Philips SPC 900NC Manual de usuario
SPC900NC
User manual
2
Need help?
Online help: http://www.philips.com/support
For interactive help, downloads and frequently asked questions.
EN
3
Please check that the following items are packed in the Philips
SPC900NC box.They are provided to help you set up and use
your Philips SPC900NC.
Philips SPC900NC Installation CD-ROM Quick Installation
WebCam including manual Guide
SPC 900 NC
Installation CD v.1.00
9082 100 03367
What’s in the box?
EN
4
1 Viewing angle
For manually changing the vertical angle of the WebCam.
2 Quicklaunch button
For quick and easy start-up of the VLounge Advanced software.
3 Rotating lens
For adjusting the focus of the image manually.
4 Clamp with rubber rims
For attaching the WebCam to your monitor.
5 USB connector
For connecting the WebCam to a USB port of the PC / laptop.
The
WebCam
will derive its power from the PC / laptop when it
is connected.
6 Snapshot button
For taking photos.
7 Built in digital microphone
For adding sound when video chatting and recording.
8 Screw thread
For moutning the WebCam to a tripod.
9 Activity LED
Lights up when the WebCam is in use.
Legend of functions
2
3
1
9
6
4
7
8
5
EN
5
2 Need help?
3 What’s in the box?
4 Legend of functions
5 Contents
6 Welcome
7 Things you should know
7 Safety precautions
7 Copyright
8 Installation
8 Installing the WebCam software
10 Connecting the WebCam to your PC / laptop
11 WebCam settings
11 General controls
12 Picture controls
15 Audio controls
16 Using the applications
16 VLounge Advanced
16 Skype
17 MSN Messenger
18 Yahoo! Messenger
18 AOL Instant Messenger
18 Making snapshots using Windows®XP
19 Technical specifications
20 Important information
20 Disclaimer
20 FCC compliance
21 Environmental information
21 System requirements
21 Disclaimer of warranty
21 Limitations of damages
Contents
EN
6
The Philips SPC900NC WebCam you have just purchased is
manufactured to the highest standards and will give you years of
trouble-free use. Brilliant images and blazing colors, that's what
you get with the SPC900NC WebCam. Forget about installing
interface cards and separate power supplies, because you don't
need them any more. Power is supplied direct to the WebCam
through the USB cable and the WebCam returns audio and video
straight to your PC / laptop!
After installation, the new WebCam can be used for all sorts of
applications, such as:
•Video conferencing: use the Philips SPC900NC WebCam for
video chatting and conferencing (the Philips SPC900NC
WebCam works with Skype, MSN Messenger,Yahoo! Messenger
and AOL Messenger);
•Video e-mail / Video capture: create your own video
presentations, video mail, product demonstrations, training
videos, Internet clips etc.;
•Snapshot images: use images in presentations, create postcards,
or send them via e-mail or on diskette.The WebCam works
with all applications that use the TWAIN interface to acquire an
image.
•Editing and special effects: after recording the images you want
with the Philips SPC900NC WebCam, the images can be easily
edited using image or video editing programs.
The following sections in this manual give a step-by-step
description of the installation process and explain how to use the
Philips SPC900NC WebCam.
Welcome
EN
7
Please read the following instructions carefully, and retain them for
future reference. It may be helpful to have the instructions for use
for the PC / laptop at hand for reference.
Safety precautions
Observe the following guidelines to ensure that the WebCam will
operate safely and to prevent defects.
• Do not use your WebCam in environments outside the
following range: temperature: 0°C to 40°C, relative humidity:
45% ~ 85%.
• Do not use or store your WebCam in/under:
– direct sunlight exposure;
– very humid and dusty environment;
– near any kind of heat sources.
• If your WebCam gets wet, dry it with soft cloth as soon as
possible.
• If the lens is dirty, Do NOT touch the lens with your fingers.
• Clean the outside of the WebCam with a soft cloth.
• Do NOT use cleaning fluids based on alcohol, methylated spirit,
ammonia, etc.
