Patton electronics 2173R Manual de usuario

USER

MANUAL

MODEL 2173R

Ruggedized High Speed

Ethernet Extender

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07M2173R-UM

Rev. A

Revised 6/13/11

An ISO-9001Certified

Company

CONTENTS

1.0 Warranty Information ................................................................. 4

1.1 Compliance................................................................................... 4

EMC Compliance:......................................................................... 4

Low-Voltage Direcive (Safety):..................................................... 4

PSTN:........................................................................................... 4

1.2 Radio and TV Interference (FCC Part 15) .................................... 4

1.3 CE Declaration of Conformity....................................................... 5

1.4 Authorized European Representative........................................... 5

1.5 Service.......................................................................................... 5

1.6 Safety When Working With Electricity .......................................... 6

2.0 General Information.................................................................... 8

2.1 Features........................................................................................ 8

2.2 Description.................................................................................... 8

3.0 Installation................................................................................... 9

3.1 Connecting the Twisted-Pair Line Interface................................ 10

3.2 Connecting the 10/100Base-T Ethernet Interface ...................... 11

3.3 Connecting Power ...................................................................... 12

4.0 Configuration ............................................................................ 12

4.1 Configuring the hardware DIP switches...................................... 12

4.2 Configuring DIP Switch S1 ......................................................... 14

5.0 Operation................................................................................... 14

5.1 Power Up.................................................................................... 14

5.2 Front Panel LED Status Monitors............................................... 15

Specifications ........................................................................... 16

A.1 LAN Connection ......................................................................... 16

A.2 Transmission Line ....................................................................... 16

A.3 CopperLINK Line Rate and CopperLINK Distance .................... 16

A.4 LED Status Indicators ................................................................. 16

A.5 Power Supply .............................................................................. 16

A.6 Temperature Range .................................................................... 16

A.7 Humidity ...................................................................................... 16

A.8 Dimensions ................................................................................. 16

Model 2173R Factory

Replacement Parts and Accessories...................................... 17

Model 2173R Interface Pin Assignment.................................. 18

C.1 10/100Base-T Interface .............................................................. 18

RJ-45.......................................................................................... 18

C.2 CopperLINK Interface ................................................................ 18

RJ-45.......................................................................................... 18

Sample Rates/Distance Chart, Based on 24 AWG (0.5 MM) . 19

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 2173R components to be free

from defects, and will—at our option—repair or replace the product

should it fail within one year from the first date of the shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modification. If this

product fails or does not performs as warranted, your sole recourse shall

be repair or replacement as described above. Under no condition shall

Patton Electronics be liable for any damages incurred by the use of this

product. These damages include, but are not limited to, the following: lost

profits, lost savings and incidental or consequential damages arising

from the use of or inability to use this product. Patton Electronics spe-

cifically disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

Note Conformity documents of all Patton products can be viewed

online at www.patton.com under the appropriate product page.

1.1 COMPLIANCE

EMC Compliance:

• FCC Part 15, Class A

• EN55022, Class A

• EN55024

• A-tick

Low-Voltage Direcive (Safety):

• IEC/EN60950-1, 2nd Edition

• AS/NZS 60950-1, A-tick

PSTN:

• This device is not intended nor approved for connection to the PSTN.

1.2 RADIO AND TV INTERFERENCE (FCC PART 15)

This equipment generates and uses radio frequency energy, and if not

installed and used properly—that is, in strict accordance with the manu-

facturer's instructions—may cause interference to radio and television

reception. This equipment has been tested and found to comply with the

limits for a Class A computing device in accordance with the specifica-

tions in Subpart B of Part 15 of FCC rules, which are designed to provide

reasonable protection from such interference in a commercial installa-

tion. However, there is no guarantee that interference will not occur in a

particular installation. If the equipment causes interference to radio or

television reception, which can be determined by disconnecting the

cables, try to correct the interference by one or more of the following

measures: moving the computing equipment away from the receiver, re-

orienting the receiving antenna, and/or plugging the receiving equipment

into a different AC outlet (such that the computing equipment and

receiver are on different branches).

1.3 CE DECLARATION OF CONFORMITY

We certify that the apparatus described above conforms to the require-

ments of Council Directive 2004/108/EC on the approximation of the

laws of the member states relating to electromagnetic compatibility; and

Council Directive 2006/95/EC on the approximation of the laws of the

member states relating to electrical equipment designed for use within

certain voltage limits.

The safety advice in the documentation accompanying this product shall

be obeyed. The conformity to the above directive is indicated by the CE

sign on the device.

1.4 AUTHORIZED EUROPEAN REPRESENTATIVE

D R M Green, European Compliance Services Limited.

Avalon House, Marcham Road, Abingdon, Oxon OX14 1UD, UK

1.5 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container. This

number may be obtained from Patton Electronics Technical Services at:

•Tel:+1 (301) 975-1007

•Email:support@patton.com

• URL: http://www.patton.com

Note Packages received without an RMA number will not be

accepted.

1.6 SAFETY WHEN WORKING WITH ELECTRICITY

• This device contains no user serviceable parts. This

device can only be repaired by qualified service per-

sonnel.

• Do not open the device when the power cord is con-

nected. For systems without a power switch and without

an external power adapter, line voltages are present

within the device when the power cord is connected.

• For devices with an external power adapter, the power

adapter shall be a listed Limited Power Source. The

mains outlet that is utilized to power the device shall be

within 10 feet (3 meters) of the device, shall be easily

accessible, and protected by a circuit breaker in com-

pliance with local regulatory requirements.

• For AC powered devices, ensure that the power cable

used meets all applicable standards for the country in

which it is to be installed.

• For AC powered devices which have 3 conductor

power plugs (L1, L2 & GND or Hot, Neutral & Safety/

Protective Ground), the wall outlet (or socket) must

have an earth ground.

• For DC powered devices, ensure that the interconnect-

ing cables are rated for proper voltage, current, antici-

pated temperature, flammability, and mechanical

serviceability.

• WAN, LAN & PSTN ports (connections) may have haz-

ardous voltages present regardless of whether the

device is powered ON or OFF. PSTN relates to inter-

faces such as telephone lines, FXS, FXO, DSL, xDSL,

T1, E1, ISDN, Voice, etc. These are known as “hazard-

ous network voltages” and to avoid electric shock use

caution when working near these ports. When discon-

necting cables for these ports, detach the far end con-

nection first.

• Do not work on the device or connect or disconnect

cables during periods of lightning activity.

WARNING

In accordance with the requirements of council direc-

tive 2002/96/EC on Waste of Electrical and Electronic

Equipment (WEEE), ensure that at end-of-life you sepa-

rate this product from other waste and scrap and deliver

to the WEEE collection system in your country for recy-

cling.

This device is NOT intended nor approved for connec-

tion to the PSTN. It is intended only for connection to

customer premise equipment.

When the 2173R is mounted, it shall be secured in such

a way as to withstand a vertical shear force of 50N or 14

pounds.

Electrostatic Discharge (ESD) can damage equipment

and impair electrical circuitry. It occurs when electronic

printed circuit cards are improperly handled and can

result in complete or intermittent failures. Do the fol-

lowing to prevent ESD:

• Always follow ESD prevention procedures when

removing and replacing cards.

• Wear an ESD-preventive wrist strap, ensuring that it

makes good skin contact. Connect the clip to an

unpainted surface of the chassis frame to safely chan-

nel unwanted ESD voltages to ground.

• To properly guard against ESD damage and shocks,

the wrist strap and cord must operate effectively. If no

wrist strap is available, ground yourself by touching the

metal part of the chassis.

WARNING

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This

product has been thoroughly inspected and tested and is warranted for

one year for parts and labor. If any questions or problems arise during

installation or use of this product, contact Patton Electronics Technical

Support at +1 (301) 975-1007.

2.1 FEATURES

• Variable rate CopperLINK extender - Easy to configure

• Auto-MDIX Ethernet

• Configurable 10/100, Full/Half, and Auto-Negotiating Ethernet

• Extends network connections up to 5,500 ft (1.6 km) over 2-wire 24-

AWG unconditioned lines

• Auto-Rate line rates up to 100 Mbps downstream/70 Mbps upstream

• Symmetric or asymmetric settings via DIP switch

• Transparent operation

• LED indicators for Power, Link, Ethernet Link & Activity, and Remote/Local

2.2 DESCRIPTION

The Patton Electronics Model 2173R Ruggedized Ethernet Extender

provides high-speed LAN connections between peered Ethernet LANs,

remote PCs, or any other network enabled 10/100Base-T device.

Operating in pairs, one Model 2173R or 2173 isconfigured as the (L) Local

unit located at one end of the LAN extension and the other Model 2173R

or 2173 is configured as the (R) Remote unit at the other end. These units

can automatically forward LAN broadcasts, multicasts, and frames across

a 2-wire voice-grade twisted-pair link. The data is passed transparently

(unmodified) through the 2173Rs or 2173s. The 2173Rs automatically add

and delete MAC addresses, only passing packets across the CopperLINK

link that are meant for the remote peered LAN.

Figure 1. Typical application

The pair of 2173R and 2173 models work together to create a transparent

extension between two peered Ethernet LANs. Figure 1 shows a typical

point-to-point application.

3.0 INSTALLATION

To install the 2173R Ethernet Extender, do the following:

1. Connect the line interface between the units (refer to section 3.1,

“Connecting the Twisted-Pair Line Interface” on page 10)

Note See Figure 2 for the standalone unit’s rear panel arrangements.

2. Connect the Ethernet interface (refer to section 3.2, “Connecting the

10/100Base-T Ethernet Interface” on page 11).

3. Connect the power plug (refer to section 3.3, “Connecting Power” on

page 12).

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

perature, flammability, and mechanical serviceability.

CAUTION

Figure 2. Model 2173R panel

3.1 CONNECTING THE TWISTED-PAIR LINE INTERFACE

The Model 2173R supports communication between two peer Ethernet

LAN sites over a distance of up to 5,500 ft (1.6 km) over 24 AWG

(0.5 mm) twisted-pair wire.

Note Actual distance and link performance may vary depending on

the environment and type/gauge of wire used.

Follow the steps below to connect the Model 2173R CopperLINK Inter-

faces.

Note The Model 2173R units work in pairs. One of the units must be

configured as a (L) Local unit, and the other unit must be config-

ured as a (R) Remote unit. It does not matter which end is the L

and which is the R. The link is always initiated by the R unit. As

long as the L unit is powered on, the R unit can establish a link

by being powered on or by having its power reset.

1. To function properly, the two Model 2173Rs must be connected

together using twisted-pair, unconditioned, dry, metal wire, between

19 (0.9mm) and 26 AWG (0.4mm). Leased circuits that run through

signal equalization equipment are not acceptable.

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

perature, flammability, and mechanical serviceability.

CopperLINK

twisted-pair

RJ-45 interface

2173R

(RJ-45)

Power

jack

Ethernet

port 1

Ethernet

port 2

Ethernet 1

Link

Power

CopperLink 2173R

Ruggedized Ethernet Extender

Ethernet

2 1

Power

5V; 0.6A

Line

Ethernet 2

Remote

Local

CAUTION

Otros manuales para 2173R

Tabla de contenidos

Otros manuales de Extensor de Patton electronics

Patton electronics

Patton electronics COPPERLINK 2150 Manual de usuario

Patton electronics

Patton electronics CopperLink Ethernet Booster 2110 Manual de usuario

Patton electronics

Patton electronics CopperLink Ethernet Extenders 2158A Manual de usuario

Patton electronics

Patton electronics CopperLink 2160 Series Manual de usuario

Patton electronics

Patton electronics CopperLink 2158 Manual de usuario

Patton electronics

Patton electronics 1173R Manual de usuario

Patton electronics

Patton electronics CopperLink 2160 Series Manual de usuario

Patton electronics

Patton electronics 1068 Manual de usuario

Patton electronics

Patton electronics CopperLink 2172R Manual de usuario

Patton electronics

Patton electronics SmartNode 2292 Manual de usuario

Patton electronics

Patton electronics SmartNode 2290 Series Manual de usuario

Patton electronics

Patton electronics EnviroNET 2100 Series Manual de usuario

Patton electronics

Patton electronics COPPERLINK 2151 Manual de usuario

Patton electronics

Patton electronics CopperLINK 2172A Manual de usuario

Patton electronics

Patton electronics CopperLink 2156 Manual de usuario

Patton electronics

Patton electronics EnviroNET EHA2172 Manual de usuario

Patton electronics

Patton electronics 2156 Manual de usuario

Patton electronics

Patton electronics 1058 Manual de usuario

Patton electronics

Patton electronics CopperLink 2155 Manual de usuario

Patton electronics

Patton electronics Industrial Ethernet Extender with LCD Interface... Manual de instrucciones

Patton electronics

Patton electronics CopperLink 2158 Manual de usuario

Patton electronics

Patton electronics EnviroNet Ethernet Extenders Manual de usuario

Patton electronics

Patton electronics COPPER LINK 2174 Manual de usuario

Patton electronics

Patton electronics CopperLINK 2172 Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario