Pentax Optio 33L Manual de instrucciones

Viewing Your Digital

Camera Images

On Your PC

(PC Connection Manual)

Introduction

This booklet explains how to view the images you took with the

PENTAX Optio 33L on your PC. Keep this manual in a safe place.

Regarding copyrights

Images taken using the Optio 33L that are for anything other than personal

enjoyment cannot be used without permission according to the rights as

specified in the Copyright Act. Please take care, as there are even cases where

limitations are placed on taking pictures even for personal enjoyment during

demonstrations, industrial enterprise or as items for display. Images taken with

the purpose of obtaining copyrights also cannot be used outside the scope of

use of the copyright as laid out in the Copyright Act, and care should be taken

here also.

Regarding trademarks

• CompactFlash and CF are trademarks of SanDisk Corporation.

• PENTAX is a trademark of PENTAX Corporation.

• Optio is a trademark of PENTAX Corporation.

• All other brands or product names are trademarks of registered trademarks of

their respective companies.

• The USB driver uses software developed by inSilicon Corporation.

• This product supports PRINT Image Matching II.

When used in combination, PRINT Image Matching II enabled digital still

cameras, printers and software help photographers to produce images more

faithful to their intentions.

PRINT Image Matching is a trademark of Seiko Epson Corporation.

The PC screenshots in this booklet may differ from your PC, depending on your

model.

Introduction..............................................................................................2

Contents ..................................................................................... 3

Viewing Images on a Windows PC 4

Software Provided ..................................................................... 4

System Requirements ............................................................... 4

Installing the Software............................................................... 5

Installing the USB Driver ..................................................................5

Installing ACDSee™.........................................................................7

Installing ACD photostitcher ............................................................. 7

Displaying and Copying Images Using ACDSee™................. 8

Panorama Image Stitching with ACD photostitcher............... 9

Disconnecting your Camera from your PC............................ 12

Windows 2000/Me ..........................................................................12

Windows XP ................................................................................... 13

Windows 98/98 SE .........................................................................13

Viewing Images on a Macintosh 14

Software Provided ................................................................... 14

System Requirements ............................................................. 14

Installing the Software............................................................. 14

Installing the USB Driver (Mac OS 8.6 only) ..................................15

Installing ACDSee™ ....................................................................... 15

Displaying and Copying Images Using ACDSee™............... 16

Disconnecting your Camera from your Macintosh............... 17

Contents

WINDOWS

Viewing Images on a Windows PC

You can use the provided USB cable (I-USB2) or a card reader to

transfer your images to the PC, and you can edit and print your images

using the image viewing software. Here, the method for viewing images

with the provided software (S-SW8) is explained.

The following software is included in the CD-ROM (S-SW8) provided.

• USB driver

• Image viewing software (ACDSee™)

• Panorama software (ACD photostitcher)

ACD photostitcher is only for the English version and the

Japanese version.

• OS: Windows 98/98 SE/Me/2000

Windows XP Home Edition/Professional

• CPU: Pentium or higher recommended

• Memory: 64MB minimum

• Hard Disk space: 15MB minimum

• USB port must be standard equipment

To play movie pictures, you need DirectX 8.0 or higher and Media

Player (standard equipment with your OS), or QuickTime 3.0 or higher.

(Media Player alone is sufficient on Windows Me/XP)

You can download DirectX and QuickTime from the following websites.

www.microsoft.com/japan/directx

www.apple.co.jp/quicktime

Software Provided

System Requirements

• The software cannot be used on Windows 95/NT.

• We recommend using the AC Adapter D-AC5 when connecting your

camera to your PC. Your image data could be corrupted if your

batteries run out during image transfer.

WINDOWS

1Install the required software as follows.

1Turn on your PC.

2Place the provided CD-ROM (S-SW8) in your PC

CD-ROM drive.

The [PENTAX Software Installer] screen is displayed.

3Click your applicable language.

The software installation selection

screen is displayed.

You can choose a languages from the

following: English, French, German,

Spanish, Italian and Japanese.

4Click [USB Driver].

The Setup screen is displayed.

Follow the instructions on the screen

to install the software.

5Click [Finish].

After the setup screen closes, reboot

your computer.

Installing the Software

On Windows 2000 or Windows XP, login as an administrator before

installing the software. See your PC user's manual for login instructions.

When the [PENTAX Software Installer] screen is not displayed

Display the [PENTAX Software Installer] screen as follows:

1) Double-click [My Computer] on the Desktop screen.

2) Double-click the CD-ROM drive (S-SW8) icon.

3) Double-click the [Setup.exe] icon.

Installing the USB Driver

WINDOWS

6With the camera turned off, connect the camera to the

PC using the USB cable.

Confirm that the CF card is inserted in the camera.

7Turn on the camera.

The desktop screen will display [Found new hardware] (Windows XP)

or [New Hardware Found] (Windows 98/98SE/2000), and the USB

driver will be installed.

8Double-click [My Computer] on the Desktop screen.

When the installation is complete, the camera is recognized as a

[Removable disk]. Open [My Computer] and confirm that [Removable

Disk] is displayed.

In Windows XP, if the CF card has a volume label, the volume label

name will be displayed instead of [Removable disk]. A new CF card

unformatted on the camera may show the manufacturer name or model

number.

WINDOWS

Once ACDSee™ is installed, you can edit and manage your pictures on

your PC.

Follow steps 1 through 3 on page 5 to display the [PENTAX Software

Installer] screen.

4Click [ACDSee™].

The Setup screen is displayed. Follow the instructions on the screen to

input registration information and install the software. When installation

is complete, reboot your computer.

ACD photostitcher is only for the English version and the Japanese

version.

Once ACD photostitcher is installed, you can view the pictures you took

in Panorama Assist mode as panorama pictures on your PC.

Follow steps 1 through 3 on page 5 to display the [PENTAX Software

Installer] screen.

4Click on [ACD photostitcher].

The Setup screen is displayed. Follow the instructions on the screen

to input registration information and install the software.

When installation is complete, the [PENTAX Software Installer]

screen is displayed again. Click [Exit] to exit the program.

Installing ACDSee™

Installing ACD photostitcher

Confirm that ACDSee™ is installed before installing ACD photostitcher.

WINDOWS

1Turn on your PC.

2With the camera turned off, connect the camera to the

PC using the USB cable.

Confirm that the CF card is inserted in the camera.

3Turn on your camera.

ACDSee™ will start automatically, and display an image list. Proceed

to step 5.

4If ACDSee™ does not start

automatically, double-click

the ACDSee™ icon on the

Desktop screen.

The camera is recognized as a

[Removable Disk] in [My Computer].

The camera images are in the [My

Computer] →[Removable Disk] (or

volume label name if the CF card has one) →[DCIM] →[XXXPENTX]

(XXX is a three-digit number) folder.

An image list is displayed.

5Select an image to view from the image list.

Double-click the image you selected. A full-size image is displayed.

Displaying and Copying Images Using

ACDSee™

WINDOWS

6Copy images to your PC.

Select an image to copy from the image list, and copy it to the

destination folder. For details on copying procedures, see the user’s

manual for your PC.

You can copy images on Explorer as well, which is bundled with

Windows.

ACD photostitcher is only for the English version and the Japanese

version.

With ACDSee™ and ACD photostitcher installed, you can panorama

stitch the images you took in Panorama Assist mode.

The folder and image names displayed on the explanatory screenshots

will differ according to the setup of your PC.

1Run ACDSee™.

2Select the images for panorama stitching from the

image list.

Press the [Ctrl] key on the keyboard while clicking on pictures to

select multiple images.

After selecting the images, click the [ACD photostitcher] button on the

toolbar.

The [ACD photostitcher] button is not enabled if two or more images

are selected.

Panorama Image Stitching with ACD

photostitcher

2 [ACD photostitcher] button

1 Select images

WINDOWS

3Correct the image positioning.

ACD photostitcher starts, and the selected images are displayed in

panorama format.

Move the mouse pointer onto the image. It changes into a esymbol.

Hold down the left mouse button and drag the images to adjust the

stitching position.

When the position is adjusted, click the [STITCH] button.

4Select the stitching method.

You can choose the stitching method from [Big Plane] and [Cylinder].

Here, you will create a flat panorama. Click the [Big Plane] button.

A confirmation message is displayed. Click OK.

2 Click the

[STITCH] button.

1 Click and drag to

adjust position

Click [Big Plane].

Otros manuales para Optio 33L

Tabla de contenidos

Otros manuales de Cámara digital de Pentax

Pentax

Pentax Optio WG2 GPS Manual de usuario

Pentax

Pentax MZ-60 Manual de usuario

Pentax

Pentax K-5 Manual de usuario

Pentax

Pentax QS-1 Manual de usuario

Pentax

Pentax PC35AF-M SE Date Manual de usuario

Pentax

Pentax K-7 Manual de usuario

Pentax

Pentax Silkypix K-500 Manual de usuario

Pentax

Pentax Optio E20 Manual de usuario

Pentax

Pentax Optio 430 Manual de usuario

Pentax

Pentax Optio S55 Manual de usuario

Pentax

Pentax Optio 60 Manual de usuario

Pentax

Pentax P30T Manual de usuario

Pentax

Pentax Optio W60 Manual de usuario

Pentax

Pentax OPTIOA20 - Optio A20 Digital Camera Manual de usuario

Pentax

Pentax ZX-30 Manual de usuario

Pentax

Pentax Data MX Manual de usuario

Pentax

Pentax Optio S5z Manual de usuario

Pentax

Pentax Optio WG2 GPS Manual de usuario

Pentax

Pentax OPTIO VS20 Manual de usuario

Pentax

Pentax PC-300 DATE Manual de usuario

Pentax

Pentax Pentax XG-1 Manual de usuario

Pentax

Pentax OPTIO S4 Manual de instrucciones

Pentax

Pentax K-r Manual de usuario

Pentax

Pentax ES II Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario

Nikon

Nikon Coolpix 100 Manual de usuario

Samsung

Samsung SCC-C4253 Manual de usuario