• Do NOT attempt to disassemble or repair your WebCam by
yourself. Do not open the WebCam. In the event of technical
difficulties return it to your Philips retailer.
• Do NOT use your WebCam in the water.
•
Protect the WebCam from oil, vapour, steam, moisture, and dust.
• Never point the WebCam lens at the sun.
Copyright
Copyright©2003 by Philips Consumer Electronics B.V. All rights
reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system or translated
into any language or computer language, in any form or by any
means, electronic, mechanical, magnetic, optical, chemical, manual
or otherwise, without prior written permission from Philips.
Brands and product names are trademarks or registered
trademarks of their respective companies.
Things you should know
EN
8
Installation
Installing the WebCam software
The software supplied only works on PC’s / laptop’s with the
operating systems Microsoft®Windows®98SE, ME, 2000 and XP.
Notes!
– Unplug all your USB devices (except USB keyboard and
USB mouse) before you start.
– Do not plug in your USB WebCam yet. Run the Installation CD-
ROM first.
– Have your Windows®CD-ROM at hand.
– The SPC900NC WebCam is 'XP Plug & Play'.This means if you are
running Windows XP and you have installed Service Pack 2 and
the latest Microsoft Windows XP updates you don't need to install
the SPC900NC WebCam driver. Simply plug in the WebCam and
you can start using your SPC900NC WebCam.
1Place the installation CD-ROM in your PC’s / laptop’s
CD-ROM / DVD drive.
> After a couple of seconds the the ‘Language selection’ screen
appears automatically.
Note!
If the 'Language selection' screen does not appear automatically,
open the Microsoft®Windows®Explorer and double click on the
'Set-up.exe' icon in the CD-ROM directory.
2Select your language and click on the 'OK' button.
> The following screen appears.
3Select at least the ‘SPC900NC WebCam Driver’ and ‘Philips
VLounge Advanced’.
Click on the 'Next' button.
EN
9
> The following software license agreement appears.
4Click on 'Yes' to continue the installation.
> The following screen, including a progress bar, appears.
> The following screen appears when the installation was
successful.
5Click on 'Finish'.
6Restart your PC / laptop when you have finished installing the
software.
> The V(ideo)-Lounge Advanced desktop shortcut will be
installed after installation.
> Via VLounge Advanced you have access to all WebCam-related
software. See ‘Using the applications’.
7You can now connect your WebCam.
Installation
EN
10
Connecting the WebCam to your
PC / laptop
1Be sure to run the installation CD first,before connecting the
WebCam to the PC / laptop.
2Turn on the PC / laptop.
3Connect the USB plug of the USB cable to the USB port of
the PC / laptop.
>
The WebCam will now derive its power from the PC / laptop.
4Use the clamp and the two rubber rims to attach the
WebCam to your PC monitor or laptop screen or fold out
the clamp and place the WebCam on your desk.
Installation
4
4
4
33
Otros manuales para SPC 900NC
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cámara web de Philips
Philips
Philips SPC640NC/00 Manual de usuario
Philips
Philips SPZ5000 Manual de usuario
Philips
Philips PCVC665K99 Manual de usuario
Philips
Philips SPC630NC Manual de usuario
Philips
Philips SPC230NC/27 Manual de usuario
Philips
Philips SPC710NC Manual de usuario
Philips
Philips SPC315NC Manual de usuario
Philips
Philips SPC1000NC/00 Manual de usuario
Philips
Philips SPC200NC/00 Manual de usuario
Philips
Philips SPC630NC/00 Manual de usuario
Philips
Philips PCVC680K99 Manual de usuario
Philips
Philips SPZ3000/00 Manual de usuario
Philips
Philips SPC510NC Manual de usuario
Philips
Philips SPC320NC/00 Manual de usuario
Philips
Philips SPC535NC/00 Manual de usuario
Philips
Philips Share SPC1030NC Manual de usuario
Philips
Philips PC Camera Manual de usuario
Philips
Philips SPC505NC Manual de usuario
Philips
Philips SPZ2500/00 Manual de usuario
Philips
Philips SPC611NC Manual de usuario
