Panasonic CF-37 Series Manual de usuario

CF-37 Series

Reference Manual

Personal Computer

Contents

We recommend that this Reference Manual be printed.

NOTE:NOTE provides a useful fact or helpful information.

CAUTION:CAUTION indicates a condition that may result in minor or moderate injury.

WARNING:WARNING indicates a hazard that may result in moderate or serious injury.

[Start]-[Shut Down]: This illustration means to click [Start], then to click [Shut Down].

(For some applications, you may need to double-click.)

Enter : This illustration means to press the [Enter] key.

Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.

page: When the cursor is moved to an item under [Contents] or to page (green display), the

shape of the cursor will change to . Under this condition, if characters are tapped (or a

click is made), the corresponding page in the Reference Manual will be displayed.

: This illustration means to refer to the Operating Instructions.

Illustrations in this Reference Manual

Read Me First......................................................2

Key Combinations ..............................................4

LED Indicators....................................................5

Touch Pad (Advanced) .......................................6

Touchscreen .....................................................11

Panasonic HandWriting (Touchscreen) .........13

Display RotationTool .......................................14

Suspend/Hibernation Functions .....................15

Security Measures ...........................................18

Computing OnThe Road..................................22

Battery Power ...................................................23

Multimedia Pocket ............................................30

CD-ROM/DVD-ROM Drive.................................31

SuperDiskTM Drive .............................................34

PC Cards ...........................................................35

RAM Module......................................................36

Printer................................................................37

External Display ...............................................38

USB Devices .....................................................42

Infrared Data Communications .......................43

Modem...............................................................45

Hard Disk Drive.................................................46

Setup Utility ......................................................47

Smart Boot........................................................53

Technical Information ......................................54

DMI Viewer ........................................................55

List of Error Codes...........................................56

DealingWith Problems (Advanced) ................58

Do not power off your computer or press the SuperDisk drive eject button while

the MP indicator ( ) is on.

Doing so may damage the data on the disk and render the disk useless.

Use care when handling disks.

To protect the data on your disks or to prevent a disk from becoming stuck in your

computer, avoid the following:

• Sliding the shutter on the disk manually.

• Exposing the disk to a magnetic field.

• Storing the disk in locations prone to high temperatures, low pitched noise, dampness, or

dust.

• Applying more than one label on the disk.

Confirm the contents of a disk before formatting it.

Confirm that no important data is on the disk, because all data on the disk will be

erased.

Use the write-protect tab.

Thisisamustforpreservingimportantdata.

This prevents your data from being erased

or overwritten.

Do not expose your computer to shock.

Please use care when handling your computer, shock may damage your hard disk

or make your software applications and data unusable.

Do not power off your computer while software applications are running or

HDD indicator ( ) is on.

Properly shutWindows* down to avoid problems ([Start] - [Shut Down] ).

Save all valuable data to disks.

Backing up data to disks will limit damage should trouble occur to your computer or

should you inadvertently change or erase data.

Use the security function for all important data. ( page 18)

Saving Data on the Hard Disk

*This computer uses Microsoft®Windows®98 Second Edition Operating System.

Write Enable Write Disable

Write-protectTab

Saving Data on Disks

Users are advised to purchase the latest versions of virus protection software

and use them regularly.

ComputerViruses

We recommend you run the software:

• When booting your computer.

• After receiving data.

We recommend that you check data received on disks or from external sources,

such as data downloaded from the Internet, e-mail, etc. (For compressed files,

please uncompress them before running a check).

In this manual, the followings are described as disks.

When using disks, an optional SuperDisk Drive Pack (CF-VFS371) is needed.

SuperDisk (120 MB)

Floppy disk (720 KB, 1.44 MB)

NOTE

LCD Panel High-precision and advanced technologies are necessary in the production of color

liquid crystal displays (color LCDs).Therefore, if 99.998% or more of the picture

elements are functioning properly, no defect is considered to exist.

Read Me First

Environment

Place the computer on a flat stable surface.

In use: Temperature: 5 °C to 35 °C {41 °F to 95 °F}

Humidity: 30% to 80% RH (No condensation)

Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}

Humidity: 30% to 90% RH (No condensation)

Usage Environment

Such areas may result in damage to the computer.

Areas with electronic equipment

These areas may interfere with your display or

cause your computer to produce strange sounds.

Areas with extremely high/low temperatures

Places not to use your computer

Do not leave things near the computer that are sensitive to heat. During opera-

tion, the computer may become warm.

Handling

This computer has been designed so as to minimize shock to the LCD and hard disk

drive, the leakage of liquid (e.g., water) from the keyboard, etc., but no warranty is pro-

vided against such trouble. Therefore, as a precision instrument, please be extremely

careful in the handling.

Do not drop or hit your computer against solid objects.

Do not stand the computer on its side or allow it to tip over. When the computer receives

extremely strong shock after falling, the hard disk or floppy disk drive, etc., may become

inoperable.

Do not carry your computer when it is ON.

Remove all cables before transporting your computer.

We recommend preparing a fully charged battery (and optional charger, if possible).

When transporting spare batteries inside a package, briefcase, etc., it is recommended

that the batteries be stored in a plastic bag.

Do not place the computer upright. When the computer receives extremely strong shock

after falling, the hard disk or floppy disk drive, etc., may become inoperable.

Do not carry the computer while the display is open, or carry it by gripping the display.

Do not put anything (e.g., a piece of paper) between the display and keyboard.

Always carry your computer with you. Never check it in with luggage. For use of the

computer inside an aircraft, we recommend asking the airlines regarding their policy on

this issue.

It is a good idea to make backup copies on disks and carry them with you.

Do not leave a disk in the drive while transporting your computer.

Read Me First

Maintenance

Areas excluding the display

Wipe these areas with a soft cloth, after apply-

ing water or detergent diluted with water to the

softcloth andfirmly wringingout excesswater.

Display

Use a soft dry cloth like gauze to lightly

wipe the display.

Touch Pad

page 8

CAUTION

Pressing this key combination adjusts the brightness

of LCD. The brightness setting is stored in memory

separately under the condition the ACadapter is con-

nected and under the condition the AC adapter is not

connected.

By pressing this key combination, you can select ei-

ther an external display, LCD or simultaneous, even

if an external display is not connected. Rebooting

the computer, or powering off then on, restores the

display setting of the Setup Utility.

Pressing this key combination turns off audio from the

internal speakers and headphone jack. Pressing it

again, orrebooting the computerrestores the speaker

setting of the Setup Utility.

Pressing this key combination adjusts the volume of

the internal speakers and headphone jack.

Pressing this key combination causes the current

screen on the display to be saved to memory, and

powers off the computer. When the computer is pow-

ered on, by sliding the power switch, the saved screen

will be displayed. (The computer must be plugged

into the AC adapter or have a battery pack with suffi-

cient remaining power installed.)

Pressing this key combination displays the remain-

ing battery capacity on the screen. page 23

Pressing this key combination turns off the LCD, ex-

ternal display and hard disk drive until operation is

resumed by pressing any key or mouse*4 (except the

keyboard and mouse connected to the USB port).

Key Combinations

Do not press the following key combinations repeatedly in (quick) succession.

Do not press the following key combinations while using the touch pad (mouse) or other keys.

When a MIDI file is playing, do not use the following key combinations. The tempo of the MIDI file may temporarily slow.

LCD brightnesscontrol

(down)

LCD brightness control

(up)

Display change

Speakers on/off switch

Volume control

(down)

Volume control ( up)

Holding down on the keys

changes the sound level.

Power off using the

suspend function

WithWindows 98, this

key combination is not

supported

Remaining capacity of

the battery pack

ECO mode for conserv-

ing power

Fn + F1

Fn + F3

Fn + F4

Fn + F5

Fn + F7

Fn + F8

Fn + F9

Fn + F

Fn + F6

Is displayed when

the brightness is at

its maximum value.

Key Functions PopupWindow

OFF

Down

Disabling the speakers will also disable the warn-

ing beep.

Remaining

capacity (%)

display

Battery pack is

not installed.

NOTE

Fn + F2

This key combination cannot be used to adjust the vol-

ume of the warning beep and the touchscreen sound.

*1When the Dual-Display is used, this key combination becomes inoperable.

*2Under the condition the sound function of Windows is not working, or is displayed, but the volume does not change.

*3 When [Disable] is set for [Fn+F7/Fn+F10 key] with the Setup Utility, these key combinations become inoperable.

*4 This "mouse" indicates the touch pad, the touchscreen and an external mouse.

Is displayed when

the brightness is at

its minimum value.

This indicator lights green when Caps Lock is pressed. Subsequent non-

shifted input is capitalized.

These indicators light green when NumLk is pressed. This causes a por-

tion of the keyboard to function as a numeric keypad. The [Enter] key

functions differently depending on the application.

This indicator lights green when ScrLk is pressed. Scroll lock functions

differently depending on the application.

This indicator lights when the hard disk drive is accessed.

This indicator lights when the multimedia pocket device (CD-ROM drive,

DVD-ROM drive or SuperDisk drive) is accessed.

When the battery pack (including the adapter) is set in the Multimedia

Pocket, the Multimedia Pocket device status LED shows the same indica-

tions as the battery pack status LED (see below).

Not lit : AC adapter not connected or charging not being per-

formed.

Orange : Charging in progress.

Green : Charging finished.

Red : Battery is low

(remaining battery capacity is approx.9% or less).

Blinking red : Battery pack or charging malfunction.

Blinking orange : Battery capacity being refreshed.

Blinking orange five times after the AC adapter is connected :

Charging on standby.(The ambient temperature is out-

side the allowable range. Once the allowable range

requirementissatisfied, chargingbegins automatically.)

Not lit : Power off

Green : Power on

Blinking green : Suspend mode

Caps Lock

NumLk(Numeric key)

ScrLk (Scroll lock)

Hard disk status

Multimedia pocket

device status

Battery pack

status

Power status

LED Indicators

NOTE

MP is the abbreviation for Multimedia Pocket.

Touch Pad (Advanced)

Use the touch pad to move the cursor on the display and perform normal computer operations.

Left Button

Right Button

Work Surface

(To next page)

Operate after pressing the two buttons simulta-

neously.

Twoquicktaps,butonthe

second tap leaving your

finger down (applying

pressure) and moving it

on the work surface.

While holding down the

button, moving your fin-

ger on the work surface.

*In [Start] - [Settings] - [Control Panel] - [Mouse] - [Tapping]

Basic Operation

Function Touch Pad Operation

Moving the Cursor

Tapping/Clicking

Double-Tapping/

Double-Clicking

Dragging

Scroll*

Scroll a document

(rotate the wheel)

Auto Scroll*

Automatically scroll a document

Move the tip of your finger

lightly over the surface.

When a check mark is added for [Drag

Lock] *

After the drag operation (above: left side), it is

necessary to determine the destination (i.e.,

location of drop) by one tap. Under the condi-

tion no destination is selected, do not use the

suspend or hibernation function. Nothing is

shownon thedisplay, evenafter resumingfrom

the suspend or hibernation mode.

In this case, the display will return after a tap

or click is made.

tapping clicking

double-tapping double-clicking

When releasing the auto scroll function:

One tap on the work surface.

The touch pad has been designed to work only when a finger is used. Therefore, do

not use any implement on the touch pad.

NOTE

Operate while holding down the two buttons.

Ctrl +

Magnify

Reduce

Pan*

Scroll in various directions of a

document

Zoom*

Magnify/reduce the display of a

document.

Data Zoom*

Display or hide a document, or

perform operations to return to or

proceed with Internet Explorer.

Function Touch Pad Operation

Shift +

*Indicates that the movements will differ depending on the application.

When an external mouse or trackball with additional functions (e.g., wheel func-

tion) is connected, a part or all of the additional functions may fail to operate. To

use these additional functions, install the driver or application software of the

external device by following the procedure below. However, once the driver or

application software is installed, touch pad functions (e.g., auto scroll) may not

operate even if the touch pad is enabled (see the procedure for “When you want

to re-enable the touch pad.”).

Power off your computer ( "Starting Up/Shutting Down") and connect

the external mouse or trackball device to the computer.

Turn the power on and run the Setup Utility ( page 47). In [Main] menu,

set [Touch Pad] to [Disable] and close the Setup Utility.

Following the operating instructions for the connected external mouse, install

the necessary driver.

When you want to re-enable the touch pad;

In [Start] - [Settings] - [Control Panel] - [System] - [Device Manager], when an

external mouse or trackball device is displayed in [Mouse], press [Remove] to

delete it, and then press [OK] to confirm the deletion.

Power off your computer ( "Starting Up/Shutting Down") and remove

the external mouse or trackball device.

Turn the power on and run the Setup Utility ( page 47). In [Main] menu,

set [Touch Pad] to [Enable] and close the Setup Utility.

Confirm whether [Alps GlidePoint] exists in [Mouse] (in [Control Panel] - [Sys-

tem] -[Device Manager]).

(To next page)

Touch Pad (Advanced)

CAUTION

It is possible that no input is accepted from the touch pad while typing is being

performed. To change the settings, add the check mark for [Tap off when typing]

in [Start] - [Settings] - [Control Panel] - [Mouse] - [Tapping].( page 10)

Handling theTouch Pad

Do not place any object on the work surface or press down forcefully with sharp-

pointed objects (i.e.nails), hard objects that can leave marks (i.e.pencils and ball

point pen).

Do not allow contact with substances that could dirty the touch pad, such as oil.

The cursor may not work properly in such cases.

When the touch pad becomes dirty:

Wipe to remove dirty areas by using a dry soft cloth such as a gauze or soft cloth

first applied with detergent diluted with water and then thoroughly wrung.

Do not use benzene or thinner, or disinfectant-type alcohol.

Touch Pad (Advanced)

CAUTION

When [PS/2 Compatible Mouse] is displayed instead of [ALPS GlidePoint]

in [Start] - [Settings] - [Control Panel] - [System] - [Device Manager] - [Mouse]:

Select [PS/2 Compatible Mouse] and then press [Properties].

Select [Driver] - [Update Driver] and then press [Next].

Select [No, select drive from list] and then press [Next].

At the [Device DriverWizard], select [Alps GlidePoint] and press [Finish].

At the [Insert Disk], press [OK].

Input [c:\util\drivers\mouse] and then press [OK].

Press [Close].

Touch Pad (Advanced)

(To next page)

Select from the taskbar or select [Mouse] from [Start] -

[Settings] - [Control Panel]

Set the function to be activated when pressing the left button.

Set the function to be activated when

pressing the right button.

Set the function to be activated when

pressing the left and right buttons si-

multaneously.

Set the function when double-clicking

either button or the surface of theTouch

Pad.

Click [Buttons]

page 10

Configuring theTouch Pad

When needed, the touch pad can be configured using the following steps.

Press this button to return all settings (including the Options settings) of the Buttons

settings display to the factory settings.

It is also possible to change the double-click time in [Windows] for [Start] - [Pro-

grams] - [Updd] - [Settings] ( page 12). However, when the double click time

in [Windows] is changed, the double-click speed in [Buttons] is changed. In

addition, the setting in [Buttons] takes effect after the computer is restarted or

enters the suspend or hibernation mode.

The scroll function (including the auto scroll function) may not operate depending

on the application. In addition, its response may be slow for rapid repeating actions.

For more information, refer to on-line help.

NOTE

Click [Gestures]

In the top corners of theTouch Pad, set the func-

tions to be activated. To change the functions,

make selections from within the list boxes.

Easy Launcher can be operated simply by click-

ing the mark in the top corner when the Easy

Launcher function is set.

Easy Capture can be operated simply by click-

ing the mark in the top corner when the Easy

Capture function is set. page 10

Set whether to enable or disable the scroll function. When the scroll function is used,

scrolling operations are possible even when the pointer is not moved to the scroll bar.

In addition, it is possible to perform the operations of zoom and data zoom.

page 10

When Easy Launcher is operated, the window displayed

on the right is shown. With Easy Launcher, it is possible

to start an application, shutWindows down, or operate a

window. Some applications may be unable to be closed

or minimized. In such cases, try pressing the Exit button

or the Minimize button in the application.

NOTE

When Easy Capture is operated, the window display on

the right is shown. With Easy Capture, it is possible to

paste an image or characters to the currently running ap-

plications with theTouch Pad.

Click [Options]

Set the scroll speed for when the scroll function is

enabled.

Set the area for scroll operations on theTouch Pad

and the area of operation of each mark (in each

corner).

The regions where the scrolling areas in the hori-

zontal and vertical directions overlap become the

operating areas of the marks.

If the box is checked, is displayed on the task

bar.

Touch Pad (Advanced)

Click [Tapping]

Adjust the tapping speed on the work surface.

If the box is checked, it is possible to make a drag

lock settingwherebythedrag conditionis maintained

after dragging via a tap operation even if the hand

leaves the work surface. In addition, it is possible to

select the method of release from the drag condi-

tion, i.e., [Auto Release] or [Tap Release]. When

[Auto Release] is selected, it is possible to set the

time for release.

Click [OK]

CAUTION

When [Tap Release] is set, do not enter the suspend or hibernation mode during

drag lock. After resuming, nothing will be shown on the display.

In such cases, tap the work surface or click a button.

Make necessary changes

If the box is checked, there is no response when theTouch Pad is tapped while typing

is being performed. It is possible to adjust the time to return to the tap function

enabled condition after the typing has stopped, i.e., from [Short] to [Long], with [Delay

after last key is hit].

Make necessary changes, click [OK].

Otros manuales para CF-37 Series

Tabla de contenidos

Otros manuales de Computadora portátil de Panasonic

Panasonic

Panasonic CF-Y5 Series Diagrama de cableado

Panasonic

Panasonic Toughbook CF-47K4CJAAM Manual de usuario

Panasonic

Panasonic CF-74 Series Manual de usuario

Panasonic

Panasonic CF-19 series Manual de usuario

Panasonic

Panasonic CF-T8 series Diagrama de cableado

Panasonic

Panasonic CF-T5LWETZ1 Manual de usuario

Panasonic

Panasonic Toughbook CF-28 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-C1ADAAZ6M Manual de usuario

Panasonic

Panasonic Toughbook CF-18BHAZXDM Manual de usuario

Panasonic

Panasonic Toughbook CF-W2DWB02KM Manual de usuario

Panasonic

Panasonic CF-29CRKGZKM - Toughbook 29 - Pentium M 1.2... Manual de usuario

Panasonic

Panasonic CF-19KCRC66M Manual de usuario

Panasonic

Panasonic Toughbook CF-52GFNBX2M Manual de usuario

Panasonic

Panasonic Toughbook CF-30Mk2 Manual de usuario

Panasonic

Panasonic Toughbook CF-29F3K15KK Manual de usuario

Panasonic

Panasonic Toughbook CF-H1ADBBZCM Manual de usuario

Panasonic

Panasonic CF-R1 Series Manual de usuario

Panasonic

Panasonic CF-T8 series Manual de usuario

Panasonic

Panasonic Toughbook CF-52EKMxDxM Manual de usuario

Panasonic

Panasonic Toughbook CF-T5MWETABM Manual de usuario

Panasonic

Panasonic Toughbook CF-30K3PAX2M Manual de usuario

Panasonic

Panasonic Toughbook CF-31ATA112M Manual de usuario

Panasonic

Panasonic Toughbook CF-H2ALFHA1M Manual de usuario

Panasonic

Panasonic CF-19 series Manual de usuario

Manuales populares de Computadora portátil de otras marcas

HP ze2401xt - Pavilion Notebook PC Manual de usuario

Velocity

Velocity NoteMagix M10 Manual de usuario

Dell

Dell Alienware 17 R2 Manual de usuario

Toshiba

Toshiba A105-S2236 Manual de usuario

HP ENVY 17 Manual

Winbook

Winbook LM Manual de usuario

Dell

Dell Inspiron 1464 Manual de usuario

Dell

Dell Inspiron 15R 5537 Manual de usuario

HP PROBOOK 4520S Manual

Dell

Dell Latitude ATG D620 Manual de usuario

Sony

Sony VAIO PCG-FX270 Manual de usuario

Dell

Dell Latitude 7310 Manual de usuario

Dell

Dell Precision GU806 Manual de usuario

Sony

Sony VAIO PCG-R505JLK Manual de usuario

Lenovo

Lenovo THINKPAD X32 Manual de usuario

HP Compaq tc4200 Guía de inicio rápido

Toshiba

Toshiba mini NB300 Manual de usuario

Lenovo

Lenovo ThinkPad X201 Tablet Manual