Panasonic Easa-Phone VA-123210 Manual de usuario

sle

MODEL

VA-123210

VA-30920

VA-l 2020

VA-1 2021

VA-l 2022

VA-120228

VA-82430

VA-82444

VA-30940D

VA-30941D

VA-30942D

VA-30965

VA-30960

VA-20861

Panasonic Company

Division of Matsushita Electric

Corporation of America

One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Hawaii, Inc.

99.659 lwaiwa Street P.O. Box 774

Honolulu Hawaii 96808-0774

Thank you for purchasing the Panasonic Easa-Phone VA-1232, Key Telephone System.

This system can connect eight central office lines and twenty four key telephones and DSS, door box, external paging amp and

external music source can be added.

Please read this manual carefully before the installation of this system.

Please follow the installation procedure described below.

Before connecting telephone lines, inform to telephone company of the following.

COLl COL7

Telephone numbers COL2 COL8

COL3 COL9

COL4 COLIO

COL5 COLI 1

COL6 COL12

Model number Panasonic VA-1 232 _

FCC registration number for VA-1232 KSU from factory ACK8GR-17656-KF-E

When modified to PBX (See page 18) ACK8GR-17655-MF-E

Factory interface code

Service order code

Ringer equivalence

Required network interface jack

02 LS2

9.OF

0.48

USOC RJI IW, RJI IC

1. SYSTEMCONNECTIONLAYOUT ....................................................... 1

2. INSTALLATION OF KEY SERVICE UNIT ................................................. 3

How to wall mount the key service unit ................................................... 3

3. INSTALLATIONOFKEYTELEPHONE.. ................................................. 5

How to wall mount the key telephone .................................................... 5

4. WIRINGCONNECTIONS ............................................................. 8

Connection between the KSU, Key TEL and CO/PBX line ....................................... 8

Typeofwires ..................................................................... 7

Wiringcables.. ................................................................... 8

5. CONNECTION OF OPTIONAL UNlT ..................................................... 9

Variation of card connection .......................................................... 9

Extension of CO/PBX line ............................................................ 10

Connection of direct station selector ..................................................... 11

Connections of single line telephone or -2 Key TELs/2 SLTs ...................................... 12

Connection of door box. ............................................................. 13

Connections of sensor and door opener. ................................................... 14

ConnectionofSMDR ............................................................... 15

External music on hold source and external paging system ....................................... 17

Set up for key service unit ............................................................ 18

8. CONNECTION OF POWER FAILURE UNIT ................................................ 19

7. SPECIFICATIONS OF SYSTEM ......................................................... 21

Modules and system configuration ....................................................... 21

System capacity and specifications ....................................................... 22

Check list of parts. ................................................................. 23

.............

le for initial set ...... 7

............ Priority

..................................... 152

........................ ications ......... 154

.........................

ing .............

...............

..............

Ut .......................

setting .................

~~~u~a~i~~ ...............

ialing ...................

....................

tion ..................

ing .......................

.......................

line.. ..................

e line s@i~~~i~~ .......

s~~~a~§. ................

se ......................

......................

assign ......................

call

ringing ...................

~ig~a~i~g .................... 67

rbQXCall.. ......................

~~~gi~~ .......................

aging .........................

t service setting .............. 7

tservice

................... 7

res~~~~~io~ class .............

Install the key service unit (KSU) on the wall according to the following procedure.

@ Slide the two hooks securing the KSU cover and the key service unit in the arrow direction, then remove the cover.

@ Place template against wall and install the four wood screws. Use the wood screw installation jig provided inside the

key service unit when installing the wood screws. ‘Z.

@ Install the key service unit by hooking the four installation holes at the bottom of the key service unit to the four wood ‘,ii

screws, then tighten the two left side wood screws completely.

“Be

sure

the power switch is OFF, before installation.”

Avoid installing in the following places. (Doing so may result in malfunction, noise, or discoloration)

a) In direct sunlight, hot, cold, or humid places. (Temperature range: 32’F - ‘l04’F)

b) Fulfuric gases produced in areas where there are thermal springs, etc. may damage the equipment or contacts.

c) Places in which shocks or vibrations are frequent or strong.

d) Dusty places, or places where water or oil may come into contact with the unit.

e) Near high-frequency sewing machines or electric welders.

f) On or near computers, telexs, or other office equipment, as well as microwave ovens or air conditioners. (It is preferable

not to install in the same room with the above equipment.) ;.

g) Near radio broadcast antennas. (including short wave)

h) Install at least 6 feet from radios and televisions. (both the key service unit and

key

telephones)

i) Do not obstruct area around the

key

service unit. (for reasons of maintenance and inspection - be especially careful to

allow space for cooling above

and at

the sides of the key service unit).

Install the key telephone on the wall according to the following procedure.

@ Pull handset guide, turn it upside

down, then insert it into its position.

@ Push the hooks at two places, then

remove the adapter.

@ Turn the adapter upside down, insert

the guides into two adapter mounting

holes provided at the lower portion of

the key telephone, then push in the

adapter.

@ Place the mounting holes of the

bracket over the studs of the modular

jack and pull the phone downward to

secure in place.

Short station cords are provided to

attach the key telephone.

Handset cord obtainable on the market.

VAX-20884 7 feet

VAX-20885 15 feet

Make connections between the KSU, Key TEL and the central office/PBX line (CO/PBX) according to the following procedure.

Connect COL No. 1 through No. 8

jacks provided inside the KSU to the

CO/PBX line, respectively.

onnect EXT No. IO through No. 33

is desirable to use an LCD

display type key telephone (VA-1 2022

43) that is used for the

ING purpose described

later. (see page 28.)

a Push in the cables from the top of

the cable guide.

c$ Remove the clamp plate, insert

the cords, then reinstall the clamp

plate over the cords and secure

into place with the screw.

Keep the loop wire resistance to the

key telephone furthest from the key

service unit less than 40 ohms. (Max.

1100 feet with 22 AWG cable)

Do not wire the telephone cabls in

parallel with the AC power source,

computer, telex etc. If the cables run

near those wires, shield the cables

within metal tubing or use shielded

cable and ground the shields.

When cables run on the floor, use pro-

tectors or the like to protect the wires

where they may be stepped on. Avoid

wiring under carpets.

When using an AC power supply (AC

12OV), make sure the unit is ground.

To key telephone

(a) If the key service unit and the exten-

sion are within 25 feet, use the cable

supplied (7 feet, 15 feet or 25 feet).

(See page 21)

(b) Station cord and Handset cord

Depending on the connection and

length, 4 types of station cords and 2

types of Mandset cords are available.

(See page 21)

extension are apart by more than 200

feet, please use quad cable. Quad

cables assure proper operation over

long distance than flat cables.

In this case, use connector (Modu-

lar-screw).

ing cables, either of the

following can be used (

Flat cable obtainable on the market.

les ex~~a~at~~~

rng quad cable depends upon the

KSU I

L 25 FEET

r__-----

Max option<

cord)

IT 200 FEET

(Max flat

cable)

MODULAR

CONNECTOR MODULAR

CONNECTOR

up to 1100 FEET

(Max quad cable)

TERMINAL BOX

MODULAR

CONNECTOR SCREW TERMINAL BOX

wiring length.

Make sure that the quad cables are

twisted pair or shielded twisted pair.

ate: Quad cables are not used for attach-

ing modular terminals.

lTerminall Modular Modular 1 Modular Screw

OTE Use the four conductor type Use this type when the quad cable

inline coupler. and door box unit is connected.

Flat cable Flat cable Flat cable Quad cable

COUPLlNG

OF CABLE

Otros manuales para Easa-Phone VA-123210

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema telefónico de Panasonic

Panasonic

Panasonic EASA-PHONE KX-T123210 Manual de usuario

Panasonic

Panasonic KX-TSC11 Manual de usuario

Panasonic

Panasonic Easa-Phone VA-208 Manual de usuario

Panasonic

Panasonic KX-TD816 Manual de usuario

Panasonic

Panasonic KX-TVS95 Manual de usuario

Panasonic

Panasonic KX-TS105BK Manual de usuario

Panasonic

Panasonic KX-TA82492 - Voice Message Expansion Card Manual de usuario

Panasonic

Panasonic KX -T61630 Manual de usuario

Panasonic

Panasonic KX-TVM200 Manual de usuario

Panasonic

Panasonic DBS 576 Section 300 Manual de usuario

Panasonic

Panasonic KX-TD816E Manual de usuario

Panasonic

Panasonic KX-TS500 Manual de usuario

Panasonic

Panasonic KX-TG5210M Manual de usuario

Panasonic

Panasonic TDA-600 Manual de usuario

Panasonic

Panasonic KX-TSC11HGW Manual de usuario

Panasonic

Panasonic KX-TD816E Manual de usuario

Panasonic

Panasonic KX-TVS90 Manual de usuario

Panasonic

Panasonic KX-T336 Manual de usuario

Panasonic

Panasonic KX-TA1232 Instrucciones de instalación y funcionamiento

Panasonic

Panasonic KX-TS840MX Manual de usuario

Panasonic

Panasonic KX-TD816E Manual de usuario

Panasonic

Panasonic KX-T77 Series Manual de usuario

Panasonic

Panasonic KX-TD308 Manual de usuario

Panasonic

Panasonic KX-TD816CE Manual de usuario

Manuales populares de Sistema telefónico de otras marcas

Teleco

Teleco Perfect Voice Tis 16 Manual de usuario

AT&T

AT&T Network Adapter 25 Manual de usuario

AVE

AVE AF902R-CE Manual de usuario

Tynetec

Tynetec Advent xt Manual de usuario

Ericsson

Ericsson DCT1800-S Manual de usuario

NEC

NEC Electra Elite 192 Manual de usuario

Alcatel

Alcatel EASY REFLEXES 4200 Manual de usuario

Bticino

Bticino PABX 28D Manual de usuario

NEC

NEC SL 2100 Manual de usuario

Sonifex

Sonifex Phone In 6 Manual de instrucciones

TransTel Communications

TransTel Communications TD-824i Instrucciones de montaje

Nortel

Nortel BCM50 Manual del producto

ASCOM

ASCOM TD 92375GB Manual del propietario

Karel

Karel MS26S Hoja de información del producto

EnGenius

EnGenius DuraFon PRO Manual de usuario

Teledat

Teledat X130 DSL Manual de usuario

SpectraLink

SpectraLink MOG400 Manual de usuario

LG-Nortel

LG-Nortel 300 Series Instrucciones de funcionamiento y seguridad