Panasonic KX-HCM10 Manual de usuario

Please read this manual before using and save this manual for future reference.

Panasonic Network Camera Site: http://www.panasonic.com/netcam



for customers in the USA or Puerto Rico

Operating Instructions

Additional Feature table

The features described below are added in accordance with our modifications in

the product specifications. Read both Operating Instructions manuals before

starting to use the product.

Additional Feature Page

Viewing Buffered Image Screen

Images can be buffered in the internal memory of the Network

Camera. They can be viewed by clicking [Start Capture] on

Capture screen. Alarm/Timer mode in the Image Transfer on

page 12 can also buffer images.

Page 4—Page 5

Viewing still images on your mobile phone

Acompatiblemobilephoneallowsyou toviewstillimagesover

the Internet aswell as control the motionand zoom settings of

the camera (depends on model).

Page 6—Page 7

Some changes in the look of the Network window

(KX-HCM250 and KX-HCM270 only)

The Network Camera has some changes in the look of the

Network window: two modifications and two additions.

Page 8—Page 9

Adjusting Clock for Daylight Saving Time

Adjust Clock for Daylight Saving Time is added on Name/

Time window.

Page 10

Time Zone at Auto Adjustment

The Daylight Times in the pull-down menu for the Time Zone

at [3. Auto Adjustment] on Name/Time window have been

deleted.

Page 11

Transferring Camera Images

The Network Camera can buffer images and send them via E-

mail or FTP by configuring Image Transfer. Capture, Alarm

and Timer can be used simultaneously by checking [Enable]

for Controls on each of their Image Transfer windows.

Page 12—Page 14

Using the Preset Control (Except KX-HCM8)

Pan/Tilt/Preset Control on the Camera Setup window is

divided into two controls: Pan/Tilt Control and Preset Control.

Preset Control can be enabled or disabled independently.

Page 15

Operating Instructions

Note

HCM logos on all window backgrounds are deleted.

Digital Zoom (KX-HCM280 only)

The 2x digital zoom feature is added. The Network Camera

hasa 42x magnifying capacity: the 21x magnifying capacity of

the optical zoom and 2x magnifying capacity of the digital

zoom.

Page 16

Using the Color Night View (KX-HCM280 only)

The Color Night View of the Network Camera enables you to

view color images of objects even in the dark.

Page 17

Default Setting List ............................................................ Page 18

Additional Feature Page

Operating Instructions

Viewing Buffered Image Screen

Images can bebuffered in the internal memory of the Network Camera. They can

be viewed by clicking [Start Capture] on Capture screen. Alarm/Timer mode in

the Image Transfer on page 12 can also buffer images.

The look of Buffered Image on the operation bar differs depending on the setting

for Trigger Setting on Image Transfer window. The names of enabled trigger

settings will be displayed as follows. Refer to page 12 about the Image Transfer

feature.

The screen differs depending on

clicking [Alarm] or [Timer] on



the operation bar.The screen



on the left shows Alarm.

The current images will be



buffered in the internal memory



of the Network Camera.

Added

Capture, Alarm and



Timer are all enabled.

Capture alone



is enabled.

Operating Instructions

Notes

• The refresh interval becomes longer as more clients access the

Network Camera.

• The image resolution, image quality and object situation affect the

number of frames in the buffered image.

• If internal memory is filled after clicking [Start Capture], the image

buffering will stop automatically.

• If [Start Capture] is clicked again, buffered images will be all erased,

and new images will be buffered in the internal memory.

• If [Start Capture] is started on one PC while viewing buffered images

on another, the images will be overwritten.

• The internal memory will be divided by the number of trigger settings in

Image Transfer. If all three trigger settings are enabled, the Network

Cameracanbufferapproximately26frames(KX-HCM8/KX-HCM10)or

186 frames (KX-HCM230/KX-HCM250/KX-HCM270/KX-HCM280) for

each trigger setting at a resolution of 320 x 240 in standard.

[Start Capture] : The images will be buffered in the internal memory of the

Network Camera. Network traffic, PC performance,

image quality and image resolution influence playing

duration time and the refresh interval of the image. The

resolution is the same as the current image settings. At a

resolution of 320 x 240 in standard, the Network Camera

buffers approximately 80 frames (KX-HCM8/KX-HCM10)

or 560 frames (KX-HCM230/KX-HCM250/KX-HCM270/

KX-HCM280).

[Primary] :[Primary] enables you to view the buffered image in the

primary time in the Alarm/Timer mode.

[Secondary] :[Secondary] enables you to view the buffered image in

the secondary time in the Alarm/Timer mode.

Operating Instructions

Viewing still images on your mobile phone

A compatiblemobile phone allows you toviewstill images over theInternet aswell

as control the motion and zoom settings of the camera (depends on model).

