Phonak SDS 4.0 Fit & Go Instrucciones de montaje
SDS 4.0 Tips and Tricks
2
Important information 3
SDS 4.0 Fit and Go Box overview 4
Selecting the receiver length 5
Choosing the correct earpiece for the receiver 6
Attaching / removing the retention to /from the receiver 7
Attaching the dome to the receiver 8
Attaching the SlimTip to the receiver 9
Removing the SlimTipfrom the receiver 10
How to exchange the receiver 11
Maintenance of domes and custom ear pieces 12
CeruShieldTM Disk - wax protection system for SDS 4.0 receivers 13
Content
3
Important information
Hearing instruments should not be fitted with domes/wax
protection system when used by clients with perforated
eardrums, inflamed ear canals or otherwise exposed middle
ear cavities. In these cases, we recommend the use of a
custom earpiece.
In the unlikely case that any part of the system remains in
the ear canal, it is strongly recommended to consult a
medical specialist for safe removal.
•The dome should be changed every three months or when it
becomes stiff or brittle. This is to prevent the dome from
detaching from the receiver sound outlet during insertion
into or removal from the ear.
•Changes or modifications made to this equipment not
expressly approved by Phonak are not allowed.
Thank you for choosing a Phonak Receiver-In-Canal (RIC)
product, designed to provide comfortable, flexible fittings for
your clients.
These assembly instructions provide you with a straight-forward
approach to fitting Phonak RIC hearing instruments for long-
term satisfaction.
Please note that all SDS 4.0 components are
only compatible with Marvel Audéo devices.
4
SDS 4.0 Fit and Go Box overview
S Receiver
OR 054-0778
OL 054-0777
S Receiver
1R 054-0780
1L 054-0779
S Receiver
2R 054-0782
2L 054-0781
S Receiver
3R 054-0784
3L 054-0783
CeruShieldTM Disk
098-0445
M Receiver
OR 054-0802
OL 054-0801
M Receiver
1R 054-0804
1L 054-0803
M Receiver
2R 054-0806
2L 054-0805
M Receiver
3R 054-0808
3L 054-0807
P Receiver
OR 054-0813
OL 054-0812
Retention S Receiver
004-8596-001
Retention M Receiver
004-8597-001
Retention P Receiver
004-8623-001
Vented dome S
054-0809 Measurement tool for cable length
026-0697
Receiver Handling Tool for SlimTips 4.0
026-1119
Vented dome M
054-0810 Pin removal tool
002-0404-1
Vented dome L
054-0811
Power dome S
054-0820
Power dome M
054-0821
Power dome L
054-0822
P Receiver
1R 054-0815
1L 054-0814
P Receiver
2R 054-0817
2L 054-0816
P Receiver
3R 054-0819
3L 054-0818
Cap dome
054-0788
Open dome S
054-0785
Open dome M
054-0786
Open dome L
054-0787
5
1. Position your head at the same horizontal level as the client’s
head so you are looking straight into the client’s ear. (a)
2. Hold the measurement tool with the appropriate blue or red
color code marking so your thumb is placed on the colored
area. (b)
3. Place the measurement tool on the top of the ear. Keep the
lines on the measurement tool horizontal. (b)
4. Choose the number (0, 1, 2, or 3) on the measurement tool
which is closest to the top of the opening of the ear canal.
In this example, 0 would be the most accurate choice. (c)
5. For binaural fittings, repeat process on the opposite ear.
Note:
It is important to measure both ears for a binaural fitting since right and left
ear sizes can vary and thus, require different receiver lengths.
0
1
2
3
b
a
c
right left
Selecting the receiver length
6
Dome size
Perform an otoscopic examination of your client’s ear canal. Based on the examination,
choose a dome size diameter and length suitable for the ear canal. The dome should fit
snugly and comfortably into the opening of the client’s ear canal, shown in the figure,
and help to retain the receiver inside.
*There are no coupling instructions for cShell as it is pre-assembled. Receiver with cShell can only be exchanged by manufacturer.
Choosing the correct earpiece for the receiver
Domes Custom ear pieces
Cap Open Vented Power SlimTip cShell*
• Instant fit
• Open fit
• One size only
• Instant fit
• Open fit
• Sizes S, M, L
• Instant fit
• Semi-occluded fit
• Wider fitting range
than Open dome
• Sizes S, M, L
• Instant fit
• Occluded fit
• Expanded low
frequency response
• Sizes S, M, L
• Custom fit
• Choice of venting
• Impression required
• SlimTip available in Acrylic, Silicone
and Titanium material
• cShell available in Acrylic only
7
Removing the retention
We recommend using the retention for a more
stable positioning of the receiver in the ear canal.
It can easily be pre-shaped (to suit the concha) by
sliding it over a sharp edge.
Attaching / removing the retention to / from the receiver
1. Hold receiver rmly with one hand.
2. Slide the retention over the
receiver spout until you feel it
click into place. The receiver name
should still be clearly visible.
1. Hold the receiver rmly in one
hand with the receiver name (e.g.
0M) facing upwards. With the
other hand hold the retention at
the base of the lament.
2. Slide the retention forwards over
the receiver spout.
Attaching the retention
8
Attaching the dome to the receiver
1. Hold the receiver in one hand and the
dome in the other hand.
2. Slide the dome over the receiver spout.
You will feel the dome “click” into place.
In very rare cases, the dome can remain in the
ear canal when removing the receiver from the
ear. In the unlikely case that any parts remain in
the ear canal, it is strongly recommended to see
a medical specialist for safe removal.
9
Attaching the SlimTip to the receiver
1. Slide the receiver into the sleeve of the handling
tool, ensure the receiver label (e.g. 0M) is visible and
facing upwards, and the receiver cable is extending
upwards. Note that the tool has three dierent
sized sleeves to accommodate S, M and P receiver
housings.
3. Gently insert the receiver spout into the SlimTip Link
until you feel it click into place securely.
2. Hold the SlimTip rmly with one hand, with the other
hand insert the receiver using the handling tool.
Note that the printed label on the SlimTip faces
the opposite direction to the receiver label.
4. Gently slide the tool away from the receiver.
Tabla de contenidos
Otros manuales de Audífono de Phonak
Phonak
Phonak Audeo Yes Manual de usuario
Phonak
Phonak MAXX Manual de usuario
Phonak
Phonak inspiro Manual de usuario
Phonak
Phonak Naida Link M Manual de usuario
Phonak
Phonak iSense Micro Manual de usuario
Phonak
Phonak AUDEO B-R B90 Manual de usuario
Phonak
Phonak MSF0001 MicroField Manual de usuario
Phonak
Phonak Naida B Series Manual de usuario
Phonak
Phonak Ambra Manual de usuario
Phonak
Phonak Naida UltraPower Manual de usuario
Phonak
Phonak roger Manual de usuario
Phonak
Phonak certena bte Manual de usuario
Phonak
Phonak Roger Select Guía de seguridad
Phonak
Phonak Naida S Manual de usuario
Phonak
Phonak myPilot Manual de usuario
Phonak
Phonak Roger AudioHub Manual de usuario
Phonak
Phonak microSavia Art Manual de usuario
Phonak
Phonak Roger Pen Manual de usuario
Phonak
Phonak iCube II Manual de usuario
Phonak
Phonak Virto V90-10 O Manual de usuario
Manuales populares de Audífono de otras marcas
Williams Sound
Williams Sound SoundPlus WIR 237 Guía
Oticon Medical
Oticon Medical Ponto SoundConnector Manual de usuario
Siemens
Siemens Life micon Manual de usuario
Starkey
Starkey Destiny Manual de usuario
Audicus
Audicus The Icon Manual de usuario
Advanced Bionics
Advanced Bionics Slim HP Standard Manual de usuario
