Philips SRU7060/10 Manual de usuario

SRU 7060/10

User Manual 3

Manuel d’utilisation 14

Bedienungsanleitung 25

Gebruikershandleiding 36

Manuale d'uso 47

Guía de usuario 58

Manual do utilizador 69

Brugervejledning 80

Använderhandbok 90

Brukerhåndbok 100

Käyttöohje 110

Quick, Clean & Easy Setup

www.philips.com/urc

Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12

Programming Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8

Learn a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Switching backlighting on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Reset a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Copy a device mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Reset all functions in a device mode . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11

Assign Volume control to another mode . . . . . . . . . . . . . . . . . . . . . . . . . 11

Restoring all original functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . 121-145

Information to the Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

1. Introduction

Congratulations on your purchase of the Philips SRU 7060 universal remote

control. After installing the remote control you can operate a maximum of 6

different appliances with it:

TV, DVD player/recorder, STB (settop box, satellite tuner/cable decoder),

AMP (amplifier/receiver),VCR and CD player/recorder.

You can find information about how to prepare this remote control for use in

the chapter ‘Installing the remote control’.

2. Installing the remote control

Inserting the batteries

1Press the cover inwards and slide it in the

direction of the arrow.

2Place two AA type batteries into the battery

compartment, as shown.

3Slide the cover back and click it firmly into place.

Testing the remote control

The remote control has been programmed to operate most Philips

appliances. Because the SRU 7060 may use different signals for each brand

and even for different models of the same brand, it is advisable to test

whether your appliance responds to the SRU 7060.

The example below (TV) instructs you how to do this.

You can repeat the same steps for other appliances (DVD,VCR, etc.) which

you want to operate using the SRU 7060.

Example of TV:

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

Instructions for use

English

2Select the device mode TV with the

SELECT key. Press the SELECT key until the

light around the Standby key lights up.

To select the other devices press the SELECT

key several times until the label of the device

you want to operate, lights up.

If neither the Standby key nor one of the labels light up, check whether

the batteries are properly inserted (see ‘Inserting the batteries’).

3Check whether all the keys are working.

For an overview of the keys and their

functions see ‘3. Keys and functions’.

– If the TV responds as it should to all of the

key commands the SRU 7060 is ready for use.

• If the device does not respond at all or not to all of the

key commands, follow the instructions under

‘Setting the remote control’, or for online setup go to:

www.philips.com/urc.

Setting the remote control

This is only necessary if your appliance does not respond to the SRU 7060.

If that is the case, the SRU 7060 does not recognize the brand and/or model

of your appliance and you need to program the remote control to do so.

The example below (TV) instructs you how to do this.

You can repeat the same steps for other appliances (DVD,VCR, etc.) which

you want to operate using the SRU 7060.

Automatically setting the remote control

The remote control will now automatically search for the right code for your

device.

Example TV:

1Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

• If the device is a DVD-player/recorder or VCR, insert a disk or tape and

start playback.

2Select the device mode TV with the

SELECT key. Press the SELECT key until the

light around the Standby key lights up.

3Then keep keys 1 and 3 pressed

simultaneously for three seconds until the

light around the Standby key blinks twice and

then remains lit.

Instructions for use

English

4Press and hold the Standby key of

the SRU 7060 briefly.

– The SRU 7060 now starts emitting all known

‘TV off’ signals, one by one.

Each time a code is sent, the light around the

Standby key lights up.

5When your TV switches off (standby),

release the Standby key of the SRU 7060

immediately.

– The SRU 7060 has now found a code that

works on your TV.

6Check if you can operate all functions on your TV with the SRU 7060.

• If this is not the case, you can redo the automatic setting.The

SRU 7060 will then search for a code that perhaps works better.

– After the SRU 7060 has run through all the known codes, the search

will stop automatically and the light will stop blinking.

– Automatic programming of a TV takes a maximum of 3 minutes.

For DVD, CD,VCR, AMP and STB this time is 2 minutes.

Manually setting the remote control

Example TV:

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the brand of your TV in the

code list at the back of this manual. One or

more four-figure codes are shown for each

brand.

Note the first code.

Be careful! There are separate tables for TV, VCR,

DVD, etc.

On our website www.philips.com/urc you can directly select your device

typenumber to find the right code.

Make sure you use the codes from the correct table.

3Select the device mode TV with the

SELECT key. Press the SELECT key until the

light around the Standby key lights up.

Instructions for use

English

4Then keep keys 1 and 3 pressed

simultaneously for three seconds until the

light around the Standby key blinks twice and

then remains lit.

5Enter the code noted in step 2, using the digit keys.

– The light will now blink twice.

If the light blinks once for an extended period, the code has not been

entered properly or the wrong code has been entered.

Start again from step 2.

6Point the SRU 7060 at the TV and check that it responds as it should.

– If the TV responds to all of the key commands, the SRU 7060 is ready

for use. Do not forget to note your code.

• If the device does not respond at all, or not to all of the key

commands, start again from step 2 and try the next code from

the list.

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1yStandby. . . . . . . . . switches the remote control on or off.

2LEARN . . . . . . . . . . . switches the SRU 7060 in programming or

learning mode.

3MENU . . . . . . . . . . . . turns the menu on and off.

4Cursor ring . . . . . . . cursor up, down, left and right in a menu.

5AV . . . . . . . . . . . . . . . . selects external Audio/video input(s).

6- a+. . . . . . . . . . . . . Volume up / down of TV or Amplifier.

7Digit keys – direct choice of channels and other functions;

– source selection in AMP (amplifier) mode.

– source selection in AMP (amplifier) mode. Press

the SHIFT-key together with the desired Source

key (TV, DVD,VCR,TUNER, CD, AUX,TAPE,

VCR2).

8SHIFT . . . . . . . . . . . . for extra functions.When pressed at the same

time as a second key, the second key will get

another function. For example:

SHIFT + 2:. . . . . . . . record;

SHIFT + 5:. . . . . . . previous track;

SHIFT + 6:. . . . . . . next track;

SHIFT + BACK:. . . system menu (DVD).

Try out other combinations with the SHIFT-key on

your appliance in order to find out which functions

are available. Only functions featured on the

original remote control are available.

95. . . . . . . . . . . . . . . . . VCR/CD/DVD: rewinds the tape or disc.

TV/STB/CBL: red fasttext key.

09. . . . . . . . . . . . . . . . . VCR/CD/DVD: stops the tape or disc.

TV/STB/CBL: green fasttext key.

!2. . . . . . . . . . . . . . . . . VCR/CD/DVD: play tape or disc.

SHIFT+2: record.

TV/STB/CBL: white fasttext key.

@;. . . . . . . . . . . . . . . . . . VCR/CD/DVD: pause.

TV/STB/CBL: yellow fasttext key.

#6. . . . . . . . . . . . . . . . . VCR/CD/DVD: winds the tape or disc.

TV/STB/CBL: blue fasttext key.

Instructions for use

English

$-/-- . . . . . . . . . . . . . . . . selects between one- and two-figure channel

numbers.

%s. . . . . . . . . . . . . . . . . mutes the sound of the TV or amplifier.

^- P + . . . . . . . . . . . . . . program up/down, channel up/down,

next/previous.

&P(P. . . . . . . . . . . . . . . previous program/channel.

*OK . . . . . . . . . . . . . . . OK, enter, acknowledge.

(BACK. . . . . . . . . . . . . jumps back one level in the menu, or turn off

menu.

). . . . . . .

TV: teletext on/off, hold, movie expand, teletext off.

VCR: text, text on/off, txt hold, Showview,

Videoplus, clear.

STB: text, text on/off, info, OSD, subtitle, favorite.

DVD: menu, disc menu, info, display, subtitle, angle.

AMP: top menu, title, disc, RDS, info,

Dolby mode, repeat.

CD: disc, info, display, program, repeat.

¡GUIDE . . . . . . . . . . . guide, info or white.

™SELECT . . . . . . . . . .

selects the device you want to operate:

TV,VCR, STB (settop box, satellite tuner/cable

decoder), AMP, DVD or CD.The corresponding

device indicator lights up in the selector window (for

TV this is the LED around the Standby (y) key).

If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote control’.

It is possible that you must enter another code for the device.

4. Extra possibilities

Programming Macros

A macro allows you to automate actions you have to do frequently with your

remote control. E.g. if you want to watch a DVD, you have to turn on the

DVD, turn on the TV, turn on the receiver/amplifier, select the DVD input

channel on your amplifier and start playing the DVD.The different keys you

have to press to do this, can be stored under one single key. So you only

have to press one button to start up your system for watching a DVD.

Example ‘Watching DVD’ macro:

1Select the required mode with the

SELECT key, e.g. DVD mode.

2Press keys 1 and 6 of the SRU 7060

simultaneously for 5 seconds until the

DVD label blinks twice and then remains lit.

3Press keys 9, 9 and 1, in that order.

Instructions for use

English

4Press the key under which you want to

store the macro, e.g. the P(P key.

Notes:

–Once a macro is stored under a key, the original

function of the key can not be used anymore.

– You can also store the macro by pressing Shift in

combination with a target key (the target key keeps its original function).

– You cannot store a macro under the SELECT, LEARN or SHIFT key.

5Enter the sequence of keys to be stored, e.g.:

• Select DVD mode with SELECT key and press the Standby key.

• Select TV mode with SELECT key and press 1.

• Select AMP mode with SELECT key and press the Standby key.

• Select DVD mode with SELECT key and press 2.

6To close the macro press the LEARN key.

– The DVD label blinks twice to confirm.

• If you now select DVD mode and press

the P(P key, the remote will switch on the

DVD, the TV and the AMP and starts playing

the disc.

Learn a key

If you miss certain functions from your original remote control of the

SRU 7060, the SRU 7060 can learn these functions from the original remote.

You can store a fuction under any of the available keys of the SRU 7060,

except LEARN, SELECT and SHIFT. Please, note that any function already

stored under a key will be deleted.

Example for VCR:

Make sure you have the original VCR remote control at hand.

1Select the device mode VCR, with the

SELECT key.

2Press the LEARN key and the target key on

the SRU 7060 simultaneously for 5 seconds,

until the VCR label blinks twice and remains lit.

3Place both remote controls on a flat surface

(like a coffee table) and aim them head-to-

head with about 10cm in between.

4Press the button you want to copy on the original remote control.

– If the SRU 7060 has learned the code, the VCR label will blink twice to

confirm the signal is stored.

– If the VCR light blinks once for a longer period, the IR signal is not

learned by the SRU 7060. Please, try a few times and make sure the

remotes are aligned as described in step 3.

Instructions for use

English

If the SRU 7060 cannot learn the code after several times trying,

it is possible that:

– The IR signal of your original device is out of range (the SRU 7060 can

only learn IR signals with a carrier signal of 30-60kHz.

– The memory of the SRU 7060 is full.

– The SRU 7060 stopped the learning process after 20 seconds if no

IR signals are found. Check if your original remote control is working

correctly.

Switch backlighting on or off

With the backlighting of the SRU 7060 you can find the right key on your

remote, even in a dimly lit room. As the backlighting consumes additional

power, the battery lifetime will reduce when the backlighting is used

frequently.Therefore it is possible to switch this function off.

Turn on the backlighting:

• Press keys 7 and 9 simultaneously for

5 seconds.

– The Standby light will blink twice to confirm

the backlighting is enabled.

• Everytime you press a key on the remote the

backlighting will switch on. After 5 seconds it

will switch off automatically

Turn off the backlighting:

• Press keys 1 and 9 simultaneously for

5 seconds.

– The Standby light will blink twice to confirm

the backlighting is disabled.

• The backlighting will not switch on anymore

when you press a key.

Reset a key

To delete a learned function or a macro from a key and restore the original

function, do the following:

1Select the correct device mode in which you want to restore a key.

2Press the keys 1 and 6 simultaneously for

5 seconds until the label of the selected mode

blinks twice and remains lit.

3Press keys 9, 9 and 6, in that order.

4Press the key you want to reset twice.

– The label of the selected mode blinks twice to confirm that the learned

code or macro is deleted and the original function is restored.

Instructions for use

English

Copy a device mode

In case you have two TV’s, you can change any of the other device modes of

the SRU 7060 into a second TV mode for controlling that second TV.

Example:You have two TVs, but no satellite or cable box.

1Select the target mode STB with

the SELECT key.

2Press keys 1 and 6 simultaneously for

5 seconds until the label of the selected mode

blinks twice and remains lit.

3Press keys 9, 9 and 2, in that order.

4Select the source mode (TV) you want to

copy.

5Press key 1.

– The STB mode label will blink twice to

confirm.You can now program the STB mode

for operating a second TV. Please read chapter

2 ‘Installing the remote’ how to do this.

– Any satellite device, learned keys or macros

stored in the STB mode will be deleted.

• If the mode light blinks once for a longer time, the copying failed.

Try again from step 1.

Reset all functions in a device mode

To reset a copied device mode to the original mode or to delete all learned

keys or macros stored in a mode, you can reset this mode to the default

factory settings.

1Select the mode to be reset with the SELECT key.

2Press keys 1 and 6 simultaneously for

5 seconds until the label of the selected mode

blinks twice and remains lit.

3Press keys 9, 9 and 6, in that order.

Instructions for use

English

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Mando a distancia de Philips

Philips

Philips PM725S Manual de usuario

Philips

Philips SRU 560/86 Manual de usuario

Philips

Philips Omni Remotes RC3441507/01BR Manual de usuario

Philips

Philips 22AV8573 Manual de usuario

Philips

Philips SRU3006 Manual de usuario

Philips

Philips IRT 9090 Manual de usuario

Philips

Philips SBC RU 760 Manual de usuario

Philips

Philips SBCRU880/10C Manual de usuario

Philips

Philips Perfect replacement SRU5108 Manual de usuario

Philips

Philips SRP3011 Manual de usuario

Philips

Philips 22AV8573/00 Manual de usuario

Philips

Philips Trilingual Front CoverArt PH5DSS Manual de usuario

Philips

Philips SRP4004/86 Manual de usuario

Philips

Philips SRU5050/55 Manual de usuario

Philips

Philips PRESTIGO SRU8008 Manual de usuario

Philips

Philips Perfect replacement SRP1003 Manual de usuario

Philips

Philips SRP1101/10 Manual de usuario

Philips

Philips Universal SBC RU 151 Manual de usuario

Philips

Philips RC1974503/00RF Manual de usuario

Philips

Philips SRP2014C/27 Manual de usuario

Philips

Philips SRP 1001/10 Manual de usuario

Philips

Philips SRU5150/86 Manual de usuario

Philips

Philips SRC2063 Manual de usuario

Philips

Philips SRU3040 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación