Parker D*1VW*EE Series Manual de usuario

Bulletin MSG11-5715-729/UK

Direct and Pilot Operated

DC Valves

Parker Hanniﬁn

Manufacturing Germany GmbH & Co. KG

Industrial Systems Division Europe

Gutenbergstr. 38

41564 Kaarst, Germany

Tel.: (+49) 181 99 44 43 0

E-mail: valvesisde@parker.com

Brief Operation Manual

Series

D1VW*EE (Design series 93)

D31DW*EE, D31NW*EE, D*1VW*EE

(Design series 93)

II 2 G c T4 Gb

-20 °C < Ta < +60 °C

Direct/Pilot Operated DC Valves

Series D1VW*/D*W*EE Explosion Proof

Brief Operation Manual

Parker Hanniﬁn Corporation

D_W_EE 5715-729 UK_EXT.indd 19.02.20

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DE-

SCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND

PROPERTY DAMAGE.

This document and other information from Parker-Hannin Corporation, its subsidiaries and

authorized distributors provide product or system options for further investigation by users

having technical expertise.

The user, through its own analysis and testing, is solely responsible for making the nal selection

of the system and components and assuring that all performance, endurance, maintenance,

safety and warning requirements of the application are met. The user must analyze all aspects

of the application, follow applicable industry standards, and follow the information concerning

the product in the current product catalog and in any other materials provided from Parker or its

subsidiaries or authorized distributors.

To the extent that Parker or its subsidiaries or authorized distributors provide component or

system options based upon data or specications provided by the user, the user is responsible

for determining that such data and specications are suitable and sufcient for all applications

and reasonably foreseeable uses of the components or systems.

WARNING — USER RESPONSIBILITY

Please notice:

Prior to commissioning, this brief operation manual must be read and understood. The safety in-

structions must be strictly observed. Parker disclaims any liability for damage resulting from non-

compliance with the safety instructions listed here.

The detailed and current operation manuals for the individual valve series can be found on the Par-

ker homepage at www.parker.com/isde in the “Support” area. Or download the current manuals

by scanning the following QR codes:

D1VW*EE D31DW*EE, D31NW*EE,

D*1VW*EE

Direct/Pilot Operated DC Valves

Series D1VW*/D*W*EE Explosion Proof

Brief Operation Manual

3Parker Hanniﬁn Corporation

D_W_EE 5715-729 UK_EXT.indd 19.02.20

Direct/Pilot Operated DC Valves

Series D1VW*/D*W*EE Explosion Proof

Brief Operation Manual

Parker Hanniﬁn Corporation

D_W_EE 5715-729 UK_EXT.indd 19.02.20

Direct/Pilot Operated DC Valves

Series D1VW*/D*W*EE Explosion Proof

Brief Operation Manual

5Parker Hanniﬁn Corporation

D_W_EE 5715-729 UK_EXT.indd 19.02.20

Attention, safety instruction, please note and implement!

A1. Delivery - Please check the delivery immediately after receiving the product if the content is mat-

ching with the specied scope of supply and for apparent damages due to shipping.

A2. Information obligation - Information regarding safety and health in product documentations must

be read and understood before the customer-specic application (e.g. commissioning and mainte-

nance) and before general use (e.g. storage, transport).

A3. Intended use - If our product is not used for the intended purpose, or structurally modied, impro-

perly used, or there is a failure caused by external impact or force majeure, danger may occur which were

not considered by the manufacturer. Damages resulting from this are not the responsibility of Parker.

A4. Marking, name plates -

Instructions applied on the electronics, i.e. wiring diagrams and name

plates, must be observed and maintained legibly.

A5. Work at the electronics and hydraulics - Installation and commissioning of the electronics may

only be allowed by qualied personnel.

All prescribed requirements for the protection of users must be implemented and complied with be-

fore commissioning/installation/dismantling of the hydraulic components. It should be noted that na-

tional schemes for safety must be observed.

Product speciﬁc (P)

P1. Electronic control system - The valve must be operated by a suitable electronic control system.

Connecting to an unsuitable electronic control system may result in irreparable damage to the valve or

the electronic control system.

P2. Temperature - During application, the product may heat up at the surface and exceed the burn

threshold. Even short-term contacts may lead to burns. T

emperatures of more than 80 °C may cau-

se malfunctions of the onboard electronics.

ATEX speciﬁc (E)

E1. ATEX speciﬁc annexes (chapters) must be observed.

E2. Work on the valve - Throughout any installation, commissioning, maintenance and repair work,

it is the responsibility of the operator to ensure that there is no risk of explosion.

Before starting such work, the operator has to ensure that tools and equipment are only used if they

do not damage the valve and they do not leave behind residues that are inammable.

In addition, clean the valve before starting such work, in particular removing dust, liquids and other depo-

sits. Cleaning should be done using a lint-free cloth. Tools may not be used if they might cause a static

charge on use.

E3. Pressure ﬂuids - The pressure uid must have an ignition temperature of at least 50 K above the

maximum surface temperature of the valve (see EN 13463-5 and IEC 60079-4).

Direct/Pilot Operated DC Valves

Series D1VW*/D*W*EE Explosion Proof

Brief Operation Manual

Parker Hanniﬁn Corporation

D_W_EE 5715-729 UK_EXT.indd 19.02.20

D31DW*EE, D31NW*EE, D*1VW*EE

D1VW*EE

Name plate

Manufacturer's logo and address

Serial number (PTS ID: eight-digit number, barcode)

CE mark, Ex protection symbol and explosion protection class

of the complete valve to European Directive 2014/34/EU

Entire name of the complete valve

Hydraulic data

Code for year and month of manufacture

QR-code (internal use)

Hydraulic symbol

Manufacturer's logo and address

CE mark, Ex protection symbol and explosion protection class

of the complete valve to European Directive 2014/34/EU

Serial number (PTS ID: eight-digit number, barcode)

QR-code (internal use)

Entire name of the complete valve

Hydraulic and electrical data

Hydraulic symbol

Code for year and month of manufacture

Direct/Pilot Operated DC Valves

Series D1VW*/D*W*EE Explosion Proof

Brief Operation Manual

7Parker Hanniﬁn Corporation

D_W_EE 5715-729 UK_EXT.indd 19.02.20

With electrical connections the protective conductor (PE W) must be connected according to the relevant regulations.

Technical data

General

Design Directional spool valve

Actuation Solenoid

Series D1VW D31DW D31NW D41VW D91VW D111VW

Size NG06 NG10 NG10 NG16 NG25 NG32

Weight (1/2 solenoids) [kg] 1.8 / 2.7 6.0 / 6.6 7.6 / 8.1 9.7 / 10.3 17.9 / 18.6 67.4 / 68.0

Mounting interface DIN 24340

DIN 24340

A10

DIN 24340

A10

DIN 24340

A16

DIN 24340

A25

DIN 24340

A32

ISO 4401 ISO 4401 ISO 4401 ISO 4401 ISO 4401 ISO 4401

NFPA D03 NFPA D05 NFPA D05 NFPA D07 NFPA D08 NFPA D10

CETOP RP 121-H

Mounting position unrestricted, preferably horizontal

Ambient temperature [°C] -20...+60

MTTFDvalue [Jahre] 150 75

Hydraulic

Max. operating pressure [bar] P, A, B: 350; T: 210

Fluid Hydraulic oil according to DIN 51524

Fluid temperature [°C] -20 ... +60

Viscosity permitted [cSt] /

recommended [cSt] /

[mm²/s]

2,8...400

30...80

Filtration ISO 4406; 18/16/13

Flow max. [l/min] 60 150 170 300 700 2000

Leakage at 50 bar (per ow path) [ml/

min] up to 10* -

Leakage at 350 bar (per ow path) [ml/

min] -up to 100* up to 150* up to 200* up to 800* up to 5000*

*depending on spool

Minimum pilot supply pressure [bar] - n.a. see p/Q

diagram

see p/Q

diagram

see p/Q

diagram n.a.

Minimum pilot supply pressure [bar] - 5 7 5

Static / Dynamic

Step response at 95 % [ms] Energized / De-energized

DC solenoids 32 / 40 -

AC solenoids 40 / 75 -

DC solenoids Pilot pressure 50 bar - 60 / 40 50/60 95 / 65 150 / 170 470 / 390

100 bar - 55 / 40 50/60 75 / 65 110 / 170 320 / 390

250 bar - 55 / 40 50/50 60 / 65 90 / 170 210 / 390

350 bar - 55 / 40 50/50 60 / 65 85 / 170 200 / 390

AC solenoids Pilot pressure 50 bar - 40 / 30 30/50 75 / 55 130 / 155 450 / 375

100 bar - 35 / 30 30/50 65 / 55 90 / 155 300 / 375

250 bar - 35 / 30 30/50 40 / 55 70 / 155 190 / 375

350 bar - 35 / 30 30/50 40 / 55 65 / 155 180 / 375

Electrical characteristics

Duty ratio 100 % ED; CAUTION: coil temperature up to 135 °C possible

Protection class , Ex e mb IIC T4 Gb, IP66 (plugged and mounted correctly)

Code J N P

Supply voltage / ripple [V] 24 V = 230/50 Hz 110/50 Hz

Tolerance supply voltage [%] ±10 ±10 ±10

Current consumption [A] 1.0 0.12 0.25

Power consumption [W] 24 24 24

Solenoid connection Box with M20x1.5 entry for cable glands. Solenoid identication as per

ISO 9461.

Wiring min. [mm²] 3 x 1.5 recommended

Wiring length max. [m] 50 recommended

Direct/Pilot Operated DC Valves

Series D1VW*/D*W*EE Explosion Proof

Brief Operation Manual

Parker Hanniﬁn Corporation

D_W_EE 5715-729 UK_EXT.indd 19.02.20

Direct operated DC valve

Pilot operated DC valve

D1VW

D91VW

ISO 4762-12.9 Surface ﬁnish

D1VW 4x M5x30 7.6 Nm ±15 %

R 6,3

max

0,01/100

D31DW, D31NW 4x M6x40 13.2 Nm ±15 %

D41VW 2x M6x55; 4x M10x60 13.2 Nm; 63 Nm ±15 %

D91VW 6x M12x75 108 Nm ±15 %

D111VW 6x M20x90 517 Nm ±15 %

Electrical connection, see D14-2128D3-* und K14-2074D3-* in the annex.

Manual

override

Manual

override

Manual

override

Manual

override

Direct/Pilot Operated DC Valves

Series D1VW*/D*W*EE Explosion Proof

Brief Operation Manual

9Parker Hanniﬁn Corporation

D_W_EE 5715-729 UK_EXT.indd 19.02.20

Standards, directives and provisions relating to the operation of systems in potentially explosive

areas (extract)

1999/92/EC Minimum requirements for improving the safety and health protection of workers

potentially at risk from explosive atmospheres

2004/108/EC Electromagnetic compatibility directive (EMC)

EN ISO 12100:2010 Safety of machinery – General principles for design risk assessment and risk reduction

EN 15198:2007 Methodology for risk assessment of non-electrical equipment and components

for intended use in potentially explosive atmospheres

EN 60079-0:2009 Explosive atmospheres –

Part 0: Equipment – General requirements

EN 60079-7:2007 Explosive atmospheres –

Part 7: Equipment protection by increased safety “e”

EN 60079-14:2009 Explosive atmospheres –

Part 14: Electrical installations design, selection and erection

(IEC 60079-14:2013)

EN 60079-17:2014 Explosive atmospheres –

Part 17: Electrical installations inspection and maintenance

(IEC 60079-17:2013)

EN 60529:2014 Degrees of protection provided by enclosures (IP code)

(IEC 60529:1989 + A1:1999 + A2:2013)

BetrSichV Ordinance on industrial safety and health

TRBS 2153:2009 Technical rules for operating safety

Avoiding ignition hazards as a result of electrostatic charges

Direct/Pilot Operated DC Valves

Series D1VW*/D*W*EE Explosion Proof

Brief Operation Manual

Parker Hanniﬁn Corporation

D_W_EE 5715-729 UK_EXT.indd 19.02.20

User guide – Solenoid / Bedienungsanleitung Magnet

Otros manuales para D*1VW*EE Series

Este manual sirve para los siguientes modelos

Otros manuales de Unidad de control de Parker

Parker

Parker LINKnet TechBox Series Manual de usuario

Parker

Parker P33 Guía de configuración rápida

Parker

Parker Series PCD 00A-400 Manual de usuario

Parker

Parker 810 Series Instrucciones de montaje

Parker

Parker DP-V1 Manual de usuario

Parker

Parker TPQ Series Manual de usuario

Parker

Parker DINCon II Instrucciones de montaje

Parker

Parker CK-6D Guía

Parker

Parker D1FH series Manual de usuario

Parker

Parker D*1VW*EE Series Manual de usuario

Parker

Parker MI-101 Instrucciones de funcionamiento y mantenimiento

Parker

Parker 7121Z028 Instrucciones de montaje

Parker

Parker TPQ Series Manual de usuario

Parker

Parker S6N-DN Manual de usuario

Parker

Parker PHD Series Manual de usuario

Parker

Parker Series DFplus Manual de usuario

Parker

Parker IOTA ONE Series Manual de usuario

Parker

Parker PEV Manual de servicio

Parker

Parker Sporlan B5D Series Guía del usuario

Parker

Parker Sporlan LAC-4 Nota de publicación

Parker

Parker U131B01 Instrucciones de montaje

Parker

Parker RL Series Especificaciones técnicas

Parker

Parker PSUP Series Manual de usuario

Parker

Parker PQDXXA-Z10 Manual de instalación y operación

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario