis.

• Should a fault occur with the module or chassis, immediately isolate and disconnect the incoming power to the

chassis and the user I/O signals.

• Ensure the equipment is installed, operated and maintained by trained and authorised personnel.

• For suitably equipped products in the event of an emergency press the red “emergency stop” button situated on

the front of the unit.

Page 1.1

USB DATA COMMUNICATIONS MULTIPLEXER MODULE 40-737

pickering SECTION 1 - TECHNICAL SPECIFICATION

SECTION 1 - TECHNICAL SPECIFICATION

pickeringtest.com

PXI USB Data Communications MUX 40-737

ISSUE 5.0 JUL 2018

Selected Builds Supported by

eBIRST

40-737 versions with a 78-pin D-type connector are supported

by eBIRST switching system test tools. These simplify switching

system fault-ﬁnding by quickly testing the system and

graphically identifying the faulty relay.

For more information go to: pickeringtest.com/ebirst

yMultiplexer Designed For Switching USB Signals

yConﬁgured As An 8:1 or a 16:1 Multiplexer

yWide Differential Bandwidth

yControlled Differential Impedance

ySuitable For USB1 and USB2 Switching

Applications

y8:1 Version Uses Standard USB Type A and B

Signal Connectors

yInterface Board Available For 16:1 Version

Allowing Use of Standard USB Cables

yVISA, IVI & Kernel Drivers Supplied for Windows

ySupported by PXI or LXI Chassis

ySelected Builds Supported by

eBIRST

™

y3 Year Warranty

All Data

Paths Are

Differential

Pairs

8 off USB Type A Connectors

USB Type B Connector

Out1 Data

Out2 Data

Out3 Data

Out4 Data

Out5 Data

Out6 Data

Out7 Data

Out8 Data

Out1 Vbus

Out2 Vbus

Out3 Vbus

Out4 Vbus

Out5 Vbus

Out6 Vbus

Out7 Vbus

Out8 Vbus

Out1 GND

Out2 GND

Out3 GND

Out4 GND

Out5 GND

Out6 GND

Out7 GND

Out8 GND

In Vbus

In GND

In Data

Switching diagram for the

40-737-901 8:1 USB Multiplexer

(relays are shown in their default position)

The 40-737 is an 8:1 or 16:1 multiplexer for switching data signals

and is speciﬁcally designed for routing USB. The data paths are

2-pole differential pairs as deﬁned by the USB standard. The

multiplexer signal pairs have a controlled differential impedance

and the USB power paths have a common negative and a

switched positive. All paths are designed for minimum loss.

The common of the 8:1 multiplexer is via a front panel mounted

USB type B socket, and the eight channels are via USB type

A sockets. The 16:1 multiplexer has a male 78-pin D-type

connector for all signals and, using an interface board (40-965-

909), standard USB cables can be connected. Both multiplexer

versions are capable of switching USB1 or USB2.

The module is ideal for testing multiple USB devices, allowing

one target device to be selected from many. The design is

bi-directional allowing use as a multiplexer or de-multiplexer

with no impact on performance. Long life electro-mechanical

relays characterized for telephony are used.

Pickering’s Range of Data Comms Multiplexers

Model

No. Conﬁguration Application

40-735 Single 36 channel or Dual 18

channel, differential pair USB, RS232

40-736 Single 32, Dual 16, Quad 8

channel, differential pair

1Gb Ethernet, AFDX,

BroadR-Reach, LVDS,

USB, RS232

40-737 Single 8:1 or 16:1 differential

pair and power USB1, USB2

Page 1.2 USB DATA COMMUNICATIONS MULTIPLEXER MODULE 40-737

pickering

SECTION 1 - TECHNICAL SPECIFICATION

USB Data Comms MUX, 40-737

pickeringtest.com

Overview

Out9 Data

All Data

Paths Are

Differential

Pairs

Out10 Data

Out11 Data

Out12 Data

Out13 Data

Out14 Data

Out15 Data

Out16 Data

USB Data Channels (78-pin D-Type Connector)

Out1 Vbus

Out2 Vbus

Out3 Vbus

Out4 Vbus

Out5 Vbus

Out6 Vbus

Out7 Vbus

Out16 Vbus

Out1 Data

Out2 Data

Out3 Data

Out4 Data

Out5 Data

Out6 Data

Out7 Data

Out8 Data

In Data

(78-pin

D-Type

Connector)

Out8 Vbus

Out9 Vbus

Out10 Vbus

Out11 Vbus

Out12 Vbus

Out13 Vbus

Out14 Vbus

Out15 Vbus

In Vbus

USB Power Channels (78-pin D-Type Connector)

Out1 GND

Out2 GND

Out3 GND

Out4 GND

Out5 GND

Out6 GND

Out7 GND

Out16 GND

Out8 GND

Out9 GND

Out10 GND

Out11 GND

Out12 GND

Out13 GND

Out14 GND

Out15 GND

78-pin D-Type

Connector In GND

Switching diagram for the 40-737-001 16:1 USB Multiplexer,

relays are shown in their default position.

Tabla de contenidos

Otros manuales de Multiplexor de Pickering

Pickering

Pickering 40-670C Manual de usuario

Pickering

Pickering 40-657 Manual de usuario

Pickering

Pickering 40-666B Manual de usuario

Pickering

Pickering PXI 40-661 Manual de usuario

Pickering

Pickering SYSTEM 10 Manual de usuario

Pickering

Pickering 60-590 Manual de usuario

Pickering

Pickering 40-660A-001 Manual de usuario

Pickering

Pickering 40-682A Manual de usuario

Pickering

Pickering 40-675 Manual de usuario

Pickering

Pickering PCI 50-725 Manual de usuario

Pickering

Pickering 40-756 Manual de usuario

Pickering

Pickering LXI 50 Manual de usuario

Pickering

Pickering 40-683A Manual de usuario

Pickering

Pickering 40-652A Manual de usuario

Pickering

Pickering 40-614C Manual de usuario

Pickering

Pickering PXI 40-617 Manual de usuario

Pickering

Pickering 40-760 Manual de usuario

Pickering

Pickering PXI Power MUX BRIC 40-571A Manual de usuario

Pickering

Pickering 40-658 Manual de usuario

Pickering

Pickering LXI 60-555 Manual de usuario

Pickering

Pickering 40-615A Manual de usuario

Pickering

Pickering PXI Power MUX BRIC 40-571 Manual de usuario

Pickering

Pickering PXI Power MUX BRIC 40-571A Manual de usuario

Pickering

Pickering PXI 40-740 Manual de usuario

Manuales populares de Multiplexor de otras marcas

Campbell

Campbell AM416 Manual de usuario

Paradyne

Paradyne SIM2000 Manual de usuario

Panasonic

Panasonic WJFS616 - SWITCHER Manual de usuario

Lanex

Lanex TM-77 Manual de usuario

Bosch

Bosch VSS8394/01T Manual de usuario

Quark-Elec

Quark-Elec QK-A035 Manual de usuario

ADTRAN

ADTRAN Frameport 768 Manual de usuario

Elo TouchSystems

Elo TouchSystems E247 Manual de usuario

Paradyne

Paradyne Hotwire 8786 Manual de usuario

RFL Electronics

RFL Electronics 9508D UCC Manual de usuario

Miranda

Miranda AMX-101i Manual de instrucciones

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Manual de usuario

GE StoreSafe SDVR-10 Manual de usuario

American Fibertek

American Fibertek MTX-8410C Manual de usuario

ADC

ADC HiGain ELU-319 5E Manual de usuario

Paradyne

Paradyne Hotwire 8774 Manual de usuario

American Fibertek

American Fibertek MTX-8810C-SL Manual de usuario

Viessmann

Viessmann 5229 Manual de usuario