PCchips M596 Manual de usuario

The information presented in this publication has been

carefully checked for reliability; however, no

responsibility is assumed for inaccuracies.

Specifications are subject to change without notice.

Trademarks

PS/2,OS/2,IBM,PC/AT, and PC/XT are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

AMD is a trademark of Advanced Micro Devices Inc.

Cyrix is a trademarks of Cyrix Corporation.

IDT is a trademark of Integrated Devices Technology Corporation.

AMI is a trademark of American Megatrends Inc.

MS-DOS and Windows 95/98/NT are registered trademarks of Microsoft

Corporation

PC-cillin and ChipAwayVirus are trademarks of Trend Micro, Inc.

M596, Version 1.3

October 1998

Notice : ................................................................................................. 4

Chapter 1: Introduction ....................................................................... 5

Key Features ..................................................................................... 6

Unpacking the Mainboard & Static Electricity Precautions ............... 8

Chapter2: Hardware Configuration .................................................... 9

Mainboard Component Locations .................................................... 10

Connectors ...................................................................................... 10

CN7 - ATX Style Power Connector ............................................. 11

Software Power-Off .................................................................... 11

Modem Ring Power-On .............................................................. 11

CN11(PWRSW) - Power Button Connector ................................ 12

CN10 - VGA Connector ............................................................. 12

External Connectors Location .................................................... 12

CN8 - Floppy Disk Port .............................................................. 12

IDE1/IDE2 - Primary/Secondary IDE Ports ................................ 12

CN11(PWRLED & K-LOCK) - Power LED & Keylock

Connector .................................................................................. 13

CN11(SPK) - Speaker Connector ................................................ 13

CN11(TB LED) - Turbo LED Connector .................................... 13

CN11(HDD LED) - HDD LED Connector .................................. 13

CN11(RST) - Reset Switch Connector ........................................ 14

JP4 - Infrared Connector ............................................................ 14

J1 - Fan Power Connector .......................................................... 14

Sound Pro Connectors ..................................................................... 15

J2/J3 - Analog Audio from CD-ROM ......................................... 15

Sound and Game(on the External Connectors) ........................... 15

JP6 - Digital Audio IN ............................................................... 15

JP5 - Digital Audio OUT ............................................................ 15

ii Contents

Notice for Sound Pro drivers install and application ...................16

Jumper Settings ............................................................................... 17

JP8 - CMOS RAM Clear Selector ...............................................17

JP1 - DIMM Voltage Selectors ....................................................17

JP7 - Onboard Sound Selector .................................................... 17

Memory Installation ........................................................................ 18

Chapter3: BIOS Setup ....................................................................... 19

Entering BIOS Setup........................................................................ 20

Default............................................................................................. 20

Load Optimal Settings................................................................. 20

Load Best Performance Settings.................................................. 21

BIOS Setup...................................................................................... 21

Standard CMOS Setup................................................................ 21

Advanced CMOS Setup............................................................... 22

Advanced Chipset Setup.............................................................. 24

Power Management Setup........................................................... 25

PCI / Plug and Play Setup........................................................... 27

Peripheral Setup.......................................................................... 29

CPU Plug and Play Setup............................................................ 30

Change Supervisor Password.......................................................31

Auto-Detect Hard Disks.............................................................. 31

Save Settings and Exit................................................................. 31

Exit Without Saving.................................................................... 31

iii

Notice :

Make sure the CMOS Clear jumper is set to

Normal mode before use.

The shipped mainboard is set to Clear CMOS

that will be not boot up the system.

See CMOS Clear Selector in Jumper Settings

section!

Chapter 1

Introduction

This mainboard is a high-performance mainboard

based on the advanced Pentiumª microprocessor and

featuring PCI Local Bus and the high-end chipset. The

mainboard offers a high degree of flexibility in

configuration and is fully IBM PC/AT compatible.

The advanced features of this mainboard include:

Supports P54C/P55C (MMX) Pentium® CPUs and Cyrix/IBM

6x86L/6x86MX/MII, AMD K6/K6-2, IDT C6 CPUs with

Frequency at 50/55/60/66/75 MHz.

Provides CPU Plug and Play feature for faster and easier CPU

installation.

Provides 2 DIMMs for SDRAM/EDO/FP memory modules.

Supports a maximum size of 512MB system memory.

Onboard 64-bit 512KB L2 cache.

Provides 3 PCI and 1 ISA slots, supports 5V PCI bus Interface.

Onboard 2 channel IDE,

- maximum four IDE devices support.

- supports PIO, PCI Bus Master and Ultra DMA/33 operation modes.

Provides ATX power connectors and features of ATX power,

- Power Button Power On.

- Modem Wake Up.

Onboard 64-bit VGA Graphics Accelerator,

- high performance 64-bit GUI accelerator with excellent video

playback capability.

- system memory shares up to 4MB with frame buffer.

- high resolution graphic modes up to 1024x768.

Key Features

6Chapter 1

Onboard 3D Sound Pro meets PC98' specifications,

- supports both Sound Blaster 16/Pro and Windows Sound System.

- supports HRTF 3D Positional Audio technology.

- provides drivers for Windows Direct Sound 3D.

- provides drivers for 3D games that use Aureal software interface.

- Digital Audio Interface(SPDIF) IN/OUT.

- Software Wave-table Synthesizer.

- full Duplex 16-bits CODEC with filters.

- Stereo Mixer supports analog mixing from CD-Audio, Line-In,

and digital mixing from voice, FM/Wave-table and digital CD-

Audio.

Onboard Multi-I/O and Peripheral interface, include:

- 1 floppy port with 1 Mb/s transfer rate.

- 2 serial ports with 16550 compatible Fast UART.

- 1 parallel port with EPP and ECP capabilities.

- 2 USB ports & PS/2 keyboard/mouse ports.

- 1 IR interface.

Onboard 2M Flash ROM supports complete ACPI and Legacy PMU

and is fully compatible with PC97 and PC98.

BIOS provides Plug & Play function which detects the peripheral

devices and expansion cards automatically.

Supports Trend’s ChipAwayVirus option to ensure the entire boot

process is virus free, no installation and configuration worries.

Bundled PC-cillin98 (OEM) provides automatic virus protection

for Windows 95/98 and the Internet.

Dimension: Micro ATX Form Factor, 24.4cm(L) x 19cm(W).

Introduction 7

8Chapter 1

This mainboard package contains the following items:

1. The mainboard & device driver

2. This user's guide

3. SPDIF/IN cable

4. AT cables

5. VGA cable/bracket

The mainboard is easily damaged by static electricity.

Follow the precautions below while unpacking or installing

the mainboard.

1. Do not remove the mainboard from its original package

until you are ready to install it.

2. Frequently ground yourself to discharge any static

electric charge that may build up in your body while

working on installation and/or configuration. For

example, you may ground yourself by grasping an

unpainted portion of the system's metal chassis.

3. Remove the mainboard from its anti-static packaging

and place it on a grounded surface, component side up.

4. Handle the mainboard by its edges or by the mounting

bracket to avoid touching its components.

5. Check the mainboard for damage. If any integrated

circuit appears loose, press carefully to seat it firmly in

its socket.

6. Do not apply power if the mainboard appears damaged.

If there is damage to the board contact your dealer

immediately.

Unpacking & Static Electricity Precautions

Chapter 2

Hardware Configuration

Before you install this mainboard into the system

chassis, you may find it convenient to first configure

the mainboardÕs hardware. This chapter describes how

to set jumpers and install memory modules, and where

to attach components.

Chapter 2

Mainboard Component Locations

Figure 2-1. Mainboard Component locations

PCI -1 1

SPK

PWRLEDK-LOCK TB

LED HDD

LED

CN11

JP5

PCI -2PCI -3

PS/2-KBD

PS/2-Mouse

USB(T)

USB(B)

Chipset

BIOS

DIMM1

3.3V

12V

DIMM2

JP8

Sound

Line out Line inMIC

GAME1

IDE1

IDE2

COM2 COM1

PRN1

JP1

JP4

JP7

CN10

JP2

Socket 7

I/O

J3 J2

JP6

RST

PWR

Connectors

Note: Make sure that the power is turned off before making

any connection to the board.

Attach system components and case devices to the

mainboard via the mainboard connectors. A description

of each connector follows. See Figure 2-1 for the location

of the connectors on the mainboard.

CN8 CN7

Tabla de contenidos

Otros manuales de Placa madre de PCchips

PCchips

PCchips M728 Manual de usuario

PCchips

PCchips M930LR Manual de usuario

PCchips

PCchips M581 Series Manual de usuario

PCchips

PCchips Motherboard Manual de usuario

PCchips

PCchips M812 Series Manual de usuario

PCchips

PCchips M922ULR Manual de usuario

PCchips

PCchips M766LMRT Manual de usuario

PCchips

PCchips M848LU Manual de usuario

PCchips

PCchips M750 Manual de usuario

PCchips

PCchips Motherboard Manual de usuario

PCchips

PCchips M902 Series Manual de usuario

PCchips

PCchips M848ALU Manual de usuario

PCchips

PCchips M757MR Manual de usuario

PCchips

PCchips A11G Manual de usuario

PCchips

PCchips M925 Series Manual de usuario

PCchips

PCchips M787CLR Manual de usuario

PCchips

PCchips M811LU Manual de usuario

PCchips

PCchips M925ALU Manual de usuario

PCchips

PCchips M825 Series Manual de usuario

PCchips

PCchips M935L Manual de usuario

PCchips

PCchips M575V12 Manual de usuario

PCchips

PCchips A16 Manual de usuario

PCchips

PCchips K7S5A Manual de usuario

PCchips

PCchips M756T Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario