Panasonic ET-D3LEW60C Manual de usuario

Commercial Use

Model No. ET-D3LEW60C

ET-D3LES20C

ET-D3LEW50C

DPQX1280ZB

Projection Lens 　　　　　　　　　

Operating Instructions

Thank you for purchasing this Panasonic product.

■To ensure correct use of this lens, please read the operating instructions supplied

with the lens and the projector carefully.

■Before using this product, be sure to read “Read this rst!” (Page 3).

■Please save this manual for future use.

ET-D3LEW60C ET-D3LES20C

ET-D3LEW50C

Read before use

This document is intended for the various projection lenses that can be attached to

and used in conjunction with Panasonic projectors.

For Model No. and model names, refer to the product list (Page 4).

ENGLISH

2-ENGLISH

Read this rst! ......................................................................................3

Before Use.............................................................................................4

Attaching the Lens / Detaching the Lens...........................................5

Before replacing the projection lens........................................................ 5

Attaching the Lens...................................................................................5

Peripheral focus adjustment function ...................................................... 7

Lens calibration ....................................................................................... 8

Removing the Lens ............................................................................... 11

Projection relationships.....................................................................12

Lens shift ranges................................................................................14

Specications .....................................................................................16

Dimensions .........................................................................................16

rojected image size and Projection distance....... 附表 / Appendix 1

█ Contents

ENGLISH-3

Read this rst! Always follow these precautions

WARNING:

Do not look at or place your skin into the light emitted from the lens while the

projector is being used.

Doing so can cause burns or loss of sight.

zStrong light is emitted from the projector’s lens. Do not look at or place your hands

directly into this light.

zTurn off the power when moving away from the projection lens or projector.

Do not project an image with the lens cover attached.

zDoing so can cause re.

CAUTION:

Before replacing the projection lens, be sure to turn off the power and

disconnect the power plug from the wall outlet.

zUnexpected projection of light may cause injury to eyes.

zReplacing the projection lens without removing the power plug may result in electric

shock.

Do not stand in front of the lens while the projector is being used.

Doing so can cause damage and burns to clothing.

zStrong light is emitted from the projector’s lens.

Do not place objects in front of the lens while the projector is being used.

Doing so can cause re, damage to the object, or malfunction of the lens and

projector.

zStrong light is emitted from the projector’s lens.

Do not open the desiccant bag. Do not eat the contents.

Inadvertently ingesting desiccant could be harmful.

zIf the desiccant gets into your eyes or mouth, immediately rinse with plenty of water

and seek medical attention.

zKeep desiccant out of the reach of children.

4-ENGLISH

■Product list

The product names and model numbers of the projection lenses covered by this manual are

as follows.

Product name Model number Description

Zoom lens ET-D3LEW60C /

ET-D3LES20C

Projection lens equipped with an EEPROM*1

and stepping motor.

Fixed focus lens ET-D3LEW50C Projection lens equipped with an EEPROM*1.

*1 EEPROM: Electrically erasable programmable read-only memory

■Projectors supported by each projection lens

zET-D3LEW60C / ET-D3LES20C

PT-SRQ32KC / PT-SRZ31KC / PT-SRS30KC / PT-SRZ21KC / PT-SRS20KC

zET-D3LEW50C

PT-SRQ32KC / PT-SRZ31KC / PT-SRS30KC / PT-SRZ21KC / PT-SRS20KC / PT-SRQ13KC

PT-SRZ12KC / PT-SRS11KC / PT-SDZ21K2C / PT-SDS20K2C / PT-SDW17K2C /

PT-SDZ18K2C / PT-SDZ985C / PT-SDS955C / PT-SDW935C / PT-SDZ981C

Note

zSome of the alphabet letters at the end of projector model numbers may be omitted in this

manual.

zModels other than the above may also be supported. Refer to the operating instructions of

the projector you are using.

zIf the projector you are using is the PT-SRQ32KC / PT-SRZ31KC / PT-SRS30KC /

PT-SRZ21KC / PT-SRS20KC, the following versions are not supported.

- PT-SRQ32KC / PT-SRZ31KC / PT-SRS30KC: Earlier than 3.00

- PT-SRZ21KC / PT-SRS20KC: Earlier than 2.00

For details, contact your dealer.

zThe main version of the rmware can be checked in the [STATUS] screen.

■Supplied Accessories

Make sure that the following has been provided.

Part name Appearance (quantity)

Lens cover

1 each

(The product is

delivered with a lens

cover attached.)

Before Use

ENGLISH-5

Before replacing the projection lens

Return the projection lens to the home position before replacing or removing it.

For details on how to return the lens to the home position, refer to the operating

instructions of the projector.

Attention

zMake sure that the projector power supply is switched off before attaching or detaching the

projection lens.

zAfter removing the projection lens, store it safely away from vibration or impacts.

z Do not touch the electrical contacts of the projection lens with your  ngers. Dust and dirt on

the contacts may cause contact malfunctions, while static electricity may damage the unit.

zDo not touch the surface of the lens with bare hands. Finger prints and dirt on the surface

of the lens will be magni ed by the lens and lower the quality of the projected image. Place

the supplied lens cover on the zoom lens when the projector is not in use.

zThe lens is made of glass. The lens could be damaged if brought into contact with or

rubbed against hard objects. Handle the lens carefully.

zUse a clean, soft and dry cloth to wipe away dust and dirt from the projection lens.

Do not use ﬂ uffy cloths containing oil, water or dust for cleaning. The lens is easily

damaged, so do not apply excessive pressure when wiping it.

Attaching the Lens / Detaching the Lens

Attaching the Lens

Note

zIf the lens hole cover is already removed, start from step 3.

The illustrations in this procedure depict

attachment of the ET-D3LEW50C onto

the PT-SRZ21KC.

1) Loosen the lens hole cover

screw.

zUse a Phillips screwdriver to turn the

lens hole cover screw counterclock-

wise until it is in its loosened state.

ねじ

レンズホールカバー

Lens hole cover

Screw

2) Remove the lens hole cover.

z(i) While pressing the lens release

button, turn the lens hole cover

counterclockwise until its marker ()

aligns with the marker on the projec-

tor (to the left of "LOCK"). (ii) Then

remove the lens hole cover.

レンズリリースボタン

Lens release button

6-ENGLISH

Attaching the Lens / Detaching the Lens (continued)

3) (i) Insert the projection lens

while aligning its marker

(orange) with the marker on

the projector (to the left

of “LOCK”), and (ii) turn it

clockwise until it clicks into

place.

4) Use the lens drop prevention

screw supplied with the

projector to secure the

projection lens.

zUse a Phillips screwdriver to secure

the screw in hole A to the right of the

marker (orange) on the projection

lens.

目印（オレンジ色）

レンズ落下防止ねじ

ねじ穴 A

Marker (orange)

Screw

hole A

Lens drop prevention screw

Attention

zTurn the projection lens counterclockwise, and verify that it is secure.

zStore the removed lens hole cover safely for future use.

zAfter attaching the projection lens, turn on the projector and perform lens calibration.

(page 8)

ENGLISH-7

Attaching the Lens / Detaching the Lens (continued)

Peripheral focus adjustment function

When using the ET-D3LEW60C or ET-D3LEW50C, the focus balance between the center of

the projected image and the peripheral areas differs depending on the size of the image.

The ET-D3LEW60C and ET-D3LEW50C are equipped with a function for adjusting the

peripheral focus.

1) Operate the projector to align

the focus of the center of the

projected image.

2) Loosen the lock knob by

turning it counterclockwise.

Note

zThe screen sizes displayed on the lens are approximate guides.

3) Turn the peripheral focus

adjustment ring in the

directions of the arrows

to align the focus of the

peripheral areas of the image.

4) Tighten the lock knob by

turning it clockwise.

The illustrations in this procedure depict

attachment of the ET-D3LEW50C onto

the PT-SRZ21KC.

■Adjusting the focus

ロックつまみ

周辺フォーカス調整リング

Peripheral focus adjustment ring

Lock knob

8-ENGLISH

Lens calibration

Perform lens calibration after attaching the lens.

The lens calibration procedure differs depending on the projector you are using and the

main version of the rmware.

zPT-SRQ32KC / PT-SRZ31KC / PT-SRS30KC: Main version is 3.00 or later

Refer to "Case 1" (xpage 8).

zPT-SRZ21KC / PT-SRS20KC: Main version is 2.00 or later

Refer to "Case 1" (xpage 8).

zPT-SRQ13KC / PT-SRZ12KC / PT-SRS11KC / PT-SDZ21K2C / PT-SDS20K2C /

PT-SDW17K2C / PT-SDZ18K2C / PT-SDZ985C / PT-SDS955C / PT-SDW935C / PT-SDZ981C

Refer to "Case 2" (xpage 10). (Only ET-D3LEW50C is supported)

■Case 1

zPT-SRQ32KC / PT-SRZ31KC / PT-SRS30KC (main version of the rmware is 3.00 or later)

zPT-SRZ21KC / PT-SRS20KC (main version of the rmware is 2.00 or later)

Attaching the Lens / Detaching the Lens (continued)

1) Press the < 菜单 > button.

2) Use the ▲ and ▼ buttons to

select [PROJECTOR SETUP],

and press the < 执行 > button.

zThe [PROJECTOR SETUP] screen

appears.

3) Use the ▲ and ▼ buttons to

select [LENS], and press the

<执行 > button.

zThe [LENS] screen appears.

1/2

PROJECTOR SETUP

PROJECTOR ID ALL

PROJECTION METHOD

LENS

OPERATION SETTING NORMAL

LIGHT OUTPUT 100.0%

BRIGHTNESS CONTROL AUTO

STANDBY MODE NORMAL

NO SIGNAL SHUT-OFF DISABLE

NO SIGNAL LIGHTS-OUT DISABLE

INITIAL STARTUP LAST MEMORY

STARTUP INPUT SELECT LAST USED

DATE AND TIME

SUB MENU

MENU SELECT

执行

4) Use the ▲ and ▼ buttons to

select [LENS CALIBRATION],

and press the < 执行 > button.

zThe [LENS CALIBRATION] screen

appears.

zWhen the ET-D3LEW50C is

attached, a conrmation screen

appears when the < 执行 > button is

pressed. In such cases, proceed to

step 6.

SUB MENU

MENU SELECT

LENS

LENS TYPE ET-D3LEW60C

LENS INFORMATION SETTING

LENS MEMORY

LENS HOME POSITION

ACTIVE FOCUS OPTIMIZER

LENS CALIBRATION

执行

ENGLISH-9

Note

zIf lens calibration is not performed, the available zoom range will be narrowed.

Attaching the Lens / Detaching the Lens (continued)

5) Use the ▲ and ▼ buttons to

select [SHIFT/FOCUS/ZOOM],

and press the < 执行 > button.

zThe conrmation screen appears.

EXECUTE

MENU SELECT

LENS CALIBRATION : ET-D3LEW60C

SHIFT/FOCUS/ZOOM

SHIFT/FOCUS

ZOOM

执行

6) Use the and buttons to

select [OK], and press the < 执

行> button.

zLens calibration starts.

zThe projection lens moves to the

home position after adjustment range

calibration is complete.

LENS CALIBRATION : ET-D3LEW60C

Proceed LENS CALIBRATION,

and return to HOME POSITION.

EXECUTE

CHANGE

CANCEL

执行

10-ENGLISH

■Case 2

zPT-SRQ13KC / PT-SRZ12KC / PT-SRS11KC

zPT-SDZ21K2C / PT-SDS20K2C / PT-SDW17K2C / PT-SDZ18K2C

zPT-SDZ985C / PT-SDS955C / PT-SDW935C / PT-SDZ981C

Attaching the Lens / Detaching the Lens (continued)

1) Press the < 菜单 > button.

2) Use the ▲ and ▼ buttons to

select [PROJECTOR SETUP],

and press the < 执行 > button.

zThe [PROJECTOR SETUP] screen

appears.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

DISPLAY OPTION

3D SETTINGS

PROJECTOR SETUP

TEST PATTERN

SIGNAL LIST

SECURITY

NETWORK

MENU SELECT

SUB MENU

P IN P

执行

3) Use the ▲ and ▼ buttons to

select [LENS CALIBRATION].

2/3

INITIAL STARTUP

DATE AND TIME

STARTUP INPUT SELECT

TIME ZONE OFF

RS-232C

REMOTE2 MODE

FUNCTION BUTTON

LENS CALIBRATION

LENS MEMORY

NORMAL

STATUS

AC VOLTAGE MONITOR OFF

SAVE ALL USER DATA

PROJECTOR SETUP

LAST USED

DEFAULT

LAST MEMORY

EXECUTE

CHANGEMENU SELECT

执行

4) Use the and buttons to

select [NORMAL], and press

the < 执行 > button.

zThe conrmation screen appears.

5) Use the and buttons to

select [OK], and press the < 执

行> button.

zLens calibration starts.

zThe projection lens moves to the

home position after adjustment range

calibration is complete.

EXECUTE

CHANGE

执行

LENS CALIBRATION

Proceed LENS CALIBRATION,

and return to HOME POSITION.

CANCEL

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios para proyectores de Panasonic

Panasonic

Panasonic PressIT TY-WPS1 Manual de usuario

Panasonic

Panasonic ET-EMF320 Manual de usuario

Panasonic

Panasonic ET-DLE020 Manual de usuario

Panasonic

Panasonic ET-DLE170 Manual de usuario

Panasonic

Panasonic ET-LEC701 Guía

Panasonic

Panasonic ET-LAC100 Manual de usuario

Panasonic

Panasonic ET-D3QW200 Manual de usuario

Panasonic

Panasonic ET-SFR330 Manual de usuario

Panasonic

Panasonic ET-PKE200H Manual de usuario

Panasonic

Panasonic ET-LAD310A Manual de usuario

Panasonic

Panasonic ET-LAEF100 Manual de usuario

Panasonic

Panasonic ET-DLE030 Manual de usuario

Panasonic

Panasonic ET-ELW02 Manual de uso y cuidado

Panasonic

Panasonic ET-LAB50 Guía

Panasonic

Panasonic ET-RFF100 Guía

Panasonic

Panasonic ET-LAV100 Manual de usuario

Panasonic

Panasonic ET-EMF510 Manual de usuario

Panasonic

Panasonic ET-PKD75 Manual de usuario

Panasonic

Panasonic ET-SFR330C Manual de usuario

Panasonic

Panasonic ET-ELW21C Manual de usuario

Panasonic

Panasonic PressIT TY-WPS1 Manual de usuario

Panasonic

Panasonic Panaboard KX-BP535 Manual de usuario

Panasonic

Panasonic ET-D75LE8 Manual del sistema

Panasonic

Panasonic ET-RFL100 Manual de usuario

Manuales populares de Accesorios para proyectores de otras marcas

Optoma

Optoma BX-AL133B Manual de usuario

PEERLESS

PEERLESS PE 1120 Guía

Osram

Osram SIRIUS HRI Series Manual

Presentation Switchers

Presentation Switchers PS111 Manual de usuario

Kramer

Kramer VIA GO Manual de usuario

Yamaha

Yamaha PJL-112 Manual de lista de piezas

Swedstyle

Swedstyle CL23AA02ZA25E Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 236CB Manual del propietario

Epson

Epson BrightLink 475Wi Manual de usuario

Acer

Acer WP100 Manual de usuario

i3 i3board Manual de usuario

CHIEF

CHIEF HB-43E Manual de usuario

Biamp

Biamp Modena Hub Manual de servicio

NEC

NEC MP10RX Manual de usuario

Panamorph

Panamorph DCR-S3 Manual de usuario

Exact solutions

Exact solutions FRAME-EVO-P10 Manual de usuario

CHIEF

CHIEF VCM103S Manual de usuario

InFocus

InFocus LP70+ Guía