Perle IOLAN SCG Manual de usuario

IOLAN SCG Quick Start Guide –Expandable Models P/N 5500437-10 (Rev E) 1

IOLAN SCG

Expandable Models

Quick Start Guide

______________________________________________________________

The IOLAN SCG gives you a way to access serial devices remotely from anywhere

there is a network connection.

This guide covers basic installation and configuration and is intended for first time

setup or product evaluation. Complete details can be found in the following guides

at www.perle.com/downloads.

•IOLAN Secure User’s Guide

•IOLAN Secure Command Line Interface Reference Guide

•IOLAN SCG Hardware Installation Guide –Expandable Models

IOLAN SCG Models

All IOLAN SCG models have the following basic hardware set. 16/32/48, RJ45 serial

and/or 16/32/48 USB ports (any combination of USB/RJ45 ports), using 16 port

expansion modules.

•2 RJ45 auto-sensing Ethernet 10/100/1000 Mbps ports

•2 SFP 100/1000 Ethernet transceiver ports

•1 Micro-USB and 1 RS232 RJ45 Console Admin Port

•2 USB front ports for serial class devices

•Front Panel Display with keyboard

Note: When using Ethernet Combo ports (RJ45 and SFP pair), only one interface

will be active at a time.

Optional hardware

•Internal V.92 modem with one RJ11 connector

•Cellular WWAN capability based on 4G LTE technology (North American or

European)

•SIM card slot to be used for 4G LTE networks

•Wireless LAN (Wifi) client 802.11 a,b,g,n @2.4Ghz/5Ghz support

What’s in the box?

The following components are included with your product:

✓IOLAN SCG Chassis: 1U-tall (1.75 inch), rack-mountable chassis

•Combination of:

•16 port USB, RS232 or RS232/422/485 RJ45 modules

to a maximum total of 48 ports in the back of the unit

IOLAN SCG Quick Start Guide –Expandable Models

✓Power cables for dual AC

✓DC power terminal plug strain relief bracket for DC model

✓Quick Start Guide (this guide)

✓Rack mount kit

✓1 meter CAT5 straight-through patch cable

✓Adapter to convert from Cisco (RJ45) pin-out to DB9F

Added components for wireless models:

✓2 x RP-SMA Antennas

Added components for cellular models:

✓Two multi-band swivel-mount dipole antennas

What You Need to Supply

Before you can begin, you need to have the following:

•A serial cable(s) to connect serial devices to your IOLAN unit

•An Ethernet CAT5e 10/100/1000BASE-T cable/s or an SFP module/s with the

appropriate fiber cable to connect the IOLAN unit to the network

•Data Plan subscription with a supported carrier and activated 3FF SIM Card

for SCG-LA or SCG-LE models only

Hardware Features

SCG Front View

SCG Back View

IOLAN SCG Quick Start Guide –Expandable Models

Configuring the Unit

The IOLAN SCG features several different configuration methods (i.e. HTTP,

HTTPS, Telnet and SSH). To use these methods, you must first configure an IP

address in the IOLAN. (see “Initial Setup”for details). More information can be

obtained from IOLAN SCG documentation on the Perle website at

www.perle.com

Hardware Connections

Connecting the Power

When the power is connected to the IOLAN, the System Ready LED will cycle

through several sequences and will end in a solid green once the unit is fully

booted and ready to be configured. If both power connectors are used, either

one is able to power the unit on its own.

AC Model DC Model

Connecting Ethernet

Connect LAN cable/s from the Ethernet 1/2 RJ45 or SFP connectors on the back of

the IOLAN SCG to your network. Cat5e cables are recommended for 1000 Mbps

connections.

Speed Indicator (on Ethernet Connector/s)

•Green—1000 Mbps (flashes with activity)

•Orange—100 Mbps (flashes with activity)

•Off—No LAN connection

Activity Indicator

Off—No serial activity

On—Tx/Rx flashes with transmit/receive serial activity

Connecting the Serial Device(s)

By default, the IOLAN allows you to connect “DTE” type devices (i.e.

workstations, servers, routers, etc…). If you are connecting a DCE type of device

IOLAN SCG Quick Start Guide –Expandable Models

(i.e. modem), you should configure the serial port as “rolled” (only applies to

RS232). See the IOLAN Secure User’s Guide for more information.

Setting an IPv4 address through the Front Panel

By default, the IOLAN SCG is configured as a DHCP client on the Ethernet ports.

To enter IPv4 information:

1. From the Main Menu, press the Down arrow to scroll to Configuration.

2. Press the Right arrow, twice. (“Eth 1”)

3. Press the Down arrow. (“Eth1 DHCP: On”)

Press the Center button to enter “Edit”mode.

Use the Right arrow to select “>OFF”

Press the Center button to apply the change.

4. Press the Down arrow. (“Eth 1 IP Address”)

5. Press the Center button for Enter to go into “Edit”mode. A cursor will flash

under the first zero (0) in the IP address.

Use the left or right arrow to move the cursor to the left or right position.

Use the up or down arrow to increment or decrement the numerical value.

6. When done, press the Center button to apply the change.

7. Press the Down arrow to scroll to the next screen to enter the Network mask.

8. Repeat step 5 to enter the Eth1 Network Mask.

9. Press the Center button for Enter.

10. You will be prompted to Save Network Configuration.

11. Press the left arrow button, select Yes, then Press the Center button for Enter to

save your selection.

12. Press the Back button twice to go back to the Main Menu.

Registering the IOLAN

You should register your IOLAN online at:

www.perle.com/support_services/warranty_reg.asp

Contacting Technical Support

Contact information for the Perle Technical Assistance Center (PTAC) can be

found at the link below.

www.perle.com/support_services/support_request.shtm

Otros manuales para IOLAN SCG

Tabla de contenidos

Otros manuales de Servidor de Perle

Perle

Perle IOLAN DS1 Manual de usuario

Perle

Perle IOLAN SCG Manual de usuario

Perle

Perle IOLAN PLUS 102 Manual de usuario

Perle

Perle IOLAN SDS4 W Manual

Perle

Perle IOLAN DS1 Manual de instrucciones

Perle

Perle IOLAN SDS Manual de usuario

Perle

Perle 833 Manual de usuario

Perle

Perle SDS 1W Manual de usuario

Perle

Perle IOLAN DS1 G Manual de usuario

Perle

Perle IOLAN+ Manual de instrucciones

Perle

Perle IOLAN SCR1618 RDAC Manual de usuario

Perle

Perle IOLAN DS Manual de usuario

Perle

Perle IOLAN DS1 Manual de usuario

Perle

Perle IOLAN DG1 TX Manual

Perle

Perle IOLAN TG2 Manual

Perle

Perle IOLAN CSS Manual de instrucciones

Perle

Perle IOLAN SDS Manual de usuario

Perle

Perle IOLAN+ Manual de usuario

Perle

Perle IOLAN SDG4 TX Manual

Perle

Perle IOLAN SDS2 LA Manual

Perle

Perle IOLAN SDS4 HL Manual de usuario

Perle

Perle IOLAN DS1 G Manual

Perle

Perle IOLAN DS1 Manual de usuario

Perle

Perle JETSTREAM 4000 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario