Panasonic MC-CJ911-R747 Manual de usuario

ing and distribution is a violation of law.

Order Number VCB1203004CE

Vacuum Cleaner

Model No. MC-CJ911-R747

MC-CJ911-R149

MC-CJ911-R147

Product Color : (R) Red

Destination :

1.Saudi Arabia, Kuwait

MC-CJ911-R747

2.Iran

MC-CJ911-R149

3.UAE

MC-CJ911-R147

TABLE OF CONTENTS PAGE PAGE

1 Specifications------------------------------------------------------3

2 Location of Controls and Components--------------------4

3 Troubleshooting Guide------------------------------------------5

4 Disassembly and Assembly Instructions-----------------7

4.1. Disassembly of the Dust Cover Assy -----------------7

4.2. Disassembly of the Dust Bag Holder------------------8

4.3. Disassembly of Body Cover Assy, Switch

Pedal, Cord Rewind Button------------------------------9

4.4. Disassembly of Upper Body, Handle Cover,

and Guide Lever------------------------------------------10

4.5. Disassembly of Motor Case Set----------------------12

4.6. Disassembly of Cord Reel Unit-----------------------12

4.7. Disassembly of Rail Base Unit------------------------13

4.8. Disassembly of Fan Motor Unit-----------------------13

4.9. Disassembly of P.C.B. Assy---------------------------15

4.10. Replacement of Blower Cover------------------------16

5 Wiring Connection Diagram---------------------------------17

6 Exploded View and Replacement Parts List -----------18

6.1. EXPLODED VIEW (ATTACHMENTS)--------------18

6.2. PARTS LIST (ATTACHMENTS)----------------------19

6.3. EXPLODED VIEW (BODY UNIT)--------------------20

6.4. PARTS LIST (BODY UNIT)----------------------------21

1 Specifications

2 Location of Controls and Components

3 Troubleshooting Guide

CONDITION CHECKPOINT FIGURE CHECK METHOD REMEDY

The Motor

doesn’t rotate. CORD REEL

UNIT

RAIL BASE

UNIT

• Check the continuity at both

ends of the Plug and both ends

of the Lead Wire Terminal of

the Cord Reel Unit. (Discon-

nection check)

• There must be no problems

between the Cord Reel Unit

and the Rail Base Unit (e.g.

burns in the contact, entry of

dust).

• If there is no continuity, replace

the Cord Reel Unit, or the Rail

Base Unit.

MOTOR • Check the continuity between

the terminals of the Motor.

• Confirm that the Motor can be

rotated by fingers without being

locked.

• Visually check for burns in the

Motor (e.g. burns in the coil).

• If there is a problem, replace

the Fan Motor Unit.

* Also check and replace

the Fuse.(on the P.C.B.

Assy)

FUSE • Check if the Fuse has blown.

Causes of fuse blowing:

1. Overcurrent

2. Burn of the Motor

3. Short-circuiting due to

incorrect wiring

• If the Fuse has blown, remove

the cause and replace the

Fuse.

*If a burn in the Motor caused

the Fuse to blow, then also

replace the Motor.

P.C.B. ASSY • Check the internal components

for problems.

(Burnt, melted, broken, etc.)

• There must be no broken foil of

the Printed Circuit Board.

• There must be no breaks in the

Lead Wires.

• If there is a problem, replace

the P.C.B. Assy.

TRIAC (on the

P.C.B. Assy) • Check the Triac by conducting

the following inspection. • If there is a problem, replace

the P.C.B. Assy.

ON/OFF

SWITCH

(in the P.C.B.

Assy)

• Check the continuity by press-

ing the On/Off Switch. • If there is a problem, replace

the P.C.B. Assy.

1. The Motor

doesn’t rotate.

2. The Power

Control doesn't

function.

TRIAC (on the

P.C.B. Assy) • Check that the Triac has not

been short-circuited.

If there is continuity between

T1 and T2, then there is a

problem in the components.

• If there is a problem, replace

the P.C.B. Assy.

POWER CON-

TROL VOL-

UME (in the

P.C.B. Assy)

• The resistance between A and

B must be switchable.

0~470Ω

• If there is a problem, replace

the P.C.B. Assy.

TheCordcannot

be pulled out. CORD REEL

UNIT

MOTOR CASE

UNIT

• If the Cord cannot be pulled

out, press the Brake Lever and

confirm that the Cord can be

rewound.

Repeat operations to rewind

and pull out the Cord two or

three times and confirm that it

can be normally rewound.

• If it is impossible to resolve the

problem due to an abnormal

condition of the Cord, separate

the Body, untwist the Cord, and

rewind it. Or, replace the Cord

Reel Unit and rewind the Cord.

1. The Cord can-

not be rewound.

2.The pulled out

Cord cannot be

locked.

Separate the Body and;

• Confirm that a sufficient num-

ber of spare turns have been

made.

• Confirm that the Cord Reel

Spring is working.

• Confirm that the Brake Lever

Unit is working correctly to stop

the Cord from rewinding.

• Make spare turns according to

the engraved number of turns,

or;

Replace the Cord Reel Unit.

Replace the Motor Case Unit.

1. The suction

power is low.

2. The Motor

stops during

vacuuming.

(The Thermo

Protector in the

Fan Motor Unit

works.)

DUST BAG

FILTER

EXTENSION

WAND　

HOSE C UNIT

Check for clogging with dust.

•DustBag

• Filter (in the Dust Box)

• Hose C Unit

• Extension Wand

Remove dust.

• Replace any broken Dust Bag,

Filter, and/or Hose C Unit.

CONDITION CHECKPOINT FIGURE CHECK METHOD REMEDY

4Disassembly and Assembly Instructions

Important: Always turn the vacuum cleaner is power off before replacing components.

Remove the power cord and plug from the mains.

* Attention

(1) When disassembling the vacuum cleaner, check the connections and wiring (pulling) of each component, and ensure that everything

is restored correctly once repairs are complete.

(2) Handle all disassembled components and packing with care, and be sure to replace any components that may be accidentally dam-

aged.

(3) Once repair operations are complete, always inspect the area around the repairs for any degradation, and ensure that all compo-

nents that were removed for repair have been replaced in the correct wiring configurations. It is also necessary to test the operation of

the vacuum cleaner and ensure that it is safe for subsequent use.

･ Insulation resistance:

Must be at least 5MΩ when a direct current of 500V is applied between the power plug terminals and the exterior of the motor.

･ Dielectric strength:

Must be able to withstand 1250V of alternating current applied between the power plug terminals and the exterior of the motor for

one minute.

(4) Do not make changes to models, components, or materials during repairs and services.

(5) If a wiring unit has been supplied as a spare part, the wiring unit must be simply replaced as it is, without any additional repairs or

connections made to even part of the wiring.

(6) Insert/remove the fast-on terminals by pushing/pulling them straight out without jiggling them or applying unnecessary force.

4.1. Disassembly of the Dust Cover Assy

1. Open the Dust Cover Assy and insert a slotted screwdriver in the gap between the Dust Cover Assy and the Upper

Body.

Move the slotted screwdriver in the direction of the arrow, and disassemble the Dust Cover Assy pulling upward.

Fig.1

4.2. Disassembly of the Dust Bag

Holder

1. Remove the Dust Bag Holder by inserting a slotted

screwdriver into the mount of the Dust Bag Holder on

the Lower Body Unit.

Fig.2

Caution (There is a Spring inside)

* When replacing the Dust Bag Holder, disassemble

and replace the Spring mounted inside.

Fig.3

4.3. Disassembly of Body Cover Assy, Switch Pedal, Cord Rewind Button

1. Remove the Filter Case

Fig.4

2. Remove 3 screws and disassemble the Body Cover Assy

Fig.5

3. Disassemble the Switch Pedal/Cord Rewind Button

toward the direction of the arrow

Caution: (Spring is placed inside.)

*Be careful not to lose the Spring.

Fig.6

4.4. Disassembly of Upper Body,

Handle Cover, and Guide Lever

1. Disassemble the Body Cover Assy and Switch Pedal as

described in (4.3).

Fig.7

2. Remove the Switch (part of the P.C.B. Assy) from the

Upper Body by pressing the tab in direction of the

arrow.

Fig.8

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Aspiradora de Panasonic

Panasonic

Panasonic MCV5241 - UPRIGHT VACUUM PLAT Manual de usuario

Panasonic

Panasonic MC-CL789 Manual de usuario

Panasonic

Panasonic MCV9626 - CANISTER VACUUM CLEA Manual de usuario

Panasonic

Panasonic MC-CG691-RA76 Manual de usuario

Panasonic

Panasonic MCV215 - COMMERCIAL VACUUM Manual de usuario

Panasonic

Panasonic MC-E780 Manual de usuario

Panasonic

Panasonic MC-CG475-BE7A Manual de usuario

Panasonic

Panasonic MC-CL609 Manual de usuario

Panasonic

Panasonic MC-GG523-00 Manual de usuario

Panasonic

Panasonic MCV9638 - CANISTER VAC.-PLAT Manual de usuario

Panasonic

Panasonic MC-GG529 Manual de usuario

Panasonic

Panasonic MC-YL669 Manual de usuario

Panasonic

Panasonic QuickDraw MC-V6950 Manual de usuario

Panasonic

Panasonic MCV5710 - UPRIGHT VACUUM-QKDR Manual de usuario

Panasonic

Panasonic MC-CG691K Manual de usuario

Panasonic

Panasonic MCV325 - COMMERCIAL VACUUM Manual de usuario

Panasonic

Panasonic Quickdraw M-CV5750 Manual de usuario

Panasonic

Panasonic MCV325 - COMMERCIAL VACUUM Manual de usuario

Panasonic

Panasonic MC-SBV01W543 Manual de usuario

Panasonic

Panasonic QuickDraw MC-V6945 Manual de usuario

Panasonic

Panasonic mc-ul592 Manual de usuario

Panasonic

Panasonic MC-CL676-ZC79 Manual de usuario

Panasonic

Panasonic Quickdraw MC-V5247 Manual de usuario

Panasonic

Panasonic MC-SB30JW147 Manual de usuario

Manuales populares de Aspiradora de otras marcas

Bissell

Bissell LittleGreen Proheat 1425 Series Manual de usuario

NEFF

NEFF N17XH10 0 Series Manual de usuario

LG A9 Series Manual de usuario

Oreck

Oreck Cordless Captura BK51700 Series Manual de usuario

Kogan

Kogan KAVACROBVWA Manual de usuario

Kränzle

Kränzle VENTOS 50 ID Guía del usuario

EVVO

EVVO Ai35 Manual de usuario

DeWalt

DeWalt DWH200D Manual de usuario

Pontec

Pontec Pondomatic Vacuum Cleaner Manual de usuario

Cleanmaxx

Cleanmaxx PC-P007E Manual de usuario

Exido

Exido 240-114 Manual de usuario

RIDGID

RIDGID WD1685AU0 Manual de usuario

Ezviz

Ezviz RE4P Manual de usuario

STG global

STG global TANVAC HDV3000 Manual de usuario

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manual de usuario

Factory

Factory M3340 Manual de usuario

Shop-Vac

Shop-Vac VN92 SERIES Manual de usuario

Nobles

Nobles 608669 Manual del producto