Patton electronics 2703RC Manual de usuario

USER

MANUAL

MODEL 2703RC

MegaLink-1™

G.703/E1

Digital Modem:

Rack Mount Card

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

http://www.patton.com

Part# 07M2703RC-C

Doc# 031121U, Rev. D

Revised 1/23/08

Dear Valued Customer,

Thank you for purchasing Patton Electronics products! We do

appreciate your business. I trust that you find this user manual helpful.

We manufacture one of the widest selections of data communica-

tions products in the world including CSU/DSU's, network termination units,

powered and self-powered short range modems, fiber optic modems, interface

converters, baluns, electronic data switches, data-line surge protectors, multi-

plexers, transceivers, hubs, print servers and much more. We produce these

products at our Gaithersburg, MD, USA, facility, and can custom manufacture

products for your unique needs.

We would like to hear from you. Please contact us in any of the fol-

lowing ways to tell us how you like this product and how we can meet your

product needs today and in the future.

Web: http://www.patton.com

Sales E-mail: [email protected]

Support E-mail: [email protected]

Phone - Sales (301) 975-1000

Phone - Support (301) 975-1007

Fax: (301) 869-9293

Mail: Patton Electronics Company

7622 Rickenbacker Drive

Gaithersburg, MD 20879 USA

We are committed to a quality product at a quality price. Patton

Electronics is ISO 9001 certified. We meet and exceed the highest

standards in the industry (CE, UL, etc.).

It is our business to serve you. If you are not satisfied with any

aspect of this product or the service provided from Patton Electronics or its

distributors, please let us know.

Thank you.

Burton A.Patton

Vice President

P.S. Please tell us where you purchased this product.

_________________________________________________________

An ISO-9001

Certified Company

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 2703RC components to be

free from defects, and will—at our option—repair or replace the product

should it fail within one year from the first date of shipment.

This warranty is limited to defects in workmanship or materials,

and does not cover customer damage, abuse or unauthorized modifica-

tion. If this product fails or does not perform as warranted, your sole

recourse shall be repair or replacement as described above. Under no

condition shall Patton Electronics be liable for any damages incurred

by the use of this product. These damages include, but are not limited

to, the following: lost profits, lost savings and incidental or consequen-

tial damages arising from the use of or inability to use this product.

Patton Electronics specifically disclaims all other warranties,

expressed or implied, and the installation or use of this product shall be

deemed an acceptance of these terms by the user.

1.1 RADIO AND TV INTERFERENCE

The Model 2703RC generates and uses radio frequency energy,

and if not installed and used properly—that is, in strict accordance with

the manufacturer’s instructions—may cause interference to radio and

television reception. The Model 2703RC has been tested and found to

comply with the limits for a Class A computing device in accordance

with the specifications in Subpart J of Part 15 of FCC rules, which are

designed to provide reasonable protection from such interference in a

commercial installation. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If the Model 2703RC

does cause interference to radio or television reception, which can be

determined by turning the power off or removing the card, the user is

encouraged to try to correct the interference by one or more of the fol-

lowing measures: moving the computing equipment away from the

receiver, re-orienting the receiving antenna and/or plugging the receiv-

ing equipment into a different AC outlet (such that the computing equip-

ment and receiver are on different branches). In the event the user

detects intermittent or continuous product malfunction due to nearby

high power transmitting radio frequency equipment, the user is strongly

advised to take the following steps: use only data cables with an exter-

nal outer shield bonded to a metal or metalized connector; and,

Configure the rear card as shown in section 3.2 of this manual.

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates

that it is in compliance with the Electromagnetic Compatibility (EMC)

directive and the Low Voltage Directive (LVD) of the Union European

(EU). A Certificate of Compliance is available by contacting Technical

Support.

1.3 SERVICE

All warranty and nonwarranty repairs must be returned freight pre-

paid and insured to Patton Electronics. All returns must have a Return

Materials Authorization number on the outside of the shipping contain-

er. This number may be obtained from Patton Electronics Technical

Support: (301) 975-1007;http://www.patton.com;or,support@pat-

ton.com.

NOTE: Packages received without an RMA number will not be

accepted.

Patton Electronics' technical staff is also available to answer any

questions that might arise concerning the installation or use of your

Model 2703RC. Technical Service hours: 8AM to 5PM EST, Monday

through Friday.