Paradyne 3163 Manual de usuario

ACCULINK 3163 DSU/CSU

QUICK REFERENCE

Document No. 3163-A2-GL10-00

Printed in U.S.A.

Notice

This publication is protected by federal copyright law. No part of this publication may be

copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated

into any human or computer language in any form or by any means, electronic,

mechanical, magnetic, manual or otherwise, or disclosed to third parties without the

express written permission of Paradyne Corporation, 8545 126th Ave. N., Largo,

FL 33773.

Paradyne Corporation makes no representation or warranties with respect to the

contents hereof and specifically disclaims any implied warranties of merchantability or

fitness for a particular purpose. Further, Paradyne Corporation reserves the right to

revise this publication and to make changes from time to time in the contents hereof

without obligation of Paradyne Corporation to notify any person of such revision or

changes.

Changes and enhancements to the product and to the information herein will be

documented and issued as a new release to this manual.

Warranty, Sales, and Service Information

Contact your local sales representative, service representative, or distributor directly for

any help needed. For additional information concerning warranty, sales, service, repair,

installation, documentation, training, distributor locations, or Paradyne worldwide office

locations, use one of the following methods:

Via the Internet: Visit the Paradyne World Wide Web site at

http://www.paradyne.com

Via Telephone: Call our automated call system to receive current information via

fax or to speak with a company representative.

— Within the U.S.A., call 1-800-870-2221

— Outside the U.S.A, call 1-727-530-2340

Document Feedback

We welcome your comments and suggestions about this document. Please mail them

to Technical Publications, Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773,

or send e-mail to [email protected]. Include the number and title of this

document in your correspondence. Please include your name and phone number if you

are willing to provide additional clarification.

Trademarks

All products and services mentioned herein are the trademarks, service marks,

registered trademarks or registered service marks of their respective owners.

ACCULINK 3163 DSU/CSU

Quick Reference

Document Number 3163-A2-GL10-00

December 1998

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the

documentation for specific topics and print only what you need, reducing the waste of

surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com. Select

Service & Support

→

Technical Manuals

→

T1/E1 Digital Access Devices.

Select the following document:

Document No. 3163-A2-GB20

ACCULINK 3163 Data Service Unit/Channel Service Unit User’s Guide

To request a paper copy of a Paradyne document:

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

Outside the U.S.A., call 1-727-530-8623

Before installing the DSU/CSU, read the

Important Safety Instructions

beginning on

page 13.

Quick Start Procedure

The following procedure is for experienced DSU/CSU users who are familiar with the

3163 DSU/CSU installation process and have no special requirements for their

application. See the

ACCULINK 3163 Data Service Unit/Channel Service Unit User’s

Guide

for more information.

1. If ac power is to be used, attach the power cord to the rear of the DSU/CSU and

the power transformer to a grounded 100 Vac power outlet. For information about

the optional dc power cable for a +24 Vdc or –48 Vdc power source, see the User’s

Guide.

2. Attach the 3163 DSU/CSU network connection to the T1 network using the

appropriate cable. Attach the 3163 DSU/CSU to the customer premises equipment

via the port connector.

3. Power on the DSU/CSU to perform the power-up self-test.

4. If you intend to use front panel emulation, connect the cable from the PC to the

COM port on the rear panel of the DSU/CSU.

5. The Factory 1 configuration for ESF framing format and B8ZS line coding format is

the default configuration and is appropriate for most networks. If this configuration

does not work for you, try the Factory 2 configuration for D4 framing format and

AMI line coding format. To further customize configuration options, refer to the

configuration option tables beginning on page 4.

6. During the power-up self-test, the FAIL LED flashes, then all LEDs blink twice.

When the test is complete, verify that the DSU/CSU is functional by observing that

the OK and NETWORK SIG LEDs are lit.

PORT 1 COM PORT MODEM

POWER NETWORK

CAUTION:

AUX PORTOR COM PORT MUST NOT BE CONNECTED TO PSTN OR T1 NETWORK

NEC

PORT 1 COM PORT MODEM

POWER NETWORK

CAUTION:

AUX PORTOR COM PORT MUST NOT BE CONNECTED TO PSTN OR T1 NETWORK

NEC

98-15941a

PSTN

Modem

Power

Modem

Power

Front

Panel

3163 DSU/CSU

3163

DSU/CSU

3163

DSU/CSU

Serial

Port

COM

Port Network

Port

Modem

Port

COM

Port Network

Port

Modem

Port

Network

Port

T1 or Serial Connections

Dial Connections

Terminal

T1 Network

Cabling Examples

Configuration Options

Configuration options are accessed from the Configuration branch of the front panel

menu.

DSU ESF

98-15943a

Stat

DevHS STest Perf TStat LED ID

T1 PrtnPrtnUserTelco

Cur 24Tot Intvl FarNear

Cur 8Tot Intvl

Load EditArea From:

Choose Function:

Activ Cust1 Cust2 Fact1 Fact2

User AlarmNETPort Chan Gen Mgmt

Gen

Save

Cust1Activ Cust2

Edit

Cnfig

Prt1ClearDsply

Ctrl

Rel ClrReg ResetCID

PasswdDLCall

DiscDialPass ChDir

1 .. 5,A

(Directory)

1 .. 5,A

(Directory)

User Prt1

Test

Rlpbk Lpbk Ptrns Lamp

QRSS 511

Abort Mon

LLBUP

LLBDN

54UP

54DN

FT1UP

FT1DN

PLBRLB

LLB

Abort DCLB

DTLB

QRSS1in8 511

Send

Factory default configuration options are shown in boldface type in the following tables.

Table 1. Port Configuration Options (1 of 2)

Option Factory 1 Factory 2 Comments/Description

E530 E530

Port Type:

V.35 V.35 Selects the port t

pe: EIA-530A

Port Type: RS449 RS449

Selects

the

ort

ty e:

EIA

530A

V.35, RS449, or X.21.

X.21 X.21

Base Rate:

Nx64 Nx64 Enables the port to either Nx56 or

Base Rate: Nx56 Nx56

Enables

the

ort

either

Nx56

Nx64 rates.

Disab Disab

Net DCLB:

V.54 V.54 Network-initiated DCLB, allows

DCLB t b t ll d b i b d

Net DCLB: FT1 FT1 DCLB to be controlled by inband

V.54 or FT1 (ANSI) codes.

Both Both

Disab Disab

Port LB:

DTLB DTLB Port-initiated Loopbacks, allows

L b k t b i iti t d th h

Port LB: DCLB DCLB Loopbacks to be initiated through

the port by the external DTE.

Both Both

Disab Disab

All Ones:

DTR DTR All ones sent to network

(

DTE

)

All Ones: RTS RTS

All

ones

sent

network

(DTE)

when DTR or RTS interrupted.

Both Both

Rcv Yellow: None None Data port remains enabled, or is

di bl d i i Y ll

Rcv

Yellow:

(Received Yellow) Halt Halt disabled, on receiving Yellow on

network T1.

Tx Clock:

Int Int Selects whether the transmitted

d t l k i i t l (TXC)

Tx Clock: Ext Ext data clock is internal (TXC) or

external (XTXC).

InvertTxC: Enab Enab Selects phase inversion of the

InvertTxC:

(Invert Tx Clock) Disab Disab

Selects

hase

inversion

the

transmit clock (TXC).

InvertData:

Enab Enab Allows the data on the port to be

InvertData: Disab Disab

Allows

the

data

the

ort

inverted.

Table 2. Network Interface Configuration Options

Option Factory 1 Factory 2 Comments/Description

NET Framing:

D4 D4

Selects D4 or ESF framing format

NET Framing: ESF ESF Selects D4 or ESF framing format.

NET Coding:

AMI AMI Selects AMI or B8ZS line coding

NET Coding: B8ZS B8ZS

Selects

AMI

B8ZS

line

coding

format.

0.0 0.0

LBO:

–7.5 –7.5

Provides Line Build Out in dB

LBO: –15 –15 Provides Line Build Out in dB.

–22.5 –22.5

ANSI PRM:

Enab Enab Sends ANSI Performance Report

ANSI PRM: Disab Disab

Sends

ANSI

Performance

Re ort

Messages.

Mgmt Link:

Disab Disab Specifies whether the FDL’s

Mgmt Link: SNMP SNMP

S ecifies

whether

the

FDLs

Management Link is enabled.

NET LLB:

Enab Enab Network-initiatedLLB allows LLB to

NET LLB: Disab Disab

Network initiated

LLB

allows

LLB

be controlled by inband LLB codes.

NET PLB:

Enab Enab Network-initiated PLB allows PLB

to be controlled by FDL PLB

NET PLB: Disab Disab to be controlled by FDL PLB

messages.

62411 62411 Provides enforcement of ones

d i i AT&T TR

BitStuff: Part68 Part68 density protection per AT&T TR

62411, ANSI T1

403, and FCC

Disab Disab

62411

ANSI

403

, an

FCC

Part 68 Technical Publication.

Circuit Ident: Edit Edit Specifies the transmission vendor’s

Circuit

Ident:

Clear Clear

S ecifies

the

transmission

vendor s

circuit identifier.

Table 3. Channel Configuration Options (1 of 2)

Option Factory 1 Factory 2 Comments/Description

Block Block

Determines how channels are

Assign By: ACAMI ACAMI Determines how channels are

assigned: contiguous blocks,

Chan Chan

gg ,

ACAMI or individual channels.

Port Rate:

64 (56)

128 (112)

192 (168)

256 (224)

320 (280)

384 (336)

448 (392)

512 (448)

576 (504)

640 (560)

704 (616)

768 (672)

832 (728)

896 (784)

960 (840)

1024 (896)

1088 (952)

1152 (1008)

1216 (1064)

1280 (1120)

1344 (1176)

1408 (1232)

1472 (1288)

1536 (1344)

64 (56)

128 (112)

192 (168)

256 (224)

320 (280)

384 (336)

448 (392)

512 (448)

576 (504)

640 (560)

704 (616)

768 (672)

832 (728)

896 (784)

960 (840)

1024 (896)

1088 (952)

1152 (1008)

1216 (1064)

1280 (1120)

1344 (1176)

1408 (1232)

1472 (1288)

1536 (1344)

Selects the data rate for the port.

The possible rates depend on

whether the port is configured for

Nx56 or Nx64.

This configuration option only

appears if the “Assigned By”

configuration option is Block or

ACAMI.

Table 3. Channel Configuration Options (2 of 2)

Option Factory 1 Factory 2 Comments/Description

Clear Clear Clears (unassigns) channels for

this port.

Start At:

N1 (D1)

N2 (D2)

N3 (D3)

N4 (D4)

N5 (D5)

N6 (D6)

N7 (D7)

N8 (D8)

N9 (D9)

N10 (D10)

N11 (D11)

N12 (D12)

N13 (D13)

N14 (D14)

N15 (D15)

N16 (D16)

N17 (D17)

N18 (D18)

N19 (D19)

N20 (D20)

N21 (D21)

N22 (D22)

N23 (D23)

N24 (D24)

N1 (D1)

N2 (D2)

N3 (D3)

N4 (D4)

N5 (D5)

N6 (D6)

N7 (D7)

N8 (D8)

N9 (D9)

N10 (D10)

N11 (D11)

N12 (D12)

N13 (D13)

N14 (D14)

N15 (D15)

N16 (D16)

N17 (D17)

N18 (D18)

N19 (D19)

N20 (D20)

N21 (D21)

N22 (D22)

N23 (D23)

N24 (D24)

This configuration option appears if

the “Assigned By” configuration

option is Block or ACAMI.

Line 1 Displays: Line 2 Displays: Meaning Comments/Description

— Unassigned

N1 N2 N3 ...... N24: Prt1 Channel assigned

to port 1 This configuration option appears if

the “Assigned By” configuration

option is individual channels

......

N24:

(If assigned to NET)

D1 D2 D3 ..... D24:

(If assigned to DTE)

D1, D2 ... D24 Channel assigned

to this DTE

channel

option is individual channels

(Chan).

Function key under the channel

(If

ass

gne

DTE)

N1, N2 ... N24 Channel assigned

to this NET

channel

Function

key

under

the

channel

(N1, N2 etc.) assigns (unassigns)

port (1, 2, 3, or 4) to that channel.

Table 4. General Configuration Options

Option Factory 1 Factory 2 Comments/Description

NET NET

Clock Src:

DTE DTE Selects the clock source to be

dth tlkfth

Clock Src: Prt1 Prt1 used as the master clock for the

DSU/CSU.

Int Int

SU/CSU

Tst Timeout

Enab Enab Specifies whether the durations of

i iti t d t t li it d b

Tst Timeout Disab Disab user-initiated tests are limited by

Tst Duration.

10 10

Tst Duration

Up Up Specifies the duration of

iii dl b k d

ura

Down Down user-initiated loopback and pattern

tests.

Save Save

Table 5. User Configuration Options (1 of 3)

Option Factory 1 Factory 2 Comments/Description

Self Test:

Enab Enab Allows b

pass of self-test on

Self-Test: Disab Disab

Allows

by ass

self-test

initialization.

FP Access:

Enab Enab Controls whether front panel

FP Access: Disab Disab

Controls

whether

front

anel

access or display is allowed.

FP Pass:

Enab Enab Controls whether front panel

FP Pass: Disab Disab

Controls

whether

front

anel

pass-through is allowed.

Dial In:

Enab Enab Controls whether dial-in access is

Dial-In: Disab Disab

Controls

whether

dial-in

access

allowed.

None None

Password:

Com Com Controls whether a password is

Password: Modem Modem

Controls

whether

assword

required during a call setup.

Both Both

Mgmt Mgmt

Com Use: ASCII ASCII Controls how the COM port is

used.

Term Term

used

Com Ty

Async Async Controls whether the COM port is

Com Type: Sync Sync

Controls

whether

the

COM

ort

synchronous or asynchronous.

Otros manuales para 3163

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de Paradyne

Paradyne

Paradyne SLV Manual de usuario

Paradyne

Paradyne COMSPHERE 3610 Manual de usuario

Paradyne

Paradyne MIM-4000F Manual de usuario

Paradyne

Paradyne 4300 Manual de usuario

Paradyne

Paradyne COMSPHERE 3800PLUS Manual de instrucciones

Paradyne

Paradyne 7112 Manual de usuario

Paradyne

Paradyne 7510 DSU Manual de instalación

Paradyne

Paradyne COMSPHERE 6700 Series Manual de usuario

Paradyne

Paradyne Hotwire 5216 Manual de usuario

Paradyne

Paradyne Hotwire 5446 Manual de usuario

Paradyne

Paradyne Single T1 Network Access Module (NAM)... Manual de usuario

Paradyne

Paradyne MIM-2E1 Manual de usuario

Paradyne

Paradyne HotWire 7924 Manual de usuario

Paradyne

Paradyne Hotwire 5446 Manual de usuario

Paradyne

Paradyne Hotwire 8775 MSDSL Manual de usuario

Paradyne

Paradyne Hotwire 8784 Manual de usuario

Paradyne

Paradyne MIM-2T1 Manual de usuario

Paradyne

Paradyne 7510-A2-GB20-00 727 Manual de usuario

Paradyne

Paradyne FrameSaver 9120 Manual del propietario

Paradyne

Paradyne HotWire 5246 Manual de usuario

Paradyne

Paradyne FrameSaver SLV 9626 Manual de usuario

Paradyne

Paradyne ACCULIN 3364 Manual

Paradyne

Paradyne MCC Manual de usuario

Paradyne

Paradyne GranDSLAM 4200 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario