Phoenix Gold IAmp Manual de usuario

www.PHOENIXGOLD.com

Phoenix Gold iSeries

USER MANUAL

iAMPUSER

Phoenix Gold iSeries

www.PHOENIXGOLD.com

Table of Contents

Section Pages

Overview 3

Touch Screen LCD Controller

1. Home Screen 3

2. Subwoofer Level Screen 4

3. Factory EQ Preset Screen 4

4. User EQ Preset Screen 5

5. Listening Position Screen 5

6. Tools Menu 6-7

PC Software

1. Connecting the PAC-UP to the Amp/PC 8

2. Setting the Gains/Crossover Point 8

3. Setting and Saving the EQ Presets 9

4. Listening Position 9

5. Text Displays 9

6. Saving Your Settings 10

7. Loading Your Settings 10

Troubleshooting 11

Warranty 12

www.PHOENIXGOLD.com

Phoenix Gold iSeries

Overview

Thank you for purchasing the Phoenix Gold iAMP complete plug-n-play solution. This kit comes

with everything you need in one box and provides your factory audio system with 800 watts of audio

adrenaline!

This manual will cover the features and functions of the iAMP such as the LCD Touchscreen

controller, the PC Software and basic troubleshooting.

The touchscreen LCD has many important functions such as subwoofer level control, EQ preset

selection, listening position selection and an amp reset function.

The PC Software allows the user to set certain features of the iAMP to their personal preference.

For Installation please refer to the installation manual which is also included in the iAMP kit.

Touchscreen LCD Controller

Home Screen

This screen is the default home screen and

displays important information such as the

amp temperature, voltage, equalizer setting

and listening position. Whenever the iAMP is

powered on the LCD will display the following

information:

- iAMP Revision Number

- LCD Revision Number

- Factory audio system the amp is

congured for (standard or factory

amplied

The LCD touchscreen display will always

revert back to this screen after 5-10 seconds

of inactivity (with the exception of the

calibration screen).

IMPORTANT NOTES:

1. The temperature display can be adjusted

to show Fahrenheit or Celsius depending

on the vehicles setting to standard or

metric. Please see the vehicle owner’s

manual on how to make this adjustment.

2. When OnStar or Bluetooth is active the

home screen will display the text “Audio

Compensation Active”. The audio

compensation allows the best possible

sound for these features.

Section Pages

Overview 3

Touch Screen LCD Controller

1. Home Screen 3

2. Subwoofer Level Screen 4

3. Factory EQ Preset Screen 4

4. User EQ Preset Screen 5

5. Listening Position Screen 5

6. Tools Menu 6-7

PC Software

1. Connecting the PAC-UP to the Amp/PC 8

2. Setting the Gains/Crossover Point 8

3. Setting and Saving the EQ Presets 9

4. Listening Position 9

5. Text Displays 9

6. Saving Your Settings 10

7. Loading Your Settings 10

Troubleshooting 11

Warranty 12

Phoenix Gold iSeries

www.PHOENIXGOLD.com

Subwoofer Level Screen

This screen allows adjustment of the

subwoofer volume as well as access to the

Tools menu (please see page 6 for detailed

instructions on the tools menu). To access

the subwoofer level screen press anywhere

on the home screen.

To adjust the subwoofer volume simply press

the (+) or (-) icons to the desired level.

Adjust Subwoofer Volume

Factory EQ Preset Screen

This screen allows selection of 6 different

factory preset equalizer curves. To access

this screen follow these steps:

1. Touch anywhere on the home screen to

access the subwoofer level screen

2. Press the right arrow in the bottom right

corner of the subwoofer screen

To select different eq curves simply press the

desired icon. These settings are preset from

the factory and cannot be changed.

Touchscreen LCD Controller (Cont.)

www.PHOENIXGOLD.com

Phoenix Gold iSeries

User EQ Preset Screen

This screen allows selection of 6 user

preset EQ curves. These can be adjusted

and stored with the iAMP PC software as

described on page 9. All 6 user presets are

set to at until they are adjusted with the

PC software. To access this screen follow

these steps:

1. Touch anywhere on the home screen to

access the subwoofer level screen

2. Press the right arrow in the bottom right

corner twice

To select different eq curves simply press the

desired icon.

Listening Position Screen

This screen allows selection of 4 different

listening positions. To access this screen

follow these steps:

1. Touch anywhere on the home screen to

access the subwoofer level screen

2. Press the right arrow in the bottom right

corner three times

To select listening positions simply press the

desired icon. These settings are preset from

the factory and cannot be changed.

Touchscreen LCD Controller (Cont.)

Phoenix Gold iSeries

www.PHOENIXGOLD.com

Tools Menu

The tools menu is used to calibrate the

screen and reset the amp in the event it does

not come on or pass audio. To access the

tools menu follow these steps:

1. Press anywhere on the home screen to

access the subwoofer volume screen.

2. Press the tools icon located in the lower

left corner of this screen.

To reset the amp follow these steps:

1. Access the tools menu as described above

2. Press the reset icon

Access Tools Menu

Press To Reset

In the event that you have to update the LCD

screen with a new rmware le it must be

recalibrated. To calibrate the screen follow

these steps:

1. Access the tools menu as described

above.

2. Press the “Calibrate” icon on the top left of

the screen.

Access Calibration

Touchscreen LCD Controller (Cont.)

www.PHOENIXGOLD.com

Phoenix Gold iSeries

4. Once the calibration screen comes up follow the on-screen prompts to calibrate the screen

properly.

Phoenix Gold iSeries

www.PHOENIXGOLD.com

PC Software

Setting the Gains/

Crossover Point

This screen allows you to set the gain of the

center channel and subwoofer along with the

crossover point of the system. The crossover

point affects both the sub-woofer and the full

range factory speakers.

PLEASE NOTE: The center channel gain is only

valid when the listening position is set to “Off”.

The subwoofer gain is not affected by any

listening position.

To download the iAMP PC Software please visit www.phoenixgold.com/iamppc. Please follow the

instructions included in the download to install the software on your PC.

Once Installed on your PC you can use the software to do the following:

1. Set the 6 EQ user presets

2. Set the gain of the subwoofer

3. Set the low pass lter of the subwoofer

4. Set the gain of the center channel (if present).

5. Set different listening positions (This can also be done from the touchscreen display but has been

added here to allow the user the ability to control it while setting the custom EQ curves).

Connecting the PAC-UP

to the Amplier/PC

In order to use the PC Software you must rst

connect the PAC-UP to the iAMP and your PC

using the supplied cables. The PAC-UP can be

connected either at the 5-pin port on the amplier

or the 5-pin port located behind the head unit in

the harness with the 44-pin vehicle connectors.

If connecting at the amplier you may want

to use the supplied USB extension. Once you

are connected to the amp and the PC launch

the iAMP PC software you installed on your

computer.

PLEASE NOTE: The PC interface can only be

used when the amp is installed in the vehicle

with the key on and music playing.

www.PHOENIXGOLD.com

Phoenix Gold iSeries

PC Software (Cont.)

Setting and Saving the

Graphic Equalizer

PLEASE NOTE: The accuracy of the iAMP EQ

depends on the factory radio’s bass, mid-

range and treble functions to be set to 0 or

at. Please ensure they are set this way before

proceeding

This screen allows you to set the six EQ custom

user presets. To set a user preset follow these

steps:

1. Adjust the EQ accordingly.

2. Click the “Save” button to the right of the

custom EQ presets and select a preset from the

dropdown menu.

Listening Position

This function can be changed from the

touchscreen display but has been included in

the PC software so the user can control it while

setting the custom EQ curves.

PLEASE NOTE: The accuracy of the listening

position is dependant upon the factory radios

balance and fade features to be set to the

center.

Text Displays

The text displays located above and below the

Phoenix Gold/PAC logo will display information

such as:

- The revision number of the PC interface.

- The revision number of the iAMP.

- Which factory system the iAMP is congured for.

- Temperature reading.

- Voltage reading.

Phoenix Gold iSeries

www.PHOENIXGOLD.com

PC Software (Cont.)

Saving Your Settings

Now that you have made all of the custom settings it is time to save

them to your PC. Once saved these les can be re-loaded onto the

iAMp at any time. This will allow you to save as many preset les as

you like, possibly for different driver preferences.

1. Click the “Save Settings” button in the lower left corner of the

interface software window (Fig. 1).

2. A window will pop up asking you to choose the location where

you wish to save the le (Fig. 2). We recommend saving it to your

desktop for easy access. Once you have decided on a location,

name the le then click the “Save” button in the lower right corner.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Loading Your Settings

Now that you have saved your settings it is time to load them onto

the iAMP. This only needs to be done once

1. Click the “Load Settings” button in the lower left corner of the

interface software window (Fig. 3)

2. A window will pop up asking you to browse to the le that you

saved in step 2 (Fig. 4). This should be located on your desktop

unless you chose an alternate location. Select the le you saved

earlier and click the “Open” button in the bottom right corner. The

software will now load the le onto the iAMP.

PLEASE NOTE: You may hear some audible data noise as the le

transfers, this is normal.

Tabla de contenidos

Otros manuales de Amplificador de Phoenix Gold

Phoenix Gold

Phoenix Gold Titanium 1000.2 Manual de usuario

Phoenix Gold

Phoenix Gold MX1230 Manual de usuario

Phoenix Gold

Phoenix Gold TI2800.1 Manual de usuario

Phoenix Gold

Phoenix Gold M50 Manual de usuario

Phoenix Gold

Phoenix Gold Tantrum 200.2 Manual de usuario

Phoenix Gold

Phoenix Gold XS6600 Manual de usuario

Phoenix Gold

Phoenix Gold The One Limited Edition Amplifier Manual de usuario

Phoenix Gold

Phoenix Gold XS4300 Manual de usuario

Phoenix Gold

Phoenix Gold QX300.1 Manual de usuario

Phoenix Gold

Phoenix Gold R4.0:2 Manual de usuario

Phoenix Gold

Phoenix Gold Titanium DEQ COMP Manual de usuario

Phoenix Gold

Phoenix Gold MX1260 Manual de usuario

Phoenix Gold

Phoenix Gold RSd250.2 Manual de usuario

Phoenix Gold

Phoenix Gold XS2300 blk Manual de usuario

Phoenix Gold

Phoenix Gold Titanium 900.7 Manual de usuario

Phoenix Gold

Phoenix Gold QX500.5 Manual de usuario

Phoenix Gold

Phoenix Gold MPS2500 Manual de usuario

Phoenix Gold

Phoenix Gold ZT Series Manual de usuario

Phoenix Gold

Phoenix Gold M25 series II Instrucciones de funcionamiento

Phoenix Gold

Phoenix Gold RSD500.4 Manual de usuario

Phoenix Gold

Phoenix Gold ZQ5004 Manual de usuario

Phoenix Gold

Phoenix Gold Carver MP42 Manual de usuario

Phoenix Gold

Phoenix Gold Titanium Series Manual de usuario

Phoenix Gold

Phoenix Gold MS275 Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario

Phoenix Gold iAmp Manual de usuario

Manuales populares de Amplificador de otras marcas