Panduit Atlona AT-OME-MS42 Manual de usuario

Installation Guide

AT-OME-MS42

Omega Multi-format 4x2 matrix switcher with HDMI, USB-C,

and DisplayPort inputs, plus HDMI and HDBaseT outputs

AT-OME-MS42

1 x AT-OME-MS42

1 x Captive screw connector, 5-pin

1 x Captive screw connector, 3-pin

1 x USB-C cable

2 x Mounting plate

4 x Mounting screws

4 x Feet w/rubber grips

1 x 24V DC power supply

1 x IEC power cord

1 x Installation Guide

Package Contents

The Atlona AT-OME-MS42 is a 4x2 matrix switcher with HDMI, USB-C, and DisplayPort inputs,

plus HDMI and HDBaseT outputs. Part of the Omega™ Series of integration products for modern

AV communications and collaboration, the OME-MS42 is HDCP 2.2 compliant and features

HDBaseT extension for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and

USB over distances up to 330 feet (100 meters). All inputs and the local HDMI output support

4K HDR and 4K/60 4:4:4 at HDMI data rates up to 18 Gbps. Additionally, 4K downscaling to

1080p @ 60, 30, or 24 Hz is available for the HDMI output when connected to an HD sink. The

integrated USB extension addresses the challenge of connecting between USB devices at

remote locations, and is ideal for software video conferencing and touch or interactive displays.

The OME-MS42 includes USB 2.0 and USB-C interfaces for three host PCs, plus two peripheral

devices such as a camera, microphone, speakerphone, or keyboard and mouse. It is ideal for

video conferencing and many other 4K presentation applications with the OME-EX-RX receiver

and OME-SR21 scaling receiver.

IMPORTANT: Visit https://atlona.com/product/AT-OME-MS42 for the latest rmware

updates and User Manual.

Installation Guide

AT-OME-MS42

Panel Descriptions

1 PWR LED

Illuminates when the unit is receiving

power.

2 LINK LED

Lights up when connected and receiving

signal over HDBaseT.

3 HDMI OUT/HDBaseT OUT

Button - Press to manually switch

between inputs.

LEDs - Will illuminate for the currently

selected input.

4 DISPLAY

Press this button to toggle the power state

of the desired display.

5 IP MODE LED and button

Press and hold the button for 5 seconds

until the LED blinks to switch the IP mode

between DHCP and Static IP modes. The

LED will blink 4 times for DHCP and 2

times for static IP.

6 RESET LED and button

Press and hold the button for 5 seconds

until the unit resets. The LED will blink 3

times as the unit resets to factory default

settings

7 HOST USB

Connect to a computer using a USB

B to USB A cable. USB 3.0 signal will

only pass when using the local USB hub

devices.

8 USB HUB

Connect USB devices to these ports.

e.g. USB camera, mouse, etc.

9 AUDIO OUT

Connect to an audio DSP, amplier, or

other audio distribution devices.

10 RS-232

Use for device or display control.

11 USB-C IN

Connect a USB-C source to this port.

12 DP IN

Connect a DisplayPort source to this port.

13 HDMI IN

Connect HDMI cables to these ports from

HDMI sources.

14 HDMI Output

Connect an HDMI cable from here to an

HDMI display.

15 HDBaseT Output

Connect a CAT5e/6/6a/7 cable from this

port to an HDBaseT receiver.

16 LAN

Connect an Ethernet cable to this port for

control of the unit or to pass Ethernet to a

local device.

17 DC 24V

Connect the included power supply to this

port.

IP MODE

HDMI IN

1 2

3 4

DP INUSB-C IN HDMI OUT HDBaseT OUT LAN DC 24V

RESET

AUDIO OUT

USB HOST

RS-232

L R

RX TX

USBUSB

USB HUB

HDMI 3

HDMI 4

PWR

LINK

USB-C

AT-OME-MS42

OMEGATM MULTI-FOMAT SWITCHER

HDMI 3

HDMI 4

USB-C

HDMI OUT HDBaseT OUT DISPLAY

1 42

59 106 8

11 15

1412 13 16 17

Installation Guide

AT-OME-MS42

Audio

Connect to an audio DSP, amplier, or other

audio distribution devices.

RS-232

A 3-pin captive screw connector has been

included for RS-232.

Pin out will be determined by the RS-232 cable

and connect as RX (receive), TX (transmit) and

(Ground).

GND RX TX

GNDRX TX

Use a jumper between the negative and

ground pins when using an unbalanced

connection.

Balanced Unbalanced

ANALOG IN

L R

Negative

+Positive

Ground

ANALOG IN

L R

+Positive

Ground

Installation Guide

AT-OME-MS42

1 Turn the unit upside down on a at surface.

2 Position the included mounting plates over the pre-drilled holes on the bottom of the

enclosure. Use the included mounting screws to attach the mounting plates. When

attaching mounting plates, the countersink bevels on the mounting plates should face

upward.

PWR

VOL LEVEL

AUDIO AMPLIFIER

FWSIGNAL ANALOG IN

NET AUDIODEVICE ID

GAIN

HDMI 3

HDMI 4

PWR

LINK

USB-C

HDBaseT OUT

AT-OME-MS42

OMEGA

MULTI-FOMAT SWITCHER

HDMI 3

HDMI 4

USB-C

HDMI OUT

3 Mount the unit using the circular holes, on each mounting plate. Mounting screws are not

included.

HDMI 3

HDMI 4

PWR

LINK

USB-C

HDBaseT OUT

AT-OME-MS42

OMEGA

MULTI-FOMAT SWITCHER

HDMI 3

HDMI 4

USB-C

HDMI OUT

Mounting Instructions

The AT-OME-MS42 can be mounted under a desk, lectern, or other at surface.

Installation Guide

AT-OME-MS42

1 Connect USB-C, DisplayPort, and HDMI sources to the USB-C, DP, and HDMI input ports.

2 *Optional* Connect the 2CH analog AUDIO OUT ports to an audio DSP, amplier, or other

audio distribution devices.

3 *Optional* Connect USB devices (e.g. USB camera) to the USB hub ports.

4 *Optional* Connect the HOST USB port to a computer using a USB B to USB A cable (cable

not provided).

5 *Optional* For control, connect to the 3-pin captive screw RS-232 port.

6 *Optional* Connect a network switch to the LAN port, for IP control or system conguration.

7 Connect an HDMI cable from the HDMI output port to a local display.

8 Connect a compatible HDBaseT Receiver (e.g. AT-OME-EX-RX or AT-OME-SR21) to the

HDBaseT output port.

9 Connect the included 24V DC power supply to a compatible power outlet.

Installation

Refer to the tables below for recommended cabling when using Altona products with HDBaseT.

The green bars indicate the signal quality when using each type of cable. Higher-quality signals

are represented by more bars.

Cable Recommendation Guidelines

Cable Max. Distance @ 4K Max. Distance @ 1080p

CAT5e 295 feet (90 meters) 330 feet (100 meters)

CAT6 / CAT6a / CAT7 330 feet (100 meters) 330 feet (100 meters)

IMPORTANT: Stranded or patch cables are not recommended due to

performance issues.

DHCP

By default, the AT-OME-MS42 is set to DHCP mode. In this mode, when the AT-OME-MS42 is

connected to the Local Area Network (LAN), it will automatically be assigned an IP address by

the DHCP server (if available). Press the IP MODE button to show the IP address in the top left

corner of the display connected to the HDMI output.

Core Shielding CAT5e CAT6 CAT6a CAT7

Solid UTP (unshielded) N/A

STP (shielded)

*Atlona recommends TIA/EIA 568-B termination for optimal performance.

Installation Guide

AT-OME-MS42

Velocity™with Integrated AMS

For easy conguration of Atlona devices, Velocity with Integrated AMS is available from https://

atlona.com/ams for free. Two options can be used for installation: The free Linux based software

download or the easy to install server hardware (AT-AMS-HW).

Once AMS has been set up:

1 Open a browser on the same network as Velocity with Integrated AMS and go to the IP

address of Velocity with Integrated AMS. View the AMS 2.0 installation instructions on how

to nd the IP address of the software.

2. Enter the login information on the Velocity with Integrated AMS web page, then click the

3 View the AT-OME-MS42 manual for routing and conguration information.

Accessing the webGUI

The AT-OME-MS42 includes a built-in webGUI, which allows easy remote management and

control of all features. Follow the instructions below to access the webGUI.

1 Make sure that an Ethernet cable is connected between the LAN port on the AT-OME-MS42

and the network.

2 Press the IP MODE button on the front panel to display the IP address of the unit in the top

left corner of the connected HDMI display.

3 Launch a web browser and enter the IP address in the address bar.

4 The AT-OME-MS42 Login page will be displayed.

5 Enter the following information on the Login page.

Password: Atlona

6 Click the Login button.

7 Refer to the user manual for detailed operation of the webGUI.

Static

If no DHCP server is available, or a static IP is required, the OME-MS42 can be set to static IP

mode using the IP mode button.

• Press and hold the IP MODE button for 5 seconds to switch to static IP mode, the LED will

blink 2 times when it goes into Static IP mode. In this mode, the AT-OME-MS42 will be set

to the following:

IP address: 192.168.1.254

Subnet mask 255.255.0.0

Gateway: 192.168.1.1

• To switch back to DHCP, press and hold the IP mode button for 5 seconds. The LED will

blink 4 times when successfully put into DHCP mode.

Installation Guide

AT-OME-MS42

Notes

Installation Guide

AT-OME-MS42

Version 5 25137-R5

The terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI licensing Administrator, Inc.

trademarks are the property of their respective owners. Pricing, specications and availability subject to change without notice. Actual products, product images, and

online product images may vary from images shown here.

English Declaration of Conformity

The English version can be found under the resources tab at:

https://atlona.com/product/ome-ms42/.

Warranty

Chinese Declaration of Conformity 中国RoHS合格声明

To view the product warranty, use the following link or QR code:

https://atlona.com/warranty/.

由SKU列出於:

https://atlona.com/about-us/china-rohs/.

US International

atlona.com •408.962.0515 •41.43.508.4321

Otros manuales para Atlona AT-OME-MS42

Tabla de contenidos

Otros manuales de Cambiar de Panduit

Panduit

Panduit AT-HDVS-150-TX-WP Manual de usuario

Panduit

Panduit ATLONA AT-HDR-SW-51 Manual de usuario

Panduit

Panduit Atlona AT-OME-ST31A Manual técnico

Panduit

Panduit ATLONA AT-UHD-SW-52 Manual de usuario

Panduit

Panduit Atlona AT-HDR-SW-52ED Manual de usuario

Panduit

Panduit PN380 Manual de usuario

Panduit

Panduit ATLONA AT-UHD-CLSO-601 Manual de usuario

Panduit

Panduit Atlona AT-HDVS-210U-TX-WP Manual de usuario

Panduit

Panduit Atlona AT-UHD-SW-5000ED Manual de usuario

Panduit

Panduit PViQ Manual de usuario

Panduit

Panduit ATLONA AT-UHD-SW-510W-KIT Manual de usuario

Panduit

Panduit ATLONA OMEGA AT-OME-MH21-CP Manual de usuario

Panduit

Panduit Network Switch Manual de usuario

Panduit

Panduit CDE2 Manual de usuario

Panduit

Panduit Atlona AT-OME-ST31A Manual de usuario

Panduit

Panduit ATLONA AT-UHD-CLSO-601 Manual de usuario

Panduit

Panduit Atlona AT-HDVS-200-TX Manual de usuario

Panduit

Panduit Atlona AT-HDVS-210H-TX-WP Manual de usuario

Panduit

Panduit Atlona AT-HDVS-150-TX-HDMI Manual de usuario

Panduit

Panduit Atlona AT-JUNO-451 Manual de usuario

Panduit

Panduit Atlona AT-UHD-SW-51 Manual de usuario

Panduit

Panduit ATLONA Opus AT-OPUS-RX41 Manual de usuario

Panduit

Panduit ATLONA Omega AT-OME-MH21 Manual de usuario

Panduit

Panduit ATLONA AT-UHD-SW-52ED Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario