Pecron E3000 Manual de usuario
FUNCTION INTRODUCTION
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
DC 12V~18V Charging Port
②
DC 32V~95V Charging Port
③
DC 12V/USB/ Wireless Switch
⑤
AC 100V~120V Switch
⑥
DC12V10A Auxiliary Outlet⑦
AC 100V~120V Output
④ DC12V（5525）Output
⑧
①LCD Display ⑨USB-A/USB-C Ports
⑩Wireless Charger
Around 56.2lb
Around 25.5Kg
Max 15W
GX16MF*2 5521*1
SPECIFICATIONS
OUTPUT SPECS
INPUT SPECS
Lithium-ion(NCM)
1000CycleLife＞80%
L16.1*W10*H11.6 in
L409*W256*H297
mm
USB-A*4
5V-2A*3
(5V,9V,12V,
Max 18W)*1
(5V,9V,12V,
Max 18W)*1
(5V,9V,12V,20V,
Max 100W)*1
DC 12V-3A DC 12V-10A
Capacity Battery Type
3108Wh
(25.9V120Ah)
Charging Time Protections
5~6H
(Standard)
2.5~3H
(Fast Charging)
Over-Voltage,
Overheat,
Overload,
Short-Circuit,
Self-Recovery
Temperature
0℃~45℃/32℉~113℉
（Char ging)
-20℃~45℃/-4℉~113℉
（Discharging)
Dimension Net Weight
AC OUT*6
Pure sine wave
100V~120V
Rated 2000W
USB-C*2 DC 5525 Output*2 Cigar Port*1 Wireless Charger*1
DC Charging(32V~95V)
Max1200W(600W*2)
DC Charging(12V~18V)
Max 100W
HOW TO USE THE E3000
LCD SMART DISPLAY
AC Overload Alarm Icon
E3000 can power most devices with power consumption
less than 2000 watts.
If your device is more than 2000W, The AC overload alarm
will flash, The power supply will stop working.
Temperature Alarm Icon
E3000 can power your devices at temperatures ranging
from -20~45℃.
If your working temperature is more than 45℃, the
temperature alarm will flash,the unit may stop working.
DC Out
press and hold to turn on / off DC /USB / Wireless Charger
press and hold to turn on / off AC(
Please turn off the AC
function if there is no AC load on the unit)
DC
AC
DC
AC
Over load
℃
Temperature Alarm
Battery Soc(%)
Voltage(V)
AC Overload Alarm
Charge Indicator
Discharge Indicator
Net Input/Output Wattage
AC Input Wattage(W)/Voltage(V)
AC Out
PF Value/Remaining Charging/
Discharging Time(Hrs)
Time Indicator
MC4 Solar
Charging Cable
pecron 200W
PACKING LIST
RECHARGE TIME
SOLAR CHARGE TIME
Around 5~6 Hours
Around 2.5~3Hours(2 adapters)
※ Includes one AC charger,extra one can be purchased on our website if needed.
Around 5~6 Hours
Around 2.5~3Hours(2 adapters) Around 31Hours
200W(×1) 400W(×2) 600W(×3) 1200W(×6)
23~24 Hours
The solar charging time depends on weather conditions.
E3000 has a built-in MPPT charge controller
that supports 32~95V, 15A PV charging up to 1200W.
11~12 Hours 7~8 Hours 3~4 Hours
Electric Generator Car Charger
Recommended
Recommended Recommended Recommended
800W(×4)
5~6 Hours
Recommended
AC Charger*1
MC4 Solar
Charging
Cable
(LSMC4-5GX16)*2
Car Charging Cable*1
Pecron E300
0*1
Wall Charger
USING SOLAR PANELS TO CHARGE THE E3000
1. 1x DC5521 Charging Port: PV/DC 12V~18V, 100W maximum; VOC(open circuit voltage) of solar panel must be than 25V;
2. 2x GX16MF-5 Charging Port: PV(operating voltage) range 32V~95V, 600W maximum; VOC(open circuit voltage) of
solar panel/array must be than 95V, otherwise, it will damage the unit! Do not wire more than two 36V(AKA 24V)
solar panels in series, or more than four 18V(AKA 12V) solar panels in series.
(18V/36V stands for Vmp, the operating voltage, of the solar panel)
3. If you have any questions, Please feel free to contact us：[email protected]
1x DC5521 Charging Port:
PV12V~18V-100W Maximum Input
2x GX16MF-5 Charging Port:
PV32~95V-600W Maximum Input
Using the pecron 100W /18V*1（100W）to charge the E3000
USING SOLAR PANELS TO CHARGE THE E3000
pecron 100W
18V
pecron 100W*1 ※ 18V is the operating voltage of the solar panels
Using the pecron 200W /36V*1（200W）to charge the E3000
36V 36V
MC4 Solar
Charging Cable*1
※ 36V is the operating voltage of the solar panels
pecron 200W*1
USING SOLAR PANELS TO CHARGE THE E3000
Using the pecron 200W /36V*2（400W）to charge the E3000
MC4 Solar
Charging Cable*1
※ 36V is the operating voltage of the solar panels
pecron 200W*2
36V
36V
72V
Using the pecron 200W /36V*2（400W）to charge the E3000
MC4 Solar
Charging Cable*2
※ 36V is the operating voltage of the solar panels
pecron 200W*2
36V
36V 36V
36V
USING SOLAR PANELS TO CHARGE THE E3000
DO NOT wire three solar panels in series！
Using the pecron 200W /36V*3（600W）to charge the E3000
MC4 Solar
Charging Cable*2
※ 36V is the operating voltage of the solar panels
pecron 200W*3
36V 36V
72V
36V
36V
※ PV(GX16MF-5) Port Only work within 32V~95V Open Circuit voltage,exceeding 95V
will damage the machine.
36V
36V
36V
108V
USING SOLAR PANELS TO CHARGE THE E3000
Using the pecron 200W /36V*4（800W）to charge the E3000
MC4 Solar
Charging Cable*2
※ 36V is the operating voltage of the solar panels
pecron 200W*4
72V
72V
36V
36V
36V
36V
DO NOT wire four solar panels in series！
※ PV(GX16MF-5) Port Only work within 32V~95V Open Circuit voltage,exceeding 95V
will damage the machine.
36V
36V
144V
36V
36V
Otros manuales para E3000
1
Tabla de contenidos
Otros manuales de Generador portátil de Pecron
Pecron
Pecron H600 Manual de usuario
Pecron
Pecron P500 Manual de usuario
Pecron
Pecron E1000 Manual de usuario
Pecron
Pecron E2000 LFP Manual de usuario
Pecron
Pecron E1000 PRO Manual de usuario
Pecron
Pecron S200 Manual de usuario
Pecron
Pecron S1500 Manual de usuario
Pecron
Pecron S500 Manual de usuario
Pecron
Pecron S400 Manual de usuario
Pecron
Pecron P-II Manual de usuario
