Panasonic ET-DLE020 Manual de usuario
日本語
FRANÇAIS
ENGLISH
Commercial Use
Model No. ET-DLE020
DPQX1396ZB/X1
Zoom lens
Operating Instructions
Thank you for purchasing this Panasonic product.
■To ensure correct use of this lens, please read the operating instructions supplied
with the lens and the projector carefully.
■Before using this product, be sure to read “Read this rst!” (Page 3).
■Please save this manual for future use.
2-ENGLISH
Read this rst! ......................................................................................3
Before Use.............................................................................................4
Preparation............................................................................................6
Before replacing the projection lens........................................................ 6
Attaching the Lens................................................................................... 6
Using the Lens Fixed Attachment for Portrait Installation........................ 9
Moving the Lens to the Home Position.................................................. 11
Lens Shift Adjustment............................................................................ 13
Detaching the Lens ............................................................................... 15
Focus Adjustment.................................................................................. 16
Projection relationships.....................................................................19
Lens shift ranges................................................................................21
Specications .....................................................................................23
Dimensions .........................................................................................23
Projected image size and Projection distance.......Appendix / Annexe / 付録 1
The "Appendix" can be found after the Japanese language section ( 日本語 ).
█ Contents
ENGLISH-3
Read this rst! Always follow these precautions
WARNING:
Do not look at or place your skin into the light emitted from the lens while the
projector is being used.
Doing so can cause burns or loss of sight.
zStrong light is emitted from the projector’s lens. Do not look at or place your hands
directly into this light.
zTurn off the power when moving away from the projection lens or projector.
Do not project an image with the lens cover attached.
zDoing so can cause re.
CAUTION:
Before replacing the projection lens, be sure to turn off the power and
disconnect the power plug from the wall outlet.
zUnexpected projection of light may cause injury to eyes.
zReplacing the projection lens without removing the power plug may result in electric
shock.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
zStrong light is emitted from the projector’s lens.
Do not place objects in front of the lens while the projector is being used.
Doing so can cause re, damage to the object, or malfunction of the lens and
projector.
zStrong light is emitted from the projector’s lens.
Do not open the desiccant bag. Do not eat the contents.
Inadvertently ingesting desiccant could be harmful.
zIf the desiccant gets into your eyes or mouth, immediately rinse with plenty of water
and seek medical attention.
zKeep desiccant out of the reach of children.
4-ENGLISH
■Supported projectors
PT-RCQ10 / PT-RCQ80 / PT-RZ120 / PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ870 /
PT-RZ770 / PT-RW730 / PT-RZ660 / PT-RW620
Note
zThis manual omits the alphabets at the end of projector model numbers.
zModels other than the above may also be supported. Refer to the operating instructions of
the projector you are using.
zEven if the projector you are using is an applicable model, use of this projection lens may
not be possible depending on the main version of the rmware.
If main version of the rmware is the version number shown below, update to the latest
rmware before use.
- PT-RZ120: Earlier than 2.00
- PT-RZ970 / PT-RW930 / PT-RX110: Earlier than 2.14
- PT-RZ870: Earlier than 1.02
- PT-RZ770 / PT-RW730 / PT-RZ660 / PT-RW620: Earlier than 1.16
For details on the update procedure, refer to the latest rmware information on the
Panasonic website (https://panasonic.net/cns/projector/pass/).
zThe main version of the rmware can be checked in the [STATUS] screen.
■Supplied Accessories
Make sure that the following has been provided.
Part name Appearance
Lens cover
1 each
Lens xed
attachment
x1
(The product is
delivered with a lens
cover attached.)
Before Use
ENGLISH-5
Before Use (continued)
■Names of lens xed attachment parts
Lens xing brackets (two, one
at top and one at bottom)
Front
Adjustment screws (two, one
at top and one at bottom)
Mounting screws
(total of eight)
Side
Lens guide
bracket
Phillips screws
(total of four)
Rear
Attachment mount
brackets (two, one at top
and one at bottom)
Base bracket
6-ENGLISH
Before replacing the projection lens
Return the projection lens to the home position before replacing or removing it.
For details on how to return the lens to the home position, refer to the operating
instructions of the projector.
Attention
zMake sure that the projector power supply is switched off before attaching or detaching the
projection lens.
zAfter removing the projection lens, store it safely away from vibration or impacts.
zDo not touch the electric contact points of the projection lens with your ngers. Dust and
dirt on the contacts may cause contact malfunctions, while static electricity may damage
the unit.
zDo not touch the surface of the lens with bare hands. Finger prints and dirt on the surface
of the lens will be magnied by the lens and lower the quality of the projected image. Place
the supplied lens cover on the zoom lens when the projector is not in use.
zThe lens is made of glass. The lens could be damaged if brought into contact with or
rubbed against hard objects. Handle the lens carefully.
zUse a clean, soft and dry cloth to wipe away dust and dirt from the projection lens.
Do not use uffy cloths containing oil, water or dust for cleaning. The lens is easily
damaged, so do not apply excessive pressure when wiping it.
Preparation
Attaching the Lens
Attach this lens together with the lens xed attachment.
Attention
zBefore attaching the Projection Lens, remove the lens hole cover (only lens options
models) and the two lens covers attached to the Projection Lens.
The illustrations in this procedure depict
use of the PT-RZ970 series as an example.
1) (i) Turn the lens mount cover
counterclockwise, and (ii)
remove it.
zStore the removed lens mount cover
in a safe place so that it will not be
lost.
Lens Mount Cover
(ii)(ii)
(i)
(i)
ENGLISH-7
Preparation (continued)
2) Loosen the mounting screws in
four places on the attachment
mount bracket.
zProvide a gap of about 2 mm
between the attachment mount
bracket and base bracket.
3) Pull together the tabs at the top
and bottom of the attachment
mount bracket and align the
lens fixed attachment with the
circular recesses in the front
panel of the projector.
4) Push the tabs of the attachment
mount bracket against the
recesses in the base bracket
and then tighten the mounting
screws in four places.
Attention
zPush the tabs so that they are parallel
against the recesses.
Mounting
screws
Mounting
screws
Mounting
screws
Mounting
screws
Tabs
Tabs
8-ENGLISH
Preparation (continued)
5) Loosen the lens fixing bracket
mounting screws in four
places.
6) Turn the adjustment screws to
fix the lens fixing brackets in
place at the top and bottom,
respectively.
Adjustment screw
Adjustment
screw
Mounting
screws
(ii)(ii)
(i)
(i)
Guide groove
Positioning guide
7) Align the positioning guide on
the lens with the guide groove
on the projector and insert
the lens all the way into the
projector (i), and then turn the
lens clockwise until it clicks
into place (ii).
ENGLISH-9
Preparation (continued)
Using the Lens Fixed Attachment for Portrait Installation
To use this lens for portrait installation, you need to reattach the lens xed attachment
differently.
1) Remove the Phillips screws
in four places with a Phillips
screwdriver and then separate
the base bracket and lens
guide bracket.
Phillips screws
Notches
2) Rotate the lens guide bracket
90° and align attach it so that
the notches are aligned with
the protrusions of the base
bracket.
10-ENGLISH
Preparation (continued)
3) Fix the lens guide bracket
and base bracket with Phillips
screws in four places.
Phillips screws
Note
zThe base plate attachment procedure is the same as before you reattached the lens xed
attachment differently.
The lens xing brackets are positioned at the top and bottom for portrait installation.
Tabla de contenidos
Otros manuales de Accesorios para proyectores de Panasonic
Panasonic
Panasonic ET-PFD560 Manual de usuario
Panasonic
Panasonic ET-LAE200C Manual de usuario
Panasonic
Panasonic ET-ELW02 Manual de uso y cuidado
Panasonic
Panasonic Panaboard KX-BP535 Manual de usuario
Panasonic
Panasonic ET-UW100 Manual de usuario
Panasonic
Panasonic ET-EMF510 Manual de usuario
Panasonic
Panasonic ET-PFD465 Manual de usuario
Panasonic
Panasonic ET-LAEF100 Manual de usuario
Panasonic
Panasonic PressIT TY-WP2B1 Manual de usuario
Panasonic
Panasonic ET-LAL331 Manual de usuario
Panasonic
Panasonic PressIT TY-WPSC1 Manual de usuario
Panasonic
Panasonic ET-EMW200 Manual de usuario
Panasonic
Panasonic PressIT TY-WPS1 Manual de usuario
Panasonic
Panasonic ET-SFR330C Manual de usuario
Panasonic
Panasonic ET-LAL100 Manual de usuario
Panasonic
Panasonic ET-ELW21 Manual de usuario
Panasonic
Panasonic ET-LAD10000 Manual de usuario
Panasonic
Panasonic ET-LAL330 Manual de usuario
Panasonic
Panasonic ET-RFL100 Manual de usuario
Panasonic
Panasonic ET-LAV100 Manual de usuario
