Panasonic Transistors 2SD1823 Manual de usuario
Transistors
1
Publication date: April 2003 SJC00229BED
2SD1823
Silicon NPN epitaxial planar type
For low-frequency amplification
■Features
•High forward current transfer ratio hFE
•Low collector-emitter saturation voltage VCE(sat)
•High emitter-base voltage (Collector open) VEBO
•Low noise voltage NV
•S-Mini type package, allowing downsizing of the equipment
and automatic insertion through the tape packing and the maga-
zine packing.
■Absolute Maximum Ratings Ta=25°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) VCBO 50 V
Collector-emitter voltage (Base open) VCEO 40 V
Emitter-base voltage (Collector open) VEBO 15 V
Collector current IC50 mA
Peak collector current ICP 100 mA
Collector power dissipation PC150 mW
Junction temperature Tj150 °C
Storage temperature Tstg −55 to +150 °C
Parameter Symbol Conditions Min Typ Max Unit
Collector-base voltage (Emitter open) VCBO IC=10 µA, IE=050V
Collector-emitter voltage (Base open) VCEO IC=1 mA, IB=040V
Emitter-base voltage (Collector open) VEBO IE=10 µA, IC=015V
Collector-base cutoff current (Emitter open)
ICBO VCB =20 V, IE=0 0.1 µA
Collector-emitter cutoff current (Base open)
ICEO VCE =20 V, IB=01µA
Forward current transfer ratio *hFE VCE = 10 V, IC= 2 mA 400 2
000
Collector-emitter saturation voltage VCE(sat) IC=10 mA, IB=1 mA 0.05 0.20 V
Transition frequency fTVCB =10 V, IE=−2 mA, f =200 MHz 120 MHz
■Electrical Characteristics Ta=25°C ±3°C
Unit: mm
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. *: Rank classification
2.1
±0.1
1.3
±0.1
0.3
+0.1
–0.0
2.0
±0.2
1.25
±0.10
(0.425)
1
3
2
(0.65) (0.65)
0.2
±0.1
0.9
±0.1
0 to 0.1
0.9
+0.2
–0.1
0.15
+0.10
–0.05
5°
10°
Rank R S T
hFE 400 to 800 600 to 1
200 1
000 to 2
000
Marking symbol: 1Z
1: Base
2: Emitter
3: Collector
EIAJ: SC-70
SMini3-G1 Package
This product complies with the RoHS Directive (EU 2002/95/EC).
2SD1823
2SJC00229BED
VCE(sat) IChFE ICfTIE
PCTaICVCE ICVBE
Cob VCB
0 16040 12080
0
200
160
120
80
40
Collector power dissipation PC(mW)
Ambient temperature Ta(°C)
012108264
0
160
120
40
80
T
a
=25°C
20 µA
30 µA
40 µA
50 µA
60 µA
70 µA
80 µA
90 µA
10 µA
I
B
=100 µA
Collector current I
C
(mA)
Collector-emitter voltage V
CE
(V)
0 2.01.60.4 1.20.8
0
120
100
80
60
40
20
V
CE
=10 V
T
a
=75°C−25°C
25°C
Base-emitter voltage VBE (V)
Collector current IC(mA)
0.1 1 10 100
0.01
0.1
1
10
100 I
C
/ I
B
=10
25°C
−25°C
T
a
=75°C
Collector-emitter saturation voltage V
CE(sat)
(V)
Collector current I
C
(mA)
0.1 1 10 100
0
1 800
1 500
1 200
900
600
300
V
CE
=10 V
T
a
=75°C
25°C
−25°C
Forward current transfer ratio h
FE
Collector current I
C
(mA)
−0.1 −1−10 −100
0
250
200
150
100
50
V
CB
=10 V
T
a
=25°C
Transition frequency f
T
(MHz)
Emitter current I
E
(mA)
1 10 100
0
8
6
2
4
I
E
=0
f =1 MHz
T
a
=25°C
Collector-base voltage VCB (V)
Collector output capacitance
(Common base, input open circuited) C
ob
(pF)
This product complies with the RoHS Directive (EU 2002/95/EC).
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
–Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Otros manuales de Hardware de red de Panasonic
Panasonic
Panasonic Transistors 2SC1318 Manual de usuario
Panasonic
Panasonic WJ-PB85Y08 Manual de usuario
Panasonic
Panasonic Rectifier Diodes MA2J115 (MA115) Manual de usuario
Panasonic
Panasonic SH-ALL1C Manual de usuario
Panasonic
Panasonic AJ-DE77P Manual de usuario
Panasonic
Panasonic BB-HCS301A - Network Camera Server Instrucciones de funcionamiento
Panasonic
Panasonic Chip RC Networks EZACT Guía del usuario
Panasonic
Panasonic WU-SX04 Manual de usuario
Panasonic
Panasonic Schottky Barrier Diodes MA2SE01 Manual de usuario
Panasonic
Panasonic WJ-PB65E01 Manual de usuario
Panasonic
Panasonic Schottky Barrier Diodes MA6J786Y Manual de usuario
Panasonic
Panasonic CZ-CFUSCC1 Manual de usuario
Panasonic
Panasonic PIN Diodes MA2SP060G Manual de usuario
Panasonic
Panasonic Switching Diodes MA2S101 Manual de usuario
Panasonic
Panasonic Switching Diodes MA3J142AG Manual de usuario
Panasonic
Panasonic Zener Diodes MAZQxxx Series Manual de usuario
Panasonic
Panasonic Switching Diodes MA2Z001 Manual de usuario
Panasonic
Panasonic Transistors 2SC3930G Manual de usuario
Panasonic
Panasonic MGA-ML4TWPoE++ Manual de usuario
Panasonic
Panasonic Transistors 2SC3937G Manual de usuario
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
