Philips SRU5110/86 Manual de usuario

SRU 5110/86

EN Remote control 3

FR Télécommande 9

DE Fernbedienung 16

NL Afstandsbediening 23

DK Fjernbetjeningen 30

SV Fjärrkontrollen 37

NO Fjernkontrollen 43

FI Kaukosäätimen 49

and get support at

www.philips.com/welcome

Universal remote control

125254c4_SRU5110_86_115 23-11-2007 14:54 Pagina 1

SRU 5110

125254c4_SRU5110_86_115 23-11-2007 14:54 Pagina 2

ENGLISH

Table of contents

1 Your universal remote control 3

2 Installing the remote control 3-6

2.1 Inserting the batteries 3

2.2 Testing the remote control 4

2.3 Setting the remote control 4-6

3 Keys and functions 6

4 Extra possibilities 7

Restoring the original remote control settings 7

5 Frequently asked questions 8

6 Need help? 8

Code list of all brands / equipment 55-57

Information to the Consumer 59

1 Your universal remote control

Congratulations on your purchase and welcome to Philips.

To fully benefit from the support that Philips offers, register your product

at www:philips.com/welcome. For quick, clean and easy setup go to:

www.philips.com/urc

After installing the remote control it can operate the most-used functions

of almost any brand of TV.

2 Installing the remote control

2.1 Inserting the batteries

Press the cover inwards and slide it in the direction of the arrow.

Place two AAA type batteries into the battery compartment, as

shown.

Replace the cover and click it firmly into place.

3Installing the remote control

125254c4_SRU5110_86_115 23-11-2007 14:54 Pagina 3

2.2 Testing the remote control

The remote control has been programmed to operate the most-used

functions of almost any brand of TV. Because the SRU 5110 may use

different signals for each brand and even for different models of the same

brand, it is advisable to test whether your device responds to the

SRU 5110.

The example below instructs you how to do this.

Turn your TV on manually or use the original remote control.

Tune to channel 1.

Check whether all the keys are working.

For an overview of the keys and their functions see

‘3. Keys and functions’.

• If the TV responds as it should to all of the key commands the SRU 5110

is ready for use.

Tip

If the TV does not respond at all or not to all of the key commands, follow

the instructions under ‘2.3 Setting the remote control’, or for online setup go

to: www.philips.com/urc.

2.3 Setting the remote control

This is only necessary if your TV does not respond to the SRU 5110.

If that is the case, the SRU 5110 does not recognize the brand and/or

model of your TV and you need to program the remote control to do so.

Turn on the TV manually or use the original remote control.Tune in

to channel 1.

Look up the brand of your TV in the code list at the back of this

manual.A four-figure code is shown for each brand.

Note the code for your brand.

ENGLISH

4Installing the remote control

ENGLISH

125254c4_SRU5110_86_115 23-11-2007 14:54 Pagina 4

ENGLISH

Installing the remote control

Press the SET UP key

until the LED flashes twice and then remains

lit.

Then enter the code noted in step 2 using the numeric keys.

• The LED now flashes twice.

•If the LED flashes once for an extended period, the code has not

been entered properly or the wrong code has been entered.

Start again from step 2.

Press and hold the Standby key of the SRU 5110 until your TV

switches off (standby).

Then release the key immediately.

• The SRU 5110 is now set to operate your TV.

Check if you can operate all functions on your TV with the SRU 5110.

• If a key does not function properly, keep it pressed until it works.

Then release the key immediately.

Repeat this for every key that does not work.

• If the TV responds to all of the key commands, the SRU 5110 is

ready for use.

Do not forget to note your code.

Keep the SET UP key pressed for 5 seconds to exit setup mode.

• When no key is pressed for 2 minutes or more the remote control will

exit setup mode automatically.

SRU 5110

125254c4_SRU5110_86_115 23-11-2007 14:54 Pagina 5

Full search setup

If your code does not work or if the brand of your device is not

mentioned in the code list, you can try setting the remote control with

full search setup.

Press the SET UP key u

ntil the LED flashes twice and then remains

lit.

Press and hold the Standby key of the SRU 5110 until your TV

switches off (standby).

Then release the key immediately.

• The SRU 5110 is now set to operate your TV.

Full search setup takes about 5 minutes.

3 Keys and functions

The illustration on page 2 gives an overview of all keys and their functions.

1 SET UP enters setup mode.

2 Text TV on/off.

Electronic Program Guide.

Wide screen TV.

Text TV off.

3 Text TV color keys. Used in text mode and in

some on-screen menus.

4 MENU turns the menu on and off.

5 Cursor keys cursor up, down, left, right in a menu.

6 INFO displays on-screen channel information.

7smutes the TV sound.

8 - VOL + adjusts the TV volume.

9 Numeric keys direct choice of channels and other functions.

10 A/V switches between external inputs of your

equipment.

SRU 5110

ENGLISH

Keys and functions

ENGLISH

125254c4_SRU5110_86_115 23-11-2007 14:54 Pagina 6

ENGLISH

Extra possibilities

11 PICTURE changes picture / screen settings.

AUDIO changes audio settings.

enlarges Text TV picture.

shows subtitle text.

SLEEP activates / deactivates sleep timer.

holds current Text TV page.

12 /selects between one- and two-figure channel

numbers.

13 P1P selects previous programme / channel

14 -PROG + selects a previous or following channel.

15 OK confirms your selection.

16 BACK jumps back one level in the menu or turns off the

menu.

17 yStandby switches TV on or off.

18 LED • blinks in setup mode.

• lights up when a remote control command is

sent.

Note

If the device does not respond at all, or not to all of the key commands,

follow the instructions under ‘2.3 Setting the remote control.

4 Extra possibilities

Restoring the original functions of your remote control

Keep keys 1 and 6 on the SRU 5110 pressed simultaneously for three

seconds, until the LED flashes twice and then remains lit.

Press keys 9, 8 and 1, in that order.

• The LED flashes twice.

All original functions have now been restored and any extra functions

have been deleted.

125254c4_SRU5110_86_115 23-11-2007 14:54 Pagina 7

5 Frequently asked questions

In this chapter you find answers to the most frequently asked questions

about your universal remote control.

The TV does not respond and the LED key does not flash when I

press a key.

Replace the old batteries with two new AAA batteries.

The TV does not respond but the SET UP key does flash when a

key is pressed.

Point the SRU 5110 at the TV and make sure that there are no

obstructions between the SRU 5110 and the TV.

The SRU 5110 does not respond properly to commands.

Try programming the SRU 5110 again.

If the TV still does not respond, call our helpline.

The Text TV keys do not work.

• Find out whether your TV is equipped with Text TV.

• Maybe the SRU 5110 has to be adapted to the model of the device.

Call our helpline for details.

6 Need help?

If you have any questions about the SRU 5110, you can always contact us.

You will find our contact details after the code list at the back of this

manual.

Read this manual carefully before you make a call.

You can solve most of the problems yourself. If you cannot find any

answers to your problems, write down the details of your device in the

code list at the back of this manual.

This will help our operators to assist you better and more quickly. Look

up the numbers of the models in the instructions accompanying the

device or on the back of your device.When you call our helpline, make

sure the device is to hand so that our operators can help you determine

whether your remote control is working properly.

The model number of your Philips universal remote control is

SRU 5110/86.

Date of purchase: ......../......../........

(day/month/year)

ENGLISH

8Need help?

ENGLISH

125254c4_SRU5110_86_115 23-11-2007 14:54 Pagina 8

FRANÇAIS

Installation de la télécommande

Table des matières

1 Votre télécommande universelle 9

2 Installation de la télécommande 9-12

2.1 Mise en place des piles 9

2.2 Tester la télécommande 10

2.3 Configuration de la télécommande 11-12

3 Touches et fonctions 13

4 Possibilités supplémentaires 14

Restauration des paramètres initiaux de la télécommande 14

5 Foire aux questions 14

6 Besoin d’aide ? 15

Liste des codes des marques / équipements 55-57

Informations pour le consommateur 59

1 Votre télécommande universelle

Félicitations pour votre achat et bienvenue chez Philips !

Pour profiter pleinement de l’assistance Philips, enregistrez votre produit

sur le site www.philips.com/welcome

Pour un réglage simple et rapide, rendez-vous sur le site :

www.philips.com/urc

Une fois la télécommande installée, vous pourrez l'utiliser pour

commander les fonctions courantes de la plupart des téléviseurs.

2 Installation de la télécommande

2.1 Mise en place des piles

Faites glisser le couvercle en appuyant vers l’intérieur dans la

direction de la flèche.

Insérez deux piles de type AAA dans le compartiment à piles, comme

indiqué.

Replacez le couvercle jusqu’à ce que vous entendiez un déclic.

125254c4_SRU5110_86_115 23-11-2007 14:54 Pagina 9

2.2 Tester la télécommande

La télécommande est programmée pour commander les fonctions

courantes de la plupart des téléviseurs. La télécommande SRU 5110 peut

utiliser différents signaux en fonction de chaque marque et de chaque

modèle de la même marque. C’est pourquoi il est conseillé de vérifier

que votre appareil réponde à la télécommande SRU 5110.

L’exemple ci-après vous indique comment procéder.

Allumez votre téléviseur manuellement ou à l’aide de sa

télécommande d’origine. Sélectionnez la chaîne 1.

Vérifiez que toutes les touches fonctionnent.

Pour une présentation des touches et de leurs fonctions, consultez la

section 3.Touches et fonctions.

• Si le téléviseur répond correctement à toutes les touches,

la télécommande SRU 5110 est opérationnelle.

Conseil

Si le téléviseur ne répond pas à certaines ou à toutes les touches, suivez les

instructions de la section 2.3 « Configuration de la télécommande » ou si

vous préférez une configuration en ligne, rendez-vous sur le site :

www.philips.com/urc

2.3 Configuration de la télécommande

Cette opération n'est nécessaire que si votre téléviseur ne répond pas à

la télécommande SRU 5110. Ce sera le cas si la SRU 5110 ne reconnaît

pas la marque ou le modèle de votre téléviseur. Il vous faudra alors

programmer la télécommande pour le téléviseur.

Allumez votre téléviseur manuellement ou à l’aide de sa

télécommande d’origine. Sélectionnez la chaîne 1.

Trouvez la marque de votre téléviseur dans la liste des codes au dos

de ce manuel. Un code à quatre chiffres correspond à chaque marque.

Notez le code de votre marque.

10 Installation de la télécommande

FRANÇAIS

125254c4_SRU5110_86_115 23-11-2007 14:55 Pagina 10

Otros manuales para SRU5110/86

Tabla de contenidos

Idiomas:

Otros manuales de Mando a distancia de Philips

Philips

Philips SRC3036/27 Manual de instalación y operación

Philips

Philips SRP5002/10 Manual de usuario

Philips

Philips MAGNAVOX PR1911B Manual de usuario

Philips

Philips Perfect replacement SRU5108/27 Guía del administrador

Philips

Philips SBC RU 510 Manual de usuario

Philips

Philips SRP4004 Manual de usuario

Philips

Philips Pronto SBCRU930 Manual de usuario

Philips

Philips SRU3005 Manual de usuario

Philips

Philips US2-PDVD6 Manual de usuario

Philips

Philips SRP2006/55 Manual de usuario

Philips

Philips Perfect replacement SRP5107WM Manual de usuario

Philips

Philips Perfect replacement SRP5107WM/17 Manual de usuario

Philips

Philips Perfect replacement SRU5107WM Manual de usuario

Philips

Philips SRP2008B/86 Manual de usuario

Philips

Philips SRP4004/87 Manual de usuario

Philips

Philips SRP5002 Manual de usuario

Philips

Philips SRU5130/87 Manual de usuario

Philips

Philips SBC RU 220/00 Manual de usuario

Philips

Philips Perfect replacement SRU5108 Manual de usuario

Philips

Philips SBC RU 240/00 Manual de usuario

Philips

Philips SBCRU640/00 Manual de usuario

Philips

Philips SBCRU125 Manual de usuario

Philips

Philips SRU3007/27 Manual de usuario

Philips

Philips Home power SRP4419V/27 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación