Panasonic BL-C30C Manual de usuario

Operating Instructions

Network Camera

Model No.

BL-C30C

Please read this manual before using and save this manual for future reference.

Operating Instructions

Main Features

Wireless Communication

Network Camera corresponds to the wireless system based on IEEE 802.11b/g.

Wireless installation will play an increasing role in flexible mounting.

Communication via Ethernet cable is also available. Encryption establishes the

security on the wireless network.

Various remote monitoring features

• Pyroelectric infrared sensor*1 detects temperature differences caused by a

human body or animals.

• Detection can let camera transfer images by E-mail or FTP*2.

• Color night view mode (auto-adjusted) enables the camera to display images

even in 1 lx illuminance*3.

Monitoring from PC or cell phone

• The camera images can be monitored over the Internet.

• Pan/tilt operation can move the lens horizontally from –50 ° to +50 ° and

vertically from –40 ° to +10 °.

Privacy mode

• Privacy mode hides the lens into the unit to protect privacy.

• Pressing the privacy button on the front of the camera switches privacy mode

on or off with a single touch.

*1 The sensor uses pyroelectric effect. Due to the effects of environment temperature, direct

sunlight or air conditioner, it may detect the temperature differences by mistake, or the

detection range may be shortened.

*2 It may take some time to transfer images depending on the network condition.

*3 1 lx is the brightness about 2.5 m (8.2 feet) away from auxiliary fluorescent light. Color night

view mode slows down the frame rate, and images may blur when viewing a moving object or

using the pan/tilt operation.

Privacy Monitoring Purpose

Privacy mode On Disabled Protecting privacy

Monitoring Off Enabled Remote monitoring

Operating Instructions

Easy installation using UPnPTM (Universal Plug and Play)

When connecting the camera with a UPnPTM enabled router, the camera

automatically configures its network settings.

Supporting Viewnetcam.com service

Viewnetcam.com service allows you to access the camera over the Internet with

your favorite domain name (e.g. bob.viewnetcam.com) instead of a global IP

address.

Multi-Language Display

Top page, Single Camera and Multi-Camera page can be displayed in English,

French, German, Italian, Spanish, Russian, Simplified Chinese or Japanese. If you

select English, Japanese or French, all pages can be changed. But if you select

other language, the Setup, Maintenance and Support pages are displayed only in

English.

*Some UPnPTM enabled routers cannot configure the camera automatically. In

this case, the router needs to be configured manually. Ask the router

manufacturer how to configure it. See Panasonic Network Camera support

website at

http://panasonic.co.jp/pcc/products/en/netwkcam/ for more information.

*Viewnetcam.com service is the service for Panasonic Network Cameras. See

Viewnetcam.com website (http://www.viewnetcam.com) for more

information.

Operating Instructions

System Requirements for your PC

Your PC (Personal Computer) and network must meet the following technical

specifications for the camera to work properly.

Note

See Panasonic Network Camera support website at

http://panasonic.co.jp/pcc/products/en/netwkcam/ for the latest

information about web browser.

Trademarks

• Adobe, Acrobat and Reader are either registered trademarks or trademarks of

Adobe Systems Incorporated in the United States and/or other countries.

• Microsoft, Windows, Hotmail and ActiveX are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other

countries.

• Pentium is a trademark or registered trademark of Intel Corporation or its

subsidiaries in the United States and other countries.

• Screen shots reprinted with permission from Microsoft Corporation.

• All other trademarks identified herein are the property of their respective

owners.

Abbreviations

• UPnP is the abbreviation for "Universal Plug and Play".

• "Network Camera" is called "Camera" in these Operating Instructions.

Item Description

Operating

System

Microsoft®Windows®XP, Microsoft®Windows®2000

Microsoft®Windows®Me, Microsoft®Windows®98SE

CPU Pentium®III (500 MHz or greater is recommended.)

Protocol TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)

Interface 10/100 Mbps network interface installed

Web Browser Internet Explorer 6.0 or later (Not included on the Setup CD-

ROM)

Operating Instructions

IMPORTANT SAFETY INSTRUCTIONS

When using this unit, basic safety precautions should always be followed to reduce

the risk of fire, electric shock, or personal injury.

1. Read and understand all instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. After removing the dust on the lens, wipe the lens with a cotton swab.

6. Do not install near any heat sources such as radiators, heat registers, stoves,

or other devices (including amplifiers) that produce heat.

7. Protect the AC adaptor cord and AC cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where they exit

from the unit.

8. The AC cord is used as the main disconnect device, ensure that the socket-

outlet is located/installed near the equipment and is easily accessible.

9. Do not touch the unit, AC adaptor, AC adaptor cord or AC cord during lightning

storms.

10. Unplug the unit when unused for long periods of time.

11. Refer all servicing to qualified service personnel. Servicing is required when

the unit has been damaged in any way, such as the AC adaptor cord, AC cord

or plug is damaged, the unit does not operate normally, or has been dropped.

12. Prolonged exposure to direct sunlight or halogen light may damage the CMOS

sensor.

13. The camera is intended for indoor use only. Please check local regulations as

outdoor use of the wireless feature is restricted in some countries/areas.

14. Unplug this unit from power outlets if it emits smoke, an abnormal smell or

makes unusual noise. These conditions can cause fire or electric shock.

Confirm that smoke has stopped and contact an authorized service center.

User Name and Password Protection

The use of a unique User Name and secret Password is an important tool that

will help limit unauthorized individuals from accessing the camera. If you

choose to disable this tool, and choose not to limit access by use of a User

Name and Password, this may result in access to the camera by

unauthorized individuals. (See page 49)

SAVE THESE INSTRUCTIONS

Operating Instructions

Table of Contents

1 Camera Monitoring .......................................................8

1.1 Accessing the Camera................................................................... 8

1.2 Viewing Single Camera page....................................................... 10

1.2.1 Image Auto Centering (Click to Center)................................................... 15

1.2.2 Capturing a Still Image ............................................................................ 16

1.2.3 Using Operation Bar ................................................................................ 17

1.2.4 Setting Home Position/Sensor Position/Preset Button............................. 19

1.3 Viewing Multi-Camera page......................................................... 23

1.4 Viewing Buffered Image page...................................................... 25

1.4.1 Deleting Buffered Images ........................................................................ 26

1.5 Viewing Still Images on Your Cell Phone ..................................... 27

2 Various Camera Features ...........................................29

2.1 Using Camera Features............................................................... 29

2.2 Connecting the Camera to Your Network..................................... 32

2.3 Using Wireless LAN..................................................................... 37

2.4 Using UPnP™ (Universal Plug and Play) .................................... 40

2.5 Registering with the Viewnetcam.com service ............................ 41

2.6 Setting Date and Time ................................................................. 43

2.7 Changing Camera Settings.......................................................... 45

2.8 Changing Authentication Setting and Administrator User Name

and Password .............................................................................. 49

2.9 Logging in to the Camera............................................................. 52

2.10 Creating, Modifying or Deleting General Users ........................... 53

2.11 Changing Initial Settings on the Single Camera page or the Multi-

Camera page ............................................................................... 55

2.12 Configuring Multiple Cameras...................................................... 58

2.13 Buffering or Transferring Images by Timer................................... 60

2.14 Buffering or Transferring Images by Sensor................................. 69

2.15 Specifying Operation Time........................................................... 81

2.16 Changing Indicator Display .......................................................... 83

2.17 Enabling Privacy Mode ................................................................ 84

Operating Instructions

3 Camera Maintenance ..................................................85

3.1 Maintenance page ....................................................................... 85

3.1.1 Confirming the Status.............................................................................. 86

3.1.2 Confirming the Wireless Status............................................................... 86

3.1.3 Restarting the Camera ............................................................................ 87

3.1.4 Updating the Camera Firmware .............................................................. 88

3.1.5 Creating Configuration File...................................................................... 91

3.1.6 Loading Settings from a Configuration File ............................................. 92

3.1.7 Resetting the Camera to Factory Default ................................................ 93

3.2 Support page ............................................................................... 94

3.2.1 Help page ................................................................................................ 94

3.2.2 Wireless Help page ................................................................................. 95

3.2.3 Product Information ................................................................................. 95

3.2.4 Support Information................................................................................. 95

3.3 FACTORY DEFAULT RESET Button............................................ 96

3.4 Default Setting List....................................................................... 97

3.5 Cleaning..................................................................................... 105

3.5.1 Cleaning the Main Unit .......................................................................... 105

3.5.2 Cleaning the Lens.................................................................................. 105

3.6 Setting an IP Address on Your PC ............................................. 106

3.7 Using Setup Program................................................................. 107

3.8 Setting Your PC.......................................................................... 110

3.8.1 Setting the Proxy Server Settings on Web Browser ............................. 110

3.8.2 Setting UPnP™ to Display Camera Shortcut in My Network Places..... 113

3.8.3 Setting the Internet Temporary File Setting on Web Browser................ 113

3.9 ASCII Character Table ............................................................... 114

3.10 File Size and Number of Buffered Images ................................. 115

3.11 Specifications............................................................................. 116

Index..................................................................................119

Operating Instructions

1 Camera Monitoring

1.1 Accessing the Camera

1. Start up the web browser on your PC.

2. Enter "http://IP Address (or URL):Port Number" on the address bar, and

press [Enter] on the keyboard.

• When port number is 80 (default), you do not need to enter port number.

See page 34 for details about port number.

• If the camera image is not displayed, see page 25 and page 26 of the

Installation/Troubleshooting guide.

3. The Enter Network Password window is displayed, and enter the user name

and password that were set, and click [OK].

Note

When [Permit access from guest users] is set on the Security: Administrator

page, the authentication window will not be displayed.

E.g. http://192.168.0.253:50000

(or http:// .viewnetcam.com:50000)

Operating Instructions

4. Click the following tabs to display each page.

Note

When users other than an administrator are accessing the camera, the [Setup]

and [Maintenance] tab will not be displayed. Additionally, when [Do not permit

access from guest users] is set on the Security: Administrator page, the [Login]

tab will not be displayed.

5. Close the web browser.

ATo Single Camera page (page 10)BTo Multi-Camera page (page 23)

CTo Buffered Image page (page 25)DTo Setup page (page 29)

ETo Maintenance page (page 85)FTo Support page (page 94)

GTo log in to the camera (page 52)

A B C D E F

Select a language.

Version Number

Operating Instructions

1.2 Viewing Single Camera page

1. Access the camera (see page 8).

• The Top page is displayed.

2. Click the [Single] tab at the top of the page.

• When the Security Warning window is displayed, click [Yes] (see page 12).

• See page 13 for the Security Warning window when using Microsoft

Windows XP Service Pack 2.

3. Close the web browser.

Notes

• While viewing images under fluorescent lighting, the image may appear

noisy or experience flicker if the incorrect AC power setting was selected.

Select the frequency that is used in your area. (see page 45).

• When the camera image is not displayed correctly, click [Refresh] at the

tool bar on the web browser. The image will be refreshed.

• Refresh interval is [Motion] by default. You can change it on the operation

bar (see page 17).

• Refresh interval may change depending on the network condition, PC

performance and what object you view.

• When displaying video (Motion JPEG), the camera allows up to 20

simultaneous accesses. When trying more than 20 accesses, the 21st

user will see a gray screen. (Maximum 20 accesses for a Buffered Image

page too.)

• If the video (Motion JPEG) display is limited (see page 55), the video will

be changed to refreshing still images.

Capture Image

Button

(See page 16)

Operation Bar

(See page 17)

Refresh

Interval

(See page 17)

Click to Center

(See page 15)

Camera Image

The banner is

displayed.

(See page 14)

Tabla de contenidos

Otros manuales de Cámara de seguridad de Panasonic

Panasonic

Panasonic WV-NP240 series Manual de usuario

Panasonic

Panasonic PPDW12 Hoja de instrucciones

Panasonic

Panasonic WV-S2500 Series Manual de usuario

Panasonic

Panasonic BL-VT164W Manual de usuario

Panasonic

Panasonic i-pro WV-NP1004 Manual de usuario

Panasonic

Panasonic WV-SFV631L Manual de usuario

Panasonic

Panasonic WVBP330 - B/W CCTV CAMERA Manual de usuario

Panasonic

Panasonic WVCS854 - COMBINATION CAMERA Manual de instrucciones

Panasonic

Panasonic WV-S2231L Manual de funcionamiento

Panasonic

Panasonic WVCP120 - COLOR CCTV CAMERA Manual de usuario

Panasonic

Panasonic WV-CP620/G Series Manual de usuario

Panasonic

Panasonic WV-CL920A Series Manual de usuario

Panasonic

Panasonic BL-C230A Manual de usuario

Panasonic

Panasonic WV-SC384 Manual de usuario

Panasonic

Panasonic WV-X6531N Manual de funcionamiento

Panasonic

Panasonic WV-CW374 Manual de usuario

Panasonic

Panasonic WV-NS320 Manual de usuario

Panasonic

Panasonic BB-HCM531 Manual de funcionamiento

Panasonic

Panasonic WV-CW594A Manual de usuario

Panasonic

Panasonic WV-CW384E Manual de usuario

Panasonic

Panasonic WV-S1132 Manual de funcionamiento

Panasonic

Panasonic WV-SFV311 Manual de funcionamiento

Panasonic

Panasonic WVMG14 - CCTV CAMERA Manual de usuario

Panasonic

Panasonic IDEHAL WV-SUD638PJ Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario