Pickering 40-630A Manual de usuario

pickeringtest.com

Issue 1.1 March 2020

40-630A/632A User Manual

PXI Single/Dual 16/24/32/48 Channel

Versatile Multiplexer Module

Page (II) VERSATILE MULTIPLEXER MODULE 40-630A/632A

pickering

Page (II) REED RELAY MODULE 40-110/115/120/125

pickering

No part of this publication may be reproduced, transmitted, transcribed, translated or stored in any form, or by

any means without the written permission of Pickering Interfaces.

Technical details contained within this publication are subject to change without notice.

ISO 9001

Reg No. FM38792

Page (III)

VERSATILE MULTIPLEXER MODULE 40-630A/632A

pickering

Page (III)

REED RELAY MODULE 40-110/115/120/125

pickering

TECHNICAL SUPPORT

For Technical Support please contact Pickering Interfaces either by phone, the website or via e-mail.

WARRANTY

All products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for a period of

three years, excluding programmable power supplies, from the date of delivery to the original purchaser. Any product found to be

defective within this period will, at the discretion of Pickering Interfaces be repaired or replaced.

Products serviced and repaired outside of the warranty period are warranted for ninety days.

Extended warranty and service are available. Please contact Pickering Interfaces by phone, the website or via e-mail.

ENVIRONMENTAL POLICY

Pickering Interfaces operates under an environmental management system similar to ISO 14001.

Pickering Interfaces strives to full all relevant environmental laws and regulations and reduce wastes and releases to the

environment. Pickering Interfaces aims to design and operate products in a way that protects the environment and the health and

safety of its employees, customers and the public. Pickering Interfaces endeavours to develop and manufacture products that can

be produced, distributed, used and recycled, or disposed of, in a safe and environmentally friendly manner.

Worldwide Technical Support and Product Information

pickeringtest.com

Germany

Tel: +49 89 125 953 160

E-mail: [email protected]

Sweden

Tel: +46 340-69 06 69

E-mail: [email protected]

USA

Tel: (West) +1 541 471 0700

Tel: (East) +1 781 897 1710

E-mail: [email protected]

Czech Republic

Tel: +420 558 987 613

E-mail: [email protected]

France

Tel +33 9 72 58 77 00

E-mail [email protected]

Pickering Interfaces Headquarters

Stephenson Road Clacton-on-Sea CO15 4NL United Kingdom

Tel: +44 (0)1255-687900

E-Mail: [email protected]

China

Tel: +86 4008 799 765

E-mail: [email protected]

Page (IV) VERSATILE MULTIPLEXER MODULE 40-630A/632A

pickering

Page (IV) REED RELAY MODULE 40-110/115/120/125

pickering

MEANING / DESCRIPTION SYMBOL

PROTECTIVE EARTH (GROUND)

To identify any terminal which is intended for connection to an external conductor for

protection against electric shock in case of a fault, or the terminal of a protective earth

(ground) electrode.

DANGEROUS VOLTAGE

To indicate hazards arising from dangerous voltages.

WARNING / CAUTION

An appropriate safety instruction should be followed or caution to a potential hazard

exists.

Refer to the relevant instructions detailed within the product manual.

HEAVY

If this product is heavy reference should be made to the safety instructions for

provisions of lifting and moving.

STATIC SENSITIVE

To indicate that static sensitive devices are present and handling precautions should

be followed.

SAFETY SYMBOLS

PRODUCT SAFETY

The following safety symbols may be used on the product and throughout the product documentation.

Page (V)

VERSATILE MULTIPLEXER MODULE 40-630A/632A

pickering

Technical Support and Warranty................................................III

Product Safety .............................................................................IV

Contents (this page)....................................................................V

Warnings and Cautions ..............................................................VII

Section 1

Technical Specication...............................................................1.1

Section 2

Technical Description .................................................................2.1

Functional Description..........................................................2.1

Section 3

Installation....................................................................................3.1

Pre Operation Checks...........................................................3.1

Hardware Installation ............................................................3.2

Software Installation .............................................................3.2

Testing Operation ..................................................................3.3

Section 4

Programming Guide....................................................................4.1

Programming Options For Pickering PXI Modules ............4.1

Module Architecture .............................................................4.2

Programming The Module ....................................................4.5

Section 5

Connector Information................................................................5.1

Section 6

Trouble Shooting.........................................................................6.1

Section 7

Maintenance Information............................................................7.1

Switching System Test Tools ...............................................7.1

Relay Lookup Tables.............................................................7.1

Component Layout................................................................7.4

CONTENTS

Page (VI) VERSATILE MULTIPLEXER MODULE 40-630A/632A

pickering

THIS PAGE INTENTIONALLY BLANK

Page (VII)

VERSATILE MULTIPLEXER MODULE 40-630A/632A

pickering

Page (VII)

2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

WARNINGS AND CAUTIONS

WARNING - HAZARDOUS ENVIRONMENTS SYMBOL

This product is not specically designed for use in hazardous environments, for example in explosive

atmospheres. If the product is to be used in hazardous environments we recommend that the user

ensures suitable protective measures are taken.

WARNING - DANGER OF ELECTRIC SHOCK SYMBOL

This module may contain hazardous voltages. Before removing the module from the rack remove all

supplies and disconnect user I/O signals.

Unused slots in the host chassis are populated with blanking plates to prevent access to user I/O

signals that may be present. Blanking panels are available to order from Pickering in a variety of

slot widths. If the product is not used in this manner for example by using an extender card then

additional care must be taken to avoid contact with exposed signals.

Not to be used in safety critical circuits, refer to the Pickering Interfaces’ terms & conditions of sale.

This module must not be used for the switching of Mains Circuits. For the switching of voltages up

to the module’s full specication, Secondary Circuit power supplies and the Device Under Test must

be fully isolated from the Mains Circuit and the safety earth.

The host chassis must be correctly installed and be connected to mains or factory safety ground,

please refer to your chassis installation manual.

Diagram Showing Separation Between The Mains Circuit and Secondary Circuit / DUT

For the purposes of this document, a Mains Circuit is an installation classied as Overvoltage

Category II up to 300V. Separation between the Secondary Circuit and Mains Circuit is achieved

by a transformer in which the primary windings are separated from the secondary windings by

reinforced insulation, double insulation, or a screen connected to the protective conductor terminal.

CAUTION - HANDLING OF ELECTROSTATIC-SENSITIVE DEVICES SYMBOL

Certain semiconductor devices used in this equipment are liable to damage due to static voltage.

Observe the following precautions when handling these devices in their unterminated state, or

sub-assemblies containing these devices:

1. Persons removing sub-assemblies from equipment using these devices must be earthed by a

wrist strap and a resistor at the point provided on the equipment.

2. Soldering irons used during the repair operations must be low voltage types with earthed tips and

isolated from the mains voltage by a double insulated transformer.

3. Outer clothing worn must be unable to generate static charges.

4. Printed Circuit Boards (PCBs) tted with these devices must be stored and transported in

anti-static bags.

PXI Switching

Module

Device

Under Test

Power

Supply

Power

Supply

Host Chassis

Secondary Circuit

Mains

Circuit

Mains

Circuit

Mains/Factory

Safety Ground

Page (VIII) VERSATILE MULTIPLEXER MODULE 40-630A/632A

pickering

Page (VIII) 2 AMP 1-POLE UHD MATRIX MODULES 40-575 / 576 / 577 / 578 / 579

pickering

CAUTION - PRODUCT DOCUMENTATION SYMBOL

Suitably qualied & trained users should ensure that the accompanying documentation is fully read

and understood before attempting to install or operate the product.

SAFETY INSTRUCTIONS

All cleaning and servicing requires the equipment to be isolated and disconnected from the power source and user I/O

signals (refer to the Maintenance Section).

• Appropriate manual handling procedures should be followed as dictated by the weight of the individual module or

the combined weight of the modules & chassis.

• Should a fault occur with the module or chassis, immediately isolate and disconnect the incoming power to the

chassis and the user I/O signals.

• Ensure the equipment is installed, operated and maintained by trained and authorised personnel.

• For suitably equipped products in the event of an emergency press the red “emergency stop” button situated on

the front of the unit.

Page 1.1

VERSATILE MULTIPLEXER MODULE 40-630A/632A

pickering SECTION 1 - TECHNICAL SPECIFICATION

SECTION 1 - TECHNICAL SPECIFICATION

pickeringtest.com

PXI Dual 16/24 Channel Multiplexer 40-630A/632A

ISSUE 1.1 MAR 2020

Supported by

eBIRST

eBIRST switching system test tools simplify fault-nding by quickly

testing the system and graphically identifying the faulty relay.

For more information go to: pickeringtest.com/ebirst

• Versatile Multiplexer With Single & Dual Operation

• 40-630A Dual 16-Channel 2-Pole Multiplexer,

Available In 4 Other Conﬁgurations

• 40-632A Dual 24-Channel 1-Pole Multiplexer,

Available In 2 Other Conﬁgurations

• 1, 2 & 4-Pole Switching Formats

• Uses High Reliability Pickering Reed Relays

• Fast Operating Speed 500μs Typical per Relay

• Switch up to 150V, 1.2A with 20W Max Power

• Automatic Isolation Switches Reduce Capacitive

Loading in Large Systems

• VISA, IVI & Kernel Drivers Supplied for Windows

• Supported by PXI or LXI Chassis

• Supported by

eBIRST

™

• 3 Year Warranty

Common

Single: 16, 32 or

64-Channel

MUX Bank 1

MUX Bank 2

Common

Dual: 16 or 32-Channel

Common

Single: 24 or

48-Channel

MUX Bank 1

MUX Bank 2

Common

Dual: 24-Channel

Overview of 40-630A/632A Multiplexer Conﬁgurations

(see overleaf for detailed diagrams)

The 40-630A/632A general purpose multiplexer modules feature a

wide range of switching congurations. They are based on 1-pole

or 2-pole reed relays and typical applications include signal routing

in ATE and data acquisition systems. User connections are made

via a front panel 68-pin socket.

The 40-630A/632A can be operated as conventional multiplexers

with break-before-make action when a new channel is selected.

Alternatively, product variants can be supplied that allow multiple

channels to be simultaneously selected.

The 630A/632A channel selection congurations have been revised

from the 40-630/632. The 40-630A/632A defaults to single channel

selection with the multiple channel selection variant dened by use

of a sufx.

Automatic isolation switching (see diagrams overleaf) connects

only the currently active multiplexer bank to the common terminal.

This minimizes capacitive loading and leakage current in large

multiplexer systems. Larger multiplexers may be constructed by

daisy chaining the common signals from multiple modules.

Automatic isolation switching only applies to single channel

selection mode, for versions with multi channel selection, the

isolation relays are controlled separately from the channel relays.

To prolong contact life of the isolation relays it is strongly advised

that they are cold switched.

Page 1.2 VERSATILE MULTIPLEXER MODULE 40-630A/632A

pickering

SECTION 1 - TECHNICAL SPECIFICATION

Dual 16/24 Channel MUX – 40-630A/632A

pickeringtest.com

Overview

Com

Isolation

Switch

40-630A-022-64/1

Single 64-Channel 1-Pole MUX

40-630A-022-32/2

Single 32-Channel 2-Pole MUX

1.1

2.1

Com 1

16.1

Isolation

Switch

1.2

2.2

Com 2

16.2

1.3

2.3

Com 3

16.3

1.4

2.4

Com 4

16.4

1.1

2.1

Com 1

16.1

Isolation

Switch

1.2

2.2

Com 2

16.2

1.1

2.1

Com 1

16.1

Isolation

Switch

1.2

2.2

Com 2

16.2

BANK 1

BANK 2

40-630A-022-D/32/1

Dual 32-Channel 1-Pole MUX

Com

Isolation

Switch

Com

Isolation

Switch

BANK 1

BANK 2

40-630A-022-16/4

Single 16-Channel 4-Pole MUX

40-630A-022-D/16/2

Dual 16-Channel 2-Pole MUX

40-630A-022 Multiplexer

Conﬁguration Schematics

Com

1.1

2.1

Com 1

24.1

1.2

2.2

Com 2

24.2

40-632A-021-D/24/1

Dual 24-Channel 1-Pole MUX

Com

BANK 1

BANK 2

40-632A-021-48/1

Single 48-Channel 1-Pole MUX

40-632A-021-24/2

Single 24-Channel 2-Pole MUX

40-632A-021 Multiplexer Conﬁguration Schematics

1.1

2.1

Com 1

32.1

Isolation

Switch

1.2

2.2

Com 2

32.2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Multiplexor de Pickering

Pickering

Pickering 40-761 Series Manual de usuario

Pickering

Pickering PXI 40-882B Manual de usuario

Pickering

Pickering 20-745 Manual de usuario

Pickering

Pickering 40-681 Manual de usuario

Pickering

Pickering 40-570A Manual de usuario

Pickering

Pickering 40-614 Manual de usuario

Pickering

Pickering 40-681A Manual de usuario

Pickering

Pickering 40-850 Manual de usuario

Pickering

Pickering 4-788 Series Manual de usuario

Pickering

Pickering PXI 40-635A Manual de usuario

Pickering

Pickering 42-204 Manual de usuario

Pickering

Pickering PCI 50-670 Manual de usuario

Pickering

Pickering 40-613 Manual de usuario

Pickering

Pickering PXI 40-661 Manual de usuario

Pickering

Pickering PXI 40-660 Manual de usuario

Pickering

Pickering 40-881B-001 Manual de usuario

Pickering

Pickering 40-682A Manual de usuario

Pickering

Pickering 40-657 Manual de usuario

Pickering

Pickering PXI 40-850A Manual de usuario

Pickering

Pickering PXI 40-785B Manual de usuario

Pickering

Pickering 40-655A Manual de usuario

Pickering

Pickering PCI 50-725 Manual de usuario

Pickering

Pickering 40-683A Manual de usuario

Pickering

Pickering 60-850 Manual de usuario

Manuales populares de Multiplexor de otras marcas

Campbell

Campbell AM416 Manual de usuario

Paradyne

Paradyne SIM2000 Manual de usuario

Panasonic

Panasonic WJFS616 - SWITCHER Manual de usuario

Lanex

Lanex TM-77 Manual de usuario

Bosch

Bosch VSS8394/01T Manual de usuario

Quark-Elec

Quark-Elec QK-A035 Manual de usuario

ADTRAN

ADTRAN Frameport 768 Manual de usuario

Elo TouchSystems

Elo TouchSystems E247 Manual de usuario

Paradyne

Paradyne Hotwire 8786 Manual de usuario

RFL Electronics

RFL Electronics 9508D UCC Manual de usuario

Miranda

Miranda AMX-101i Manual de instrucciones

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Manual de usuario

GE StoreSafe SDVR-10 Manual de usuario

American Fibertek

American Fibertek MTX-8410C Manual de usuario

ADC

ADC HiGain ELU-319 5E Manual de usuario

Paradyne

Paradyne Hotwire 8774 Manual de usuario

American Fibertek

American Fibertek MTX-8810C-SL Manual de usuario

Viessmann

Viessmann 5229 Manual de usuario