Pecron E2000 LFP Manual de usuario
E2000
LFP
FUNCTION INTRODUCTION
⑪
DC 12V~18V Charging Port
②DC 32V~95V Charging Port
③
DC 12V/USB/ Wireless Switch
⑤AC 100V~120V Switch
⑥
DC12V Auxiliary Output
⑦
AC 100V~120V Output
④
DC12V(5525)Output
⑧
①LCD Display
⑨USB-A/USB-C Ports
⑩Wireless Charger ⑪Battery Expansion Port
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
OUTPUT SPECS
INPUT SPECS
Pure sine wave
100V~120V
Rated 2000W
DC 12V-10A
Cigar Port*1
Max 15W
Wireless Charger*1
GX16MF*2
DC Charging(32V~95V)
Max 1200W(600W*2)
5521*1
DC Charging(12V~18V)
Max 100W
Around 48.5lb
Around 22Kg
SPECIFICATIONS
LiFePO4 Battery
Retain 80%+
Original Capacity
At 3500 Cycles
L16.1*W10*H11.6 in
3.5~4H
(Standard)
1.5~2H
(Fast Charging)
1920Wh
(25.6V75Ah)
Over-Voltage,
Overheat,
Overload,
Short-Circuit,
Self-Recovery
L409*W256*H297
mm
Capacity Battery Type Charging Time Protections Temperature
0℃~45℃/32℉~113℉
(Charging)
-20℃~45℃/-4℉~113℉
(Discharging)
AC Out
(5V,9V,12V,
Max 18W)*1
(5V,9V,12V,20V,
Max 100W)*1
USB-C*2
Dimension Net Weight
5V-2A*3
(5V,9V,12V,
Max 18W)*1
USB-A*4
DC 12V-3A
DC 5525 Output*2
E2000
LFP
E2000
LFP
HOW TO USE THE E2000 LFP
LCD SMART DISPLAY
AC Overload Alarm Icon
E2000 LFP can power most devices with power
consumption less than 2000 watts.
If your device is more than 2000W, The AC overload alarm
will flash, The power supply will stop working.
Temperature Alarm Icon
E2000 LFP can power your devices at temperatures
ranging from -20~45℃.
If your working temperature is more than 45℃, the
temperature alarm will flash,the unit may stop working.
Time Indicator
DC Out
AC Out
press and hold to turn on / off DC /USB / Wireless Charger
press and hold to turn on / off AC(
Please turn off the AC
function if there is no AC load on the unit)
DC
AC
DC
AC
Over load
℃
Temperature Alarm
Battery Soc(%)
AC Overload Alarm
Charge Indicator
Discharge Indicator
Net Input/Output Wattage
AC Input Wattage(W)/Voltage(V)
PF Value/Remaining Charging/
Discharging Time(Hrs)
Voltage(V）
E2000
LFP
EXPANDABLE BATTERY
Require Pecron battery expansion cable to expand
the capacity by adding extra Pecron 24V battery.
Do not expand with any battery modules other than
the Pecron's, this could damage the unit!
AC Charger*1
PACKING LIST
RECHARGE TIME
MC4 Solar
Charging
Cable
(LSMC4-5GX16)*2
※Includes one AC charger,extra one can be purchased on our website if needed.
Around 3.5~4 Hours
Around 1.5~2Hours(2 adapters)
Electric Generator
Around 20Hours
Car Charger
Around 3.5~4 Hours
Around 1.5~2Hours(2 adapters)
Car Charging Cable*1
SOLAR CHARGE TIME
Pecron E2000 LFP
*1
E2000
LFP
MC4 Solar
Charging Cable
pecron 200W
200W(×1) 400W(×2) 600W(×3) 1200W(×6)
15~16 Hours
The solar charging time depends on weather conditions.
E3000 has a built-in MPPT charge controller
that supports 32~95V, 15A PV charging up to 1200W.
7~8 Hours 5~6 Hours 2~3 Hours
Recommended
Recommended Recommended Recommended
800W(×4)
3~4 Hours
Recommended
Wall Charger
E2000
LFP
USING SOLAR PANELS TO CHARGE THE E2000 LFP
1. 1x DC5521 Charging Port: PV/DC 12V~18V, 100W maximum; VOC(open circuit voltage) of solar panel must be than 25V;
2. 2x GX16MF-5 Charging Port: PV(operating voltage) range 32V~95V, 600W maximum; VOC(open circuit voltage) of solar
panel/array must be than 95V, otherwise, it will damage the unit! Do not wire more than two 36V(AKA 24V) solar
panels in series, or more than four 18V(AKA 12V) solar panels in series.
(18V/36V stands for Vmp, the operating voltage, of the solar panel)
3. If you have any questions, Please feel free to contact us：[email protected]
1x DC5521 Charging Port:
PV12V~18V-100W Maximum Input
2x GX16MF-5 Charging Port:
PV32~95V-600W Maximum Input
Using the pecron 200W /36V*1（200W）to charge the E2000 LFP
Using the pecron 100W /18V*1（100W）to charge the E2000 LFP
18V
USING SOLAR PANELS TO CHARGE THE E2000 LFP
pecron 100W
pecron 100W*1 ※ 18V is the operating voltage of the solar panels
36V 36V
MC4 Solar
Charging Cable*1
※ 36V is the operating voltage of the solar panels
pecron 200W*1
USING SOLAR PANELS TO CHARGE THE E2000 LFP
Using the pecron 200W /36V*2（400W）to charge the E2000 LFP
Using the pecron 200W /36V*2（400W）to charge the E2000 LFP
MC4 Solar
Charging Cable*1
※ 36V is the operating voltage of the solar panels
pecron 200W*2
36V
36V
72V
MC4 Solar
Charging Cable*2
※ 36V is the operating voltage of the solar panels
pecron 200W*2
36V
36V 36V
36V
USING SOLAR PANELS TO CHARGE THE E2000 LFP
Using the pecron 200W /36V*3（600W）to charge the E2000 LFP
MC4 Solar
Charging Cable*2
※ 36V is the operating voltage of the solar panels
pecron 200W*3
36V 36V
72V
36V
36V
DO NOT wire three solar panels in series！
※PV(GX16MF-5) Port Only work within 32V~95V Open Circuit voltage,exceeding 95V
will damage the machine.
36V
36V
36V
108V
Otros manuales para E2000 LFP
1
Tabla de contenidos
Otros manuales de Generador portátil de Pecron
Pecron
Pecron P-II Manual de usuario
Pecron
Pecron P600 Manual de usuario
Pecron
Pecron S500 Manual de usuario
Pecron
Pecron H600 Manual de usuario
Pecron
Pecron E1000 Manual de usuario
Pecron
Pecron P500 Manual de usuario
Pecron
Pecron S1500 Manual de usuario
Pecron
Pecron S400 Manual de usuario
Pecron
Pecron Q2000S Manual de usuario
Pecron
Pecron E3000 Manual de usuario
Pecron
Pecron E1500 PRO Manual de usuario
Pecron
Pecron S200 Manual de usuario
Pecron
Pecron S1500 Manual de usuario
Pecron
Pecron S500 Manual de usuario
Pecron
Pecron E3000 Manual de usuario
Pecron
Pecron E1000 PRO Manual de usuario
Pecron
Pecron E600 LFP Manual de usuario
Pecron
Pecron EB3000-24V Manual de usuario