Enter"http://IP address (or URL):Port No./mobile" on a mobile phone and press

[OK]. (e.g., http://bob.viewnetcam.com:60001/mobile would show a camera

connected on port 60001.) A still image appears. Motion images cannot be

displayed.

(When the port number is set to 80 [default], it is not required.)

Registered presets 5-8 are available by activating the lin

on the mobile phone screen.

Pressing 1, 3, 7 or 9 on the keypad allows you to use



the first four registered preset positions (Preset 1, 2, 3



and 4).

Pressing 2, 4, 6 or 8 on some phones allows you to



pan and tilt a Network Camera in four directions:



Left, Up, Down and Right.

Tele button

( )

zooms in, and Wide button (#) zooms out

(KX-HCM280 only).

Pressing 5 will refresh the image.

160x120 resolution is displayed at the first access.



Pressing 0 switches the resolution to 320x240.

On certain compatible phones, the keypad has been



linked to the hyperlinks on the web page.

Added

Operating Instructions

Notes

• Dialing numbers(1),(3),(7)and(9)aredisplayedinascendingorder.Thelinks

for fifth to eighth preset images are displayed only with their preset names and

not with dialing numbers.

• KX-HCM10,KX-HCM230,KX-HCM250andKX-HCM270cannotuseTeleand

Wide.

• KX-HCM8 can control only Refresh and Resolution.

• Some mobile phones are not compatible with Panasonic Network Cameras.

Some phones may allow viewing only on port number 80, and some may not

support password authentication. Refer to the Network Camera Technical

Support Site at http://panasonic.co.jp/pcc/en/ for a list of mobile phone

models, and the compatibility level which has been verified with the Panasonic

Network Camera.

• Some mobile phones cannot display 320 x 240 resolution depending on their

models. Refer to the Network Camera Technical Support Site at

http://panasonic.co.jp/pcc/en for the models that Panasonic has verified

with the Network Camera.

• Some mobile phones display images not at the specified resolution but at a

decreased size.

• When Pan/Tilt/Zoom operation reaches the end, the keypad number and the

character disappear.

"(4)L" disappears.

Operating Instructions

Some changes inthe look of the Network window

(KX-HCM250 and KX-HCM270 only)

DisclosingOperatingInstructions of wirelessmodelsfrom this page

is strictly prohibited by export controls.

Please call Panasonic Customer Support(1-800-272-7033) for assistance.

We apologize for any inconvenience this may cause.

Added

Modified



Modified



OperatingInstructions

Disclosing Operating Instructions of wireless models from this page

isstrictly prohibited by export controls.

Please call Panasonic Customer Support(1-800-272-7033) for assistance.

Added

Operating Instructions

Adjusting Clock for Daylight Saving Time

Adjust Clock for Daylight Saving Time is added on Name/Time window.

Instructions for the data field

Adjust

Clock for

Daylight

Saving

Time

During Daylight Saving Time, the clock will shift one hour

forward at the set time on the Start Day, and move back one

hour at the set time on the End Day.

Note

An "s" is put between date and time of time stamp when

enabling Adjust Clock for Daylight Saving Time. The

time stamp will be attached to the transferred images by

Image Transfer feature.

Added

Otros manuales para KX-HCM10

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Panasonic

Panasonic

Panasonic VL-WD812EX Manual técnico

Panasonic

Panasonic WV-CP100 Manual de usuario

Panasonic

Panasonic WV-CF400 Manual de usuario

Panasonic

Panasonic KX-HCM280A Manual de usuario

Panasonic

Panasonic GP-KR521 Manual de usuario

Panasonic

Panasonic BB-HGW700A - Network Camera Router Manual de usuario

Panasonic

Panasonic Super Dynamic III WV-CS950 Manual de usuario

Panasonic

Panasonic WV-SF342 Manual de usuario

Panasonic

Panasonic WV-CW590G Manual de usuario

Panasonic

Panasonic WVCS574 - COLOR CCTV CAMERA Manual de usuario

Panasonic

Panasonic WVCS574 - COLOR CCTV CAMERA Manual de usuario

Panasonic

Panasonic KX-HCM10 Manual de usuario

Panasonic

Panasonic Super Dynamic III WV-CP480 Manual de usuario

Panasonic

Panasonic AK-HC1500G Manual de usuario

Panasonic

Panasonic BB-HCM531A - Network Camera Manual de usuario

Panasonic

Panasonic WV-S4576L Guía de instalación

Panasonic

Panasonic AWE300S - SEPERATE CAMERA Manual de usuario

Panasonic

Panasonic III PLUS Manual de usuario

Panasonic

Panasonic WV-CL920A Series Manual de usuario

Panasonic

Panasonic WV-CP240EX Manual de usuario

Panasonic

Panasonic KX-HNC200E Manual de usuario

Panasonic

Panasonic WVBF102 - CCTV CAMERA Manual de usuario

Panasonic

Panasonic WV-CF224 Manual de usuario

Panasonic

Panasonic WV-SW396 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario