PCchips M771LMR 1.x Manual de usuario

Important Information

This publication, including all photographs, illustrations and software, is

Neither this manual, nor any of the material contained herein, may be

reproduced without the express written consent of the manufacturer.

Disclaimer

The information in this document is subject to change without notice. The

manufacturer makes no representations or warranties with respect to the

contents hereof and specifically disclaims any implied warranties of

merchantability or fitness for any particular purpose. Further, the

manufacturer reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of the

manufacturer to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft

Corp.

MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered

trademarks of Intel Corporation.

VGA, OS/2, PS/2 are registered trademarks of International Business

Machines.

AMD, K5, K6 are registered trademarks of Advanced Micro Devices Inc.

Cyrix, M1 are registered trademarks of Cyrix Corporation.

Other product names used in this manual are the properties of their

respective owners and are acknowledged.

Version 1.0

Safety Compliance

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and the receiver.

 Connect the equipment onto an outlet on a circuit different from that

to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables and shielded AC power cable must be

employed with this equipment to insure compliance with the pertinent RF

emission limits governing this device. Changes or modifications not

expressly approved by the system’s manufacturer could void the user’s

authority to operate the equipment.

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is subject

to the following conditions:

 This device may not cause harmful interference, and

 This device must accept any interference received, including

interference that may cause undesired operation.

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Canadian

Interference-causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du

Réglement sur le matériel brouilieur du Canada.

Contents

Chapter 1: Introduction.............................................. 1

Welcome....................................................................... 1

About the Manual.......................................................... 2

Checklist ....................................................................... 3

Standard Items------------------------------------------------- 3

Recommendations........................................................ 3

Features........................................................................ 4

Chapter 2: Installation................................................ 7

Quick Installation Table ................................................ 7

Quick Jumper Setting Reference ................................. 8

Before You Begin.......................................................... 10

Static Electricity------------------------------------------------ 10

Choosing a Case---------------------------------------------- 10

How to Set Jumpers ------------------------------------------ 11

Preparing the Mainboard .............................................. 12

Mainboard Guide---------------------------------------------- 12

I/O Ports Side View ------------------------------------------- 14

Check the Jumper Settings --------------------------------- 15

Install the Mainboard in the Case................................. 17

Connecting Power, Chassis Fans,

and Switches and Indicators ------------------------------- 19

Install Other Hardware.................................................. 21

Install the Processor------------------------------------------ 21

Installing a Socket-370 Processor ------------------------ 22

Install the Memory Modules -------------------------------- 24

Install a Hard Disk Drive and CD-ROM------------------ 25

Installing a Floppy Diskette Drive ------------------------- 27

Using the Expansion Slots ---------------------------------- 29

Add-in Card Options------------------------------------------ 30

Install Options and Extension Brackets------------------ 31

Make the External Connections ................................... 35

External Connector Color Coding ------------------------- 36

Chapter 3: Setup......................................................... 37

About the Setup Utility .................................................. 37

Starting the Setup Utility------------------------------------- 37

How to Flash a New BIOS ---------------------------------- 39

Standard CMOS Features Option ................................ 40

Advanced BIOS Features Setup Option....................... 42

Advanced Chipset Features Option ............................. 45

Integrated Peripherals Option....................................... 47

Power Management Setup Option ............................... 50

PNP/PCI Configuration Option ..................................... 53

PCI Health Status Option ............................................. 54

Frequency Control Option ............................................ 55

Load Fail-Safe Defaults Option .................................... 56

Load Optimized Defaults Option................................... 56

Set Supervisor and User Passwords............................ 56

Save And Exit Setup Option ......................................... 57

Exit Without Saving Option........................................... 57

Chapter 4: Software.................................................... 58

About the Software ....................................................... 58

Folders for this Mainboard............................................ 58

Running the Support CD-ROM..................................... 60

Utility Folder Installation Notes ..................................... 60

CMI8X38 Folder Installation Notes............................... 61

Audio Software -------------------------------------------------61

Modem Driver and Software --------------------------------62

Peripheral Folder Installation Notes ............................. 62

Intel Folder Installation Notes ....................................... 62

Mainboard (KOB 810e FSFx) Installation Notes ......... 63

Appendix 1: Quick Jumper Setting Reference ........ 64

Welcome

Congratulations on purchasing the KOB 810e FSFx mainboard.

The KOB 810e FSFx mainboard is a Flex-ATX mainboard that uses 4-

layer printed circuit board and measures 228mm x 190mm. The

mainboard has a socket-370 processor socket. This feature means

that you can install the mainboard with a PPGA Celeron or FC-PGA

Coppermine processor. The KOB 810e FSFx is installed with the

enhanced Intel 810e chipset. The mainboard has built-in 3D graphics,

3D sound, and a V.90 modem. Two 32-bit PCI expansion slots are

provided plus a TV-Out/LCD Panel Riser slot. Two DIMM sockets are

available for the installation of up to 512 MB SDRAM memory. This

mainboard is an ideal platform for an inexpensive entry level or business

class multimedia personal computer.

This chapter contains the following information:

 About the Manual explains how the information in this manual is

organized

 Checklist comprises a list of the standard and optional components

that are shipped with this mainboard

 Recommendations lists some Do’s and Don’ts from the

manufacturer to help ensure reliability and performance from this

product

 Features highlights the functions and components that make this

one of the best value mainboards on the market

About the Manual

The manual consists of the following chapters:

Introduction

Use the Introduction Chapter to learn about the features of the

mainboard, and the checklist of items that are shipped with the package.

Installation

Use the Installation Chapter to learn how to install the mainboard and

get your system up and running.

Setup

Use the Setup Chapter to configure the mainboard for optimum

performance.

Software

Use the Software Chapter to learn how to use the software drivers and

support programs that are provided with this mainboard.

Checklist

Compare the contents of your mainboard package with the standard

checklist below. If any item is missing or appears damaged, please

contact the vendor of your mainboard package.

Standard Items

 1 x KOB 810e FSFx Mainboard

 1 x Cable/Bracket Pack

Diskette drive ribbon cable

IDE drive ribbon cable

 This User’s Manual

 Software Support CD-ROM Disc

Optional items

 1 x V.90 Fax/modem Card

 1 x TV-Out Riser Card

Recommendations

This mainboard automatically determines the CPU clock frequency and

system bus frequency for the kind of processor that you install. You may

be able to change these automatic settings by making changes to

jumpers on the mainboard, or changing the settings in the system setup

utility. We strongly recommend that you do not overclock the mainboard

to run processors or other components faster than their rated speed.

Overclocking components can adversely affect the reliability of the

system and introduce errors into your system. Overclocking can

permanently damage the mainboard by generating excess heat in

components that are run beyond the rated limits.

Components on this mainboard can be damaged by discharges of static

electricity. Handle the board carefully holding it by the edges. Don’t flex

or stress the circuit board. Keep the board in its static-proof packing until

you are ready to install it. Follow the static guidelines given at the

beginning of Chapter 2.

Features

The key features of this mainboard are the wide range of processors that

can be installed, and the high level of integration which includes built-in

audio, video, and communications.

Value-class Processors

As a platform for a value PC, the KOB 810e FSFx includes a socket-370

for the installation of the latest PGA and FC-PGA packaging processors

form Intel.

The PGA Celeron processors ship in the familiar square plastic package,

and they install in a Zero Insertion Force (ZIF) socket called Socket-370.

These PGA Celeron processors are close to Pentium II performance

because they include a level-2 cache memory of 128K. However, they

operate over a 66MHz system bus and they currently ship at clock

speeds of up to 533MHz. The PGA Celeron is the premiere choice for

an entry-level PC.

The FC-PGA Coppermine processor operates over a 66, 100 or 133

MHz system bus. The FC-PGA Coppermine ships with clock speeds

running from 500 MHz through to 750 MHz.

The KOB 810e FSFx supports 66MHz (PGA Celeron) as well as 100

MHz and 133 MHz front side buses (FC-PGA Coppermine).

Intel’s 810e Chipset

This board features 810e chipsets from Intel. The 810e chipset is

designed to reduce the cost and improve the multimedia capability of

value PCs. The chipset features an integrated AGP (Accelerated

Graphics Port) graphics controller that is optimized to produce smooth

rendition of 2D and 3D video. Digital video output is supported so that

the system can display on a TV or a flat-panel display with digital video

input. The graphics controller improves performance and reduces cost

by dynamically allocating a segment of active memory as video memory.

The 810e I/O chip (82801 I/O Controller Hub) makes a direct connection

between the graphics system and the IDE controller and the PCI bus. It

uses Accelerated Hub Architecture to effectively double the bandwidth

between these components enabling more life like audio and video. It

includes an integrated Audio-Codec controller (AC97) that lets the

processor more effectively decode sound generated by the integrated

audio system or the integrated fax/modem. Finally, the 82802AB

Firmware Hub allows the system and video BIOS to be stored

(eliminating the need for non-volatile CMOS memory) for faster

execution, and provides a random number generator to enable strong

encryption routines.

Inexpensive Memory

The board has two DIMM sockets for the installation of 168-pin, 3.3V

non-buffered DIMM memory modules. The DIMM memory modules must

be installed with SDRAM memory chips. The KOB 810e FSFx board

supports a memory bus of 100 MHz and 133 MHz. Each installed

memory module can be populated with 8 MB up to 256 MB of memory,

so a maximum total of 512 MB memory can be installed. The integrated

video system uses a shared memory architecture so that you must

reserve some of the installed memory as video memory using the

system BIOS. You must install at least one memory module, and the first

memory module is installed in DIMM1.

Highly Integrated Design

As well as the Intel 810e chipset, the KOB 810e FSFx features other

highly integrated silicon chips. The ITE LPC I/O controller handles the

mainboard’s I/O functions. The CMI 8738/PCI C3DX is a two-chip

solution that provides an integrated audio and fax/modem system.

Built-in AGP 3D-Graphics

The Intel 810e chipset includes an integrated AGP controller that is

optimized for smooth 2D and 3D video. The graphics system shares

active memory and does not require dedicated video memory. Video is

delivered through a regular 15-pin connector.

Built-in PCI 3D Sound

The PCI Audio CMI 8738 is a single chip solution for PCI-bus 3D audio.

The chip provides Sound Blaster 16-bit-compatible audio, plus support

for Microsoft’s DirectSound 3D specification and Aureal A3D interface.

The sound ports include jacks for speakers, microphone and stereo in,

and a game/MIDI port. The audio system supports full duplex operation

and drivers are available for WIN 95/98 and WIN NT 4.0. The audio

system can output sound to 4 loudspeakers.

Built-in V.90 Fax/modem (DAA Module is optional)

The KOB 810e FSFx mainboard has a built-in 56 Kbps fax/modem that

supports the V.90 protocol. The chip is integrated with the built-in audio

system to support voice as well as data transmissions. In order to use

the built-in fax/modem, you must install a DAA module that supplies the

RJ11 sockets for LINE and TELEPHONE.

Expansion Options

The KOB 810e FSFx mainboard is pre-installed with features such as

audio, video and an optional DAA module for a modem, that normally

require add-in cards, so the two 32-bit PCI slots provide plenty of

expansion potential. The KOB 810e FSFx PCI slots support UDMA 66

bus mastering. The mainboard also has TV-Out and LCD Riser slot for

exporting the system video output to an external TV receiver or LCD

panel.

Integrated I/O

The mainboard has a full set of I/O ports and connectors. The I/O

template on the backplane includes two PS/2 ports for mouse and

keyboard, one serial port, one parallel port, one VGA monitor port, one

game/MIDI port, two USB ports and audio jacks for microphone, line-in

and line-out. The board has a header for the optional installation of an IR

port, and second serial port. The board includes two PCI IDE channels

and a floppy disk drive interface.

Keyboard Power On Feature

Using the system BIOS setup program, you can configure the system to

turn on using a keyboard-typed password. A green keyboard is not

required.

Programmable Firmware

The mainboard includes Award BIOS that allows BIOS setting of CPU

parameters. The fully programmable firmware enhances the system

features and allows users to set power management, CPU and memory

timing, LAN and modem wake-up alarms, and so on. The firmware can

also be used to set parameters for different Celeron processor clock

speeds so that you don’t need to change mainboard jumpers and

switches.

Tabla de contenidos

Otros manuales de Placa madre de PCchips

PCchips

PCchips P53G Series Manual de usuario

PCchips

PCchips M939LU Manual de usuario

PCchips

PCchips A15G Series Manual de usuario

PCchips

PCchips M596 Manual de usuario

PCchips

PCchips M598LMR Manual de usuario

PCchips

PCchips A32G Manual de usuario

PCchips

PCchips M758 Plus Series Manual de usuario

PCchips

PCchips Motherboard Manual de usuario

PCchips

PCchips M935ALU Manual de usuario

PCchips

PCchips A11G Manual de usuario

PCchips

PCchips M757MR Manual de usuario

PCchips

PCchips M932LR Manual de usuario

PCchips

PCchips M922ULR Manual de usuario

PCchips

PCchips M930LR Manual de usuario

PCchips

PCchips M938 Series Manual de usuario

PCchips

PCchips M758LMT Manual de usuario

PCchips

PCchips A41G V7.0 Manual de usuario

PCchips

PCchips M726MRT Manual de usuario

PCchips

PCchips M902 Series Manual de usuario

PCchips

PCchips P51G Series Manual de usuario

PCchips

PCchips M825 Series Manual de usuario

PCchips

PCchips MB694A Manual de usuario

PCchips

PCchips M927 Series Manual de usuario

PCchips

PCchips Motherboard Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario