Panasonic WJ-ND300 Administrator Console Manual de usuario

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Administrator Console

Operating Instructions

Model No. WJ-ND300

Contents

Limitation of Liability ........................................................................................................3

Disclaimer of Warranty .................................................................................................... 3

Features .......................................................................................................................... 4

About Copyright and License ...................................................................................... 4

Trademarks and Registered Trademarks ................................................................... 4

System Requirement ................................................................................................... 4

Preparations .................................................................................................................... 5

Connections ................................................................................................................ 5

Performing the network settings of the network disk recorder .................................... 5

Performing the network settings of a PC ..................................................................... 5

Installing This Software ................................................................................................... 6

Uninstalling This Software ............................................................................................... 7

Start the Software ............................................................................................................ 8

About the Operation Window .......................................................................................... 10

Setting Items ................................................................................................................... 11

Download the Setting Values .......................................................................................... 14

Upload the Setup File ...................................................................................................... 16

Open the Setup File ........................................................................................................ 19

Save the Setup File ......................................................................................................... 20

Create a Setup File Newly ............................................................................................... 21

Convert the Version of the Setup File Format ................................................................. 22

Change the Password ..................................................................................................... 23

Error Messages ............................................................................................................... 24

Troubleshooting ............................................................................................................... 25

Limitation of Liability

THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS

FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.

THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.

CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS

PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).

Disclaimer of Warranty

IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. BE LIABLE TO ANY PARTY OR ANY

PERSON,

EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES,

INCLUDING BUT NOT LIMITED TO BELOW:

(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSE-

QUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;

(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION

OF THE USER;

(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;

(4) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYS-

TEM COMBINED BY THE DEVICES OF THIRD PARTY.

(5) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHO-

TOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-

CAMERA’S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED

FOR THE PURPOSE OTHER THAN SURVEILLANCE

Features

The WJ-ND300 Administrator Console is the exclusive setup tool for the Network Disk Recorder WJ-ND300.

By using this software, it is possible to perform the settings of the network disk recorder using a PC via a network.

It is also possible to download the setting values and save it as a setup file, and upload the edited setup file to the

network disk recorder.

This software is applicable for version 2.0 or later of the WJ-ND300.

About Copyright and License

This software can be distributed and used only if you agree to the copyright and license agreement of this software.

Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export

laws of the software provided with this product are expressly prohibited.

Trademarks and Registered Trademarks

• Microsoft®, Windows®and Windows®XP are registered trademarks of Microsoft Corporation in the U.S. and/or

other countries.

• Intel®and Pentium®are trademarks of Intel Corporation.

• Adobe®, Adobe logos, and Acrobat®are registered trademarks of Adobe Systems Incorporated in the U.S.

and/or other countries.

• Other names of companies and products contained in these operating instructions may be trademarks or regis-

tered trademarks of their respective owners.

System Requirement

It is recommended to install this software on a PC that meets the following system requirements.

OS: Microsoft®Windows®2000 Professional SP4

Microsoft®Windows®XP Professional or Home Edition SP2

Note: It is required that Microsoft .NET Framework 1.1 is installed on the PC being used to

activate this software. (If Microsoft .NET Framework 1.1 is not installed on a PC, it will

be installed automatically when installing this software.)

CPU: Pentium®4 1.4 GHz or faster

Memory: 512 MB or more

CD-ROM drive: Required for the installation of this software

Hard disk drive: Approx. 160 MB of available disk space for installation

Monitor: 1 024 x 768 pixels or more, 16-bit HIGH color or better

Network Interface: 10/100 Mbps Network interface card must be installed

ALARM

SUSPEND

OPERATE

ERROR TIMER REC 1-LINK/ACT-2

HDD1 HDD2 HDD3 HDD4

ESC SET

PULL

Network Disk Recorder

WJ-ND

WJ-ND300

Network

Preparations

It is necessary to complete the connections between a PC and the network disk recorder and perform the network

settings of the PC and the network disk recorder respectively.

Connections

There are 2 methods to connect a PC and the network disk recorder:

•Connecting a PC and the network disk recorder directly

•Connecting a PC to the network disk recorder via a hub or a router

When connecting a PC to the network disk recorder, the required hardware and cables are different depending on

the system configuration. Prepare before starting connection.

Refer to the Setup Instructions (PDF) of the network disk recorder for descriptions of how to perform the network set-

tings.

Performing the network settings of the network disk recorder

Use the buttons on the front panel of the network disk recorder or a web browser on the connected PC to conform to

the network settings to the network environment of the PC.

Refer to the Setup Instructions (PDF) of the network disk recorder for further information about the network settings.

Performing the network settings of a PC

Change the TCP/IP setting of the PC on which this software is to be installed to conform to the network settings of

the network disk recorder.

It is required to set the IP address of the PC to "192.168.1.XX (a number from 2 to 254)" to access the network disk

recorder.

Refer to the Installation Guide (book) and the Setup Instructions (PDF) of the network disk recorder for descriptions

of how to perform the network settings of a PC.

Adobe®Reader: Adobe®Reader should be installed on a PC to read these operating instructions. When the Adobe®

Reader is not installed on the PC, download the latest Adobe®Reader from the Adobe web site and install it.

Notes:

•This software must be installed or started by the administrator. Otherwise, any problems will not be covered by

the warranty.

•In these operating instructions, the settings are performed on Windows XP as examples.

Installing This Software

Notes:

•If Microsoft .NET Framework 1.1 is not installed on a

PC, it will be installed automatically when installing

this software.

It is possible to check with "Control Panel" whether

Microsoft .NET Framework 1.1 is installed on a PC

or not.

Open the "Change or Remove Programs" window by

selecting "Add or Remove Programs" in "Control

Panel".

The installed applications will be displayed in list

form.

Check if "Microsoft .NET Framework 1.1" is on the

list or not.

•When re-installing this software is needed, the exist-

ing software must be uninstalled first.

Install this software as follows after completing the network settings of the network disk recorder and PC.

Step 1

Insert the provided CD-ROM into the PC disk drive.

Step 2

Double click "setup.exe" in the "Admin" folder.

The confirmation window will be displayed.

Step 3

Click the "OK" button and follow the installation wizard to install this software.

The "WJ-ND300 Administrator Console" folder will be created (C:\Program Files\Panasonic\WJ-ND300 Administrator

Console) and the necessary files will be copied in it.

When installation is complete, the application will be added to "Programs" in "Start" and the shortcut will be created

on the desktop.

Important:

Do not edit, remove, or move the directory path of the files above. Otherwise, this software may not function

properly.

Uninstalling This Software

If required, uninstall this software as follows.

Step 1

Open "Add or Remove Programs" in "Control Panel".

The "Add or Remove Programs" window will be displayed.

Step 2

Select "WJ-ND300 Administrator Console" and click the "Remove" button.

Step 3

Follow the uninstall wizard.

Start the Software

Screenshot 1

Start just after the PC is started up. Step 1

Select "WJ-ND300 Administrator Console" from the

"Start" menu ("Start" - "All Programs" - "Panasonic" -

"WJ-ND300 Administrator Console") or double click the

shortcut icon of "WJ-ND300 Administrator Console" on

the desktop.

The software will start up.

Important:

the software.

Start the software as follows.

Screenshot 2

The login window will be displayed. Step 2

Enter the password.

The default password is "12345".

Refer to page 22 for how to change the password.

Step 3

Click the [OK] button.

Screenshot 3

The version selection window will be displayed. Step 4

Select the version of the setup file to be created.

Step 5

Click the [OK] button.

Screenshot 4

The top page of the operation window will be displayed. Step 6

Perform the settings for each item.

Step 7

Click the [SET] button after completing the settings.

Step 8

Close the window by clicking the button at the top

right of the window to exit the software.

Note:

It is possible to check version of the setup menu by displaying the "Product Information" page of "Maintenance"

on the setup menu (Advanced) using a web browser.

Refer to the Setup Instructions (PDF) of the network disk recorder.

Tool bar

[Upload]: The setup file created/edited using this

software will be uploaded to the network disk

recorder by clicking this button. (page 16)

[Download]: The setting values will be down-

loaded from the network disk recorder by clicking

this button. (page 14)

[Open]: Click this button to open the saved

setup file. (page 19)

[New]: Click this button to create a new setup

file. (page 21)

[Save As]: Click this button to save the creat-

ed/edited setup file. (page 20)

[Version conversion]: Click this button to con-

vert the version of the setup file format. The ver-

sion of the setup file format can be upgraded

when the version of the setup file format is 2.xx.

[Password]: Click this button to change the login

password. (page 23)

Menu tabs: It is possible to display the respective set-

tings page of the clicked menu tab.

Refer to page 11 for further information about each

menu.

It is possible to display the top page of "Quick Setup

Menu" by clicking the "Quick Setup Menu" link text

at the bottom left of the window.

(When "Quick Setup Menu" is displayed, the

"Advanced Setup Menu" link text will be displayed at

the bottom left of the window. It is possible to display

the top page of "Advanced Setup Menu" by clicking

it.

Main area: The setting items of the selected menu will

be displayed in this area.

:Click this button to apply the edited settings.

:Click this button to cancel to apply the edited

settings.

Note:

When the version of the WJ-ND300 in use is 3.xx or

later, this icon will not be displayed.

About the Operation Window

Menu tabs

Tool bar

Main area

Otros manuales para WJ-ND300 Administrator Console

Tabla de contenidos

Otros manuales de Software de Panasonic

Panasonic

Panasonic WJMPU955 - PROCESSING UNIT - TMU Manual de usuario

Panasonic

Panasonic BB-HPN15A Manual de instrucciones

Panasonic

Panasonic WV-ASC970 Manual de usuario

Panasonic

Panasonic Australia Asset Library Manual de usuario

Panasonic

Panasonic SZ-CB8P Manual de usuario

Panasonic

Panasonic Avccam AG-AF100A Series Manual de usuario

Panasonic

Panasonic WJ-ASC960 Manual de usuario

Panasonic

Panasonic IMAGE STUDIO Ver.3.0.0 Manual de usuario

Panasonic

Panasonic WJMPU955 - PROCESSING UNIT - TMU Manual de usuario

Panasonic

Panasonic WORKIO DP-130 Manual de usuario

Panasonic

Panasonic Lumix VQT0U14 ( ) Manual de usuario

Panasonic

Panasonic PT-LW80NT Manual de usuario

Panasonic

Panasonic PT-LB90NT Manual de usuario

Panasonic

Panasonic Workio DP-2310 Manual de usuario

Panasonic

Panasonic Workio DP-3510 Manual de usuario

Panasonic

Panasonic PT-D10000 Series Manual de instrucciones

Panasonic

Panasonic Avccam AG-AF100A Series Manual de usuario

Panasonic

Panasonic RQT6118-Y Especificaciones técnicas

Panasonic

Panasonic Workio DP-2310 Manual de usuario

Panasonic

Panasonic PT-F100NT Instrucciones de instalación y mantenimiento

Panasonic

Panasonic WJMPU955A - CENTRAL PROCESSING UNIT Manual de usuario

Panasonic

Panasonic WORKIO DP-1810 Manual de usuario

Panasonic

Panasonic Voice Editing Ver.2.0 Manual de usuario

Panasonic

Panasonic HNP11 Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